H3C WA2620i-AGN-FIT刷胖模式CRT
- 0关注
- 1收藏，2806浏览
最佳答案
检查一下文件是不是损坏了或者是没有下对软件版本，官网重新下一份：https://www.h3c.com/cn/d_201511/896971_30005_40.htm，或者看看是不是传输过程中出现了问题尽量用tftp传输
AP瘦切胖配置方法
目录
1.1 适用产品系列
本手册适用于如下产品：WAP712C、WAP722E、WAP722S、WAP722、WAP621。其他型号的AP能否支持胖瘦切换，可在新华三官网的“产品支持与服务>文档中心”中确认。
1.1.1 AP瘦切胖配置案例（命令行）
操作风险提示：AP瘦切胖有风险，操作不当或者意外断电会导致设备故障，操作需谨慎。WAP722E和、WAP722没有Console口，建议使用Telnet方式登入命令行
命令行升级需在PC上搭建TFTP Server（推荐用户使用3CDaemon搭建TFTP服务器）
将软件版本下载到设备FLASH内，然后通过命令行加载Bootrom版本，再加载主机软件版本，加载时输入的文件名一定要一致，建议复制黏贴，然后升级过程中避免断电重启操作。
具体操作如下：
1.
AP型号和使用版本关系：
| AP-mode | 版本名称 |
| H3C WAP621 | wa2600a_fat.bin |
| H3C WAP722 | wa4300_fat.bin |
| H3C WAP722E | |
| H3C WAP722S | wa4300s_fat.bin |
| H3C WAP712C |
2.
3.
<H3C> system
[H3C] interface vlan1
[H3C-Vlan-interface1] ip address 192.168.0.2 255.255.255.0
[H3C-Vlan-interface1] quit
4.
<H3C> tftp 192.168.0.1 get wa2600a_fat.bin
File will be transferred in binary mode.
Downloading file from remote tftp server, please wait........................................................................................................................
TFTP: 4602950 bytes received in 115 second(s).
File downloaded successfully.
备注：如果提示FLASH空间不足已放下新版本请将老版本删除，删除后请勿重启，否则设备已无系统，只能通过bootrom升级。
<H3C>delete /unreserved wa2600a_fit.bin
//如果空间不够，可以删除原有的软件版本释放存储空间
<H3C> tftp 192.168.0.1 get wa2600a_fat.bin
5.
<H3C> bootrom update file wa2600a_fat.btm（此步忽略）
please wait ...
Bootrom is updated!
6.
<H3C> boot-loader file wa2600a_fat.bin main
<H3C> reboot
7.
1.1.2 AP瘦切胖配置案例（Bootrom）
1.
2.
3.
===============<EXTEND-BOOTWARE MENU>=========================
|<1> Boot System
|<2> Enter Serial SubMenu
|<3> Enter Ethernet SubMenu
|<4> File Control
|<5> Restore to Factory Default Configuration
|<6> Skip Current System Configuration
|<7> BootWare Operation Menu
|<8> Clear Super Password
|<9> Storage Device Operation
|<0> Reboot
===============================================================
Ctrl+C: Display Copyright
Ctrl+F: Format File System
Enter your choice(0-9): Ctrl+F
y
Enter your choice(0-9): 3（此处输入）
================<Enter Ethernet SubMenu>==========================
|Note:the operating device is flash
|<1> Download Application Program To SDRAM And Run
|<2> Update Main Application File
|<3> Update Backup Application File
|<4> Update Secure Application File
|<5> Modify Ethernet Parameter
|<0> Exit To Main Menu
|<Ensure The Parameter Be Modified Before Downloading!>
=============================================================
4.
Enter your choice(0-5): 5
===========<ETHERNET PARAMETER SET>=====================
|Note: "." = Clear field.
| "-" = Go to previous field.
| Ctrl+D = Quit.
===============================================================
Protocol (FTP or TFTP) : TFTP
//忽略输出内容，直接输入TFTP，然后回车
Load File Name :wa2600a_fat.bin
//忽略输出内容，直接输入wa2600a_fat.bin，然后回车
Target File Name :wa2600a_fat.bin
//忽略输出内容，直接输入wa2600a_fat.bin，然后回车
Server IP Address :192.168.0.1
//忽略输出内容，直接输入电脑主机的 IP，比如192.168.0.1，然后回车
Local IP Address :192.168.0.50
//忽略输出内容，直接输入和电脑主机的ip同一网段，比如192.168.0.50，然后回车
Gateway IP Address :0.0.0.0
//忽略输出内容，直接回车
备注：注意给电脑手动配置一个与AP同网段的IP地址，保证电脑与AP路由可达
=============<Enter Ethernet SubMenu>==========================
|Note:the operating device is flash
|<1> Download Application Program To SDRAM And
|<2> Update Main Application File
|<3> Update Backup Application File
|<4> Update Secure Application File
|<5> Modify Ethernet Parameter
|<0> Exit To Main Menu
|<Ensure The Parameter Be Modified Before Downloading!>
=============================================================
Enter your choice(0-5): 2 //此时可以看到TFTP服务器上数据上传的滚动
Loading.....................................................................
....................................Done!
5.
=================<Enter Ethernet SubMenu>==========================
|Note:the operating device is flash
|<1> Download Application Program To SDRAM And R
|<2> Update Main Application File
|<3> Update Backup Application Fil
|<4> Update Secure Application File
|<5> Modify Ethernet Parameter
||<0> Exit To Main Menu
|<Ensure The Parameter Be Modified Before Downloading!>
|=================================================================
Enter your choice(0-5): 0
===============<EXTEND-BOOTWARE MENU>===========================
<1> Boot System
<2> Enter Serial SubMenu
<3> Enter Ethernet SubMenu
<4> File Control
<5> Restore to Factory Default Configuration
<6> Skip Current System Configuration
<7> BootWare Operation Menu
<8> Clear Super Password
<9> Storage Device Operation
<0>Reboot ==========================================================
Ctrl+C: Display Copyright
Ctrl+F: Format File System
Enter your choice(0-9): 4
=====================<File CONTROL>===============================
|Note:the operating device is flash
<1> Display All File(s)
<2> Set Application File type
<3> Delete File
<0> Exit To Main Menu
==============================================================
Enter your choice(0-3): 1
Display all file(s) in flash:
"M" = MAIN "B" = BACKUP "S" = SECURE "N/A" = NOT ASSIGNED
|NO. Size(B) Time Type Name
||1 9124864 Aug/08/2008 20:00:00 M wa2600a_fat.bin
==============================================================
6.
|Note:the operating device is flash
<1> Display All File(s)
<2> Set Application File type
<3> Delete File
<0> Exit To Main Menu
=================================================================
Enter your choice(0-3): 0
==================<EXTEND-BOOTWARE MENU>===========================
<1> Boot System
<2> Enter Serial SubMenu
<3> Enter Ethernet SubMenu
<4> File Control
<5> Restore to Factory Default Configuration
<6> Skip Current System Configuration
<7> BootWare Operation Menu
<8> Clear Super Password
<9> Storage Device Operation
<0>Reboot ==================================================================
Ctrl+C: Display Copyright
Ctrl+F: Format File System
Enter your choice(0-9): 0
System is starting...
7.
- 2021-04-18回答
- 评论(4)
- 举报
-
(0)
你好，请问更新要改名字吗？
有没有详细教程啊，谢谢
需要改名字的先生
AP瘦切胖配置方法 目录 AP瘦切胖配置案例................................................................................................................................ 1 1.1 适用产品系列........................................................................................................................... 1 1.1.1 AP瘦切胖配置案例（命令行）....................................................................................... 1 1.1.2 AP瘦切胖配置案例（Bootrom）..................................................................................... 3 1.1 适用产品系列 本手册适用于如下产品：WAP712C、WAP722E、WAP722S、WAP722、WAP621。其他型号的AP能否支持胖瘦切换，可在新华三官网的“产品支持与服务>文档中心”中确认。 1.1.1 AP瘦切胖配置案例（命令行） 操作风险提示：AP瘦切胖有风险，操作不当或者意外断电会导致设备故障，操作需谨慎。WAP722E和、WAP722没有Console口，建议使用Telnet方式登入命令行 命令行升级需在PC上搭建TFTP Server（推荐用户使用3CDaemon搭建TFTP服务器） 将软件版本下载到设备FLASH内，然后通过命令行加载Bootrom版本，再加载主机软件版本，加载时输入的文件名一定要一致，建议复制黏贴，然后升级过程中避免断电重启操作。 具体操作如下： 1. 从新华三的官网下载对应AP型号的胖版本，下载到电脑后，需修改文件名，以WAP621为例子，修改对应的启动文件名wa2600a_fat.bin，需要注意文件名称修改正确。 AP型号和使用版本关系： AP-mode 版本名称 H3C WAP621 wa2600a_fat.bin H3C WAP722 wa4300_fat.bin H3C WAP722E H3C WAP722S wa4300s_fat.bin H3C WAP712C 2. 电脑网卡设置为：192.168.0.1/255.255.255.0 ，如下例子打开TFTP服务器，把软件版本WA2600a_fat.bin放到电脑桌面上，TFTP服务器目录指向电脑桌面，然后点击确定 3. 创建AP的ip地址，AP设置地址为192.168.0.2 255.255.255.0，和电脑同一个网段，保证电脑和AP网络可达。以下标黑部分为设备自动打印部分，标红加粗的命令是需要手动输入。 <H3C> system [H3C] interface vlan1 [H3C-Vlan-interface1] ip address 192.168.0.2 255.255.255.0 [H3C-Vlan-interface1] quit 4. 通过TFTP上传胖AP：wa2620a_fat.bin，192.168.0.1是电脑的ip， <H3C> tftp 192.168.0.1 get wa2600a_fat.bin File will be transferred in binary mode. Downloading file from remote tftp server, please wait........................................................................................................................ TFTP: 4602950 bytes received in 115 second(s). File downloaded successfully. 备注：如果提示FLASH空间不足已放下新版本请将老版本删除，删除后请勿重启，否则设备已无系统，只能通过bootrom升级。 <H3C>delete /unreserved wa2600a_fit.bin //如果空间不够，可以删除原有的软件版本释放存储空间 <H3C> tftp 192.168.0.1 get wa2600a_fat.bin 5. 加载BOOTROM <H3C> bootrom update file wa2600a_fat.btm（此步忽略） please wait ... Bootrom is updated! 6. 加载主机软件 <H3C> boot-loader file wa2600a_fat.bin main <H3C> reboot 7. 重启设备完成后就可以使用默认的管理地址192.168.0.50登录AP进行管理了。登录AP的默认用户名是admin，密码是h3capadmin。 1.1.2 AP瘦切胖配置案例（Bootrom） 1. 使用Console口登入到命令行，从官网下载WAP621的软件版本，将压缩包解压，将里面的文件名称修改为wa2600a_fat.bin 2. 电脑网卡设置为：192.168.0.1 255.255.255.0，如下例子打开TFTP服务器，把软件版本WA2600a_fat.bin放到电脑桌面上，TFTP服务器目录指向电脑桌面，然后点击确定 3. 在AP重启的时候按住Ctrl+B进入设备的bootroom菜单，以下标黑部分为设备自动打印部分，标红加粗的命令是需要手动输入。 ===============<EXTEND-BOOTWARE MENU>========================= |<1> Boot System |<2> Enter Serial SubMenu |<3> Enter Ethernet SubMenu |<4> File Control |<5> Restore to Factory Default Configuration |<6> Skip Current System Configuration |<7> BootWare Operation Menu |<8> Clear Super Password |<9> Storage Device Operation |<0> Reboot =============================================================== Ctrl+C: Display Copyright Ctrl+F: Format File System Enter your choice(0-9): Ctrl+F y Enter your choice(0-9): 3（此处输入） ================<Enter Ethernet SubMenu>========================== |Note:the operating device is flash |<1> Download Application Program To SDRAM And Run |<2> Update Main Application File |<3> Update Backup Application File |<4> Update Secure Application File |<5> Modify Ethernet Parameter |<0> Exit To Main Menu |<Ensure The Parameter Be Modified Before Downloading!> ============================================================= 4. 进入修改以太网参数菜单，使用TFTP网络协议传输wa2600a_fat.bin到AP上 Enter your choice(0-5): 5 ===========<ETHERNET PARAMETER SET>===================== |Note: '.' = Clear field. | '-' = Go to previous field. | Ctrl+D = Quit. =============================================================== Protocol (FTP or TFTP) : TFTP //忽略输出内容，直接输入TFTP，然后回车 Load File Name :wa2600a_fat.bin //忽略输出内容，直接输入wa2600a_fat.bin，然后回车 Target File Name :wa2600a_fat.bin //忽略输出内容，直接输入wa2600a_fat.bin，然后回车 Server IP Address :192.168.0.1 //忽略输出内容，直接输入电脑主机的 IP，比如192.168.0.1，然后回车 Local IP Address :192.168.0.50 //忽略输出内容，直接输入和电脑主机的ip同一网段，比如192.168.0.50，然后回车 Gateway IP Address :0.0.0.0 //忽略输出内容，直接回车 备注：注意给电脑手动配置一个与AP同网段的IP地址，保证电脑与AP路由可达 =============<Enter Ethernet SubMenu>========================== |Note:the operating device is flash |<1> Download Application Program To SDRAM And |<2> Update Main Application File |<3> Update Backup Application File |<4> Update Secure Application File |<5> Modify Ethernet Parameter |<0> Exit To Main Menu |<Ensure The Parameter Be Modified Before Downloading!> ============================================================= Enter your choice(0-5): 2 //此时可以看到TFTP服务器上数据上传的滚动 Loading..................................................................... ....................................Done! 5. 返回主菜单，查看设备上是否真的已经上传了该软件版本 =================<Enter Ethernet SubMenu>========================== |Note:the operating device is flash |<1> Download Application Program To SDRAM And R |<2> Update Main Application File |<3> Update Backup Application Fil |<4> Update Secure Application File |<5> Modify Ethernet Parameter ||<0> Exit To Main Menu |<Ensure The Parameter Be Modified Before Downloading!> |================================================================= Enter your choice(0-5): 0 ===============<EXTEND-BOOTWARE MENU>=========================== <1> Boot System <2> Enter Serial SubMenu <3> Enter Ethernet SubMenu <4> File Control <5> Restore to Factory Default Configuration <6> Skip Current System Configuration <7> BootWare Operation Menu <8> Clear Super Password <9> Storage Device Operation <0>Reboot ========================================================== Ctrl+C: Display Copyright Ctrl+F: Format File System Enter your choice(0-9): 4 =====================<File CONTROL>=============================== |Note:the operating device is flash <1> Display All File(s) <2> Set Application File type <3> Delete File <0> Exit To Main Menu ============================================================== Enter your choice(0-3): 1 Display all file(s) in flash: 'M' = MAIN 'B' = BACKUP 'S' = SECURE 'N/A' = NOT ASSIGNED |NO. Size(B) Time Type Name ||1 9124864 Aug/08/2008 20:00:00 M wa2600a_fat.bin ============================================================== 6. 返回主菜单，将设备进行重启 |Note:the operating device is flash <1> Display All File(s) <2> Set Application File type <3> Delete File <0> Exit To Main Menu ================================================================= Enter your choice(0-3): 0 ==================<EXTEND-BOOTWARE MENU>=========================== <1> Boot System <2> Enter Serial SubMenu <3> Enter Ethernet SubMenu <4> File Control <5> Restore to Factory Default Configuration <6> Skip Current System Configuration <7> BootWare Operation Menu <8> Clear Super Password <9> Storage Device Operation <0>Reboot ================================================================== Ctrl+C: Display Copyright Ctrl+F: Format File System Enter your choice(0-9): 0 System is starting... 7. 重启设备完成后就可以使用默认的管理地址192.168.0.50登录AP进行管理了。登录AP的默认用户名是admin，密码是h3capadmin。
亲~登录后才可以操作哦!
确定你的邮箱还未认证，请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
- 1. 您举报的内容是什么？（请在邮件中列出您举报的内容和链接地址）
- 2. 您是谁？（身份证明材料，可以是身份证或护照等证件）
- 3. 是哪家企业？（营业执照，单位登记证明等证件）
- 4. 您与该企业的关系是？（您是企业法人或被授权人，需提供企业委托授权书）
抄袭了我的内容
×
原文链接或出处
诽谤我
×
- 1. 您举报的内容以及侵犯了您什么权益？（请在邮件中列出您举报的内容、链接地址，并给出简短的说明）
- 2. 您是谁？（身份证明材料，可以是身份证或护照等证件）
对根叔社区有害的内容
×
不规范转载
×
举报说明
AP瘦切胖配置方法 目录 AP瘦切胖配置案例................................................................................................................................ 1 1.1 适用产品系列........................................................................................................................... 1 1.1.1 AP瘦切胖配置案例（命令行）....................................................................................... 1 1.1.2 AP瘦切胖配置案例（Bootrom）..................................................................................... 3 1.1 适用产品系列 本手册适用于如下产品：WAP712C、WAP722E、WAP722S、WAP722、WAP621。其他型号的AP能否支持胖瘦切换，可在新华三官网的“产品支持与服务>文档中心”中确认。 1.1.1 AP瘦切胖配置案例（命令行） 操作风险提示：AP瘦切胖有风险，操作不当或者意外断电会导致设备故障，操作需谨慎。WAP722E和、WAP722没有Console口，建议使用Telnet方式登入命令行 命令行升级需在PC上搭建TFTP Server（推荐用户使用3CDaemon搭建TFTP服务器） 将软件版本下载到设备FLASH内，然后通过命令行加载Bootrom版本，再加载主机软件版本，加载时输入的文件名一定要一致，建议复制黏贴，然后升级过程中避免断电重启操作。 具体操作如下： 1. 从新华三的官网下载对应AP型号的胖版本，下载到电脑后，需修改文件名，以WAP621为例子，修改对应的启动文件名wa2600a_fat.bin，需要注意文件名称修改正确。 AP型号和使用版本关系： AP-mode 版本名称 H3C WAP621 wa2600a_fat.bin H3C WAP722 wa4300_fat.bin H3C WAP722E H3C WAP722S wa4300s_fat.bin H3C WAP712C 2. 电脑网卡设置为：192.168.0.1/255.255.255.0 ，如下例子打开TFTP服务器，把软件版本WA2600a_fat.bin放到电脑桌面上，TFTP服务器目录指向电脑桌面，然后点击确定 3. 创建AP的ip地址，AP设置地址为192.168.0.2 255.255.255.0，和电脑同一个网段，保证电脑和AP网络可达。以下标黑部分为设备自动打印部分，标红加粗的命令是需要手动输入。 <H3C> system [H3C] interface vlan1 [H3C-Vlan-interface1] ip address 192.168.0.2 255.255.255.0 [H3C-Vlan-interface1] quit 4. 通过TFTP上传胖AP：wa2620a_fat.bin，192.168.0.1是电脑的ip， <H3C> tftp 192.168.0.1 get wa2600a_fat.bin File will be transferred in binary mode. Downloading file from remote tftp server, please wait........................................................................................................................ TFTP: 4602950 bytes received in 115 second(s). File downloaded successfully. 备注：如果提示FLASH空间不足已放下新版本请将老版本删除，删除后请勿重启，否则设备已无系统，只能通过bootrom升级。 <H3C>delete /unreserved wa2600a_fit.bin //如果空间不够，可以删除原有的软件版本释放存储空间 <H3C> tftp 192.168.0.1 get wa2600a_fat.bin 5. 加载BOOTROM <H3C> bootrom update file wa2600a_fat.btm（此步忽略） please wait ... Bootrom is updated! 6. 加载主机软件 <H3C> boot-loader file wa2600a_fat.bin main <H3C> reboot 7. 重启设备完成后就可以使用默认的管理地址192.168.0.50登录AP进行管理了。登录AP的默认用户名是admin，密码是h3capadmin。 1.1.2 AP瘦切胖配置案例（Bootrom） 1. 使用Console口登入到命令行，从官网下载WAP621的软件版本，将压缩包解压，将里面的文件名称修改为wa2600a_fat.bin 2. 电脑网卡设置为：192.168.0.1 255.255.255.0，如下例子打开TFTP服务器，把软件版本WA2600a_fat.bin放到电脑桌面上，TFTP服务器目录指向电脑桌面，然后点击确定 3. 在AP重启的时候按住Ctrl+B进入设备的bootroom菜单，以下标黑部分为设备自动打印部分，标红加粗的命令是需要手动输入。 ===============<EXTEND-BOOTWARE MENU>========================= |<1> Boot System |<2> Enter Serial SubMenu |<3> Enter Ethernet SubMenu |<4> File Control |<5> Restore to Factory Default Configuration |<6> Skip Current System Configuration |<7> BootWare Operation Menu |<8> Clear Super Password |<9> Storage Device Operation |<0> Reboot =============================================================== Ctrl+C: Display Copyright Ctrl+F: Format File System Enter your choice(0-9): Ctrl+F y Enter your choice(0-9): 3（此处输入） ================<Enter Ethernet SubMenu>========================== |Note:the operating device is flash |<1> Download Application Program To SDRAM And Run |<2> Update Main Application File |<3> Update Backup Application File |<4> Update Secure Application File |<5> Modify Ethernet Parameter |<0> Exit To Main Menu |<Ensure The Parameter Be Modified Before Downloading!> ============================================================= 4. 进入修改以太网参数菜单，使用TFTP网络协议传输wa2600a_fat.bin到AP上 Enter your choice(0-5): 5 ===========<ETHERNET PARAMETER SET>===================== |Note: '.' = Clear field. | '-' = Go to previous field. | Ctrl+D = Quit. =============================================================== Protocol (FTP or TFTP) : TFTP //忽略输出内容，直接输入TFTP，然后回车 Load File Name :wa2600a_fat.bin //忽略输出内容，直接输入wa2600a_fat.bin，然后回车 Target File Name :wa2600a_fat.bin //忽略输出内容，直接输入wa2600a_fat.bin，然后回车 Server IP Address :192.168.0.1 //忽略输出内容，直接输入电脑主机的 IP，比如192.168.0.1，然后回车 Local IP Address :192.168.0.50 //忽略输出内容，直接输入和电脑主机的ip同一网段，比如192.168.0.50，然后回车 Gateway IP Address :0.0.0.0 //忽略输出内容，直接回车 备注：注意给电脑手动配置一个与AP同网段的IP地址，保证电脑与AP路由可达 =============<Enter Ethernet SubMenu>========================== |Note:the operating device is flash |<1> Download Application Program To SDRAM And |<2> Update Main Application File |<3> Update Backup Application File |<4> Update Secure Application File |<5> Modify Ethernet Parameter |<0> Exit To Main Menu |<Ensure The Parameter Be Modified Before Downloading!> ============================================================= Enter your choice(0-5): 2 //此时可以看到TFTP服务器上数据上传的滚动 Loading..................................................................... ....................................Done! 5. 返回主菜单，查看设备上是否真的已经上传了该软件版本 =================<Enter Ethernet SubMenu>========================== |Note:the operating device is flash |<1> Download Application Program To SDRAM And R |<2> Update Main Application File |<3> Update Backup Application Fil |<4> Update Secure Application File |<5> Modify Ethernet Parameter ||<0> Exit To Main Menu |<Ensure The Parameter Be Modified Before Downloading!> |================================================================= Enter your choice(0-5): 0 ===============<EXTEND-BOOTWARE MENU>=========================== <1> Boot System <2> Enter Serial SubMenu <3> Enter Ethernet SubMenu <4> File Control <5> Restore to Factory Default Configuration <6> Skip Current System Configuration <7> BootWare Operation Menu <8> Clear Super Password <9> Storage Device Operation <0>Reboot ========================================================== Ctrl+C: Display Copyright Ctrl+F: Format File System Enter your choice(0-9): 4 =====================<File CONTROL>=============================== |Note:the operating device is flash <1> Display All File(s) <2> Set Application File type <3> Delete File <0> Exit To Main Menu ============================================================== Enter your choice(0-3): 1 Display all file(s) in flash: 'M' = MAIN 'B' = BACKUP 'S' = SECURE 'N/A' = NOT ASSIGNED |NO. Size(B) Time Type Name ||1 9124864 Aug/08/2008 20:00:00 M wa2600a_fat.bin ============================================================== 6. 返回主菜单，将设备进行重启 |Note:the operating device is flash <1> Display All File(s) <2> Set Application File type <3> Delete File <0> Exit To Main Menu ================================================================= Enter your choice(0-3): 0 ==================<EXTEND-BOOTWARE MENU>=========================== <1> Boot System <2> Enter Serial SubMenu <3> Enter Ethernet SubMenu <4> File Control <5> Restore to Factory Default Configuration <6> Skip Current System Configuration <7> BootWare Operation Menu <8> Clear Super Password <9> Storage Device Operation <0>Reboot ================================================================== Ctrl+C: Display Copyright Ctrl+F: Format File System Enter your choice(0-9): 0 System is starting... 7. 重启设备完成后就可以使用默认的管理地址192.168.0.50登录AP进行管理了。登录AP的默认用户名是admin，密码是h3capadmin。