路由器启动不了？
- 1关注
- 1收藏，1652浏览
最佳答案
软件版本丢失了，需要重新导入版本，方法如下：
2、 Bootrom菜单下升级
2、1 TFTP方式升级
1)在PC上搭建TFTP Sever服务器
注意：一定要选择正确的路径,目录不要太深,不要有中文或特殊字符,否则可能识别不了。
2)使用CRT软件以console口（pc的串口连接到设备的console口）登录到设备，配置串口的相关参数：
重启设备
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU...
Do you want to check SDRAM? [Y/N]
Booting Normal Extended BootWare
The Extended BootWare is self-decompressing....Done.
****************************************************************************
* *
* H3C MSR26-30 BootWare, Version 1.43 *
* *
****************************************************************************
Copyright (c) 2004-2014 Hangzhou H3C Technologies Co., Ltd.
Compiled Date : Jun 17 2014
CPU ID : 0x1
Memory Type : DDR3 SDRAM
Memory Size : 1024MB
Flash Size : 2MB
Nand Flash size : 256MB
CPLD Version : 2.0
PCB Version : 3.0
BootWare Validating...
Press Ctrl+B to access EXTENDED-BOOTWARE MENU...
3）必须在出现“Press Ctrl-B to enter Boot Menu...”的2秒钟之内，键入<Ctrl+B>，才能进入BOOT菜单，否则系统将进入程序解压过程；若程序进入解压过程后再希望进入BOOT菜单，则需要重新启动设备。
Password recovery capability is enabled.
Note: The current operating device is flash
Enter < Storage Device Operation > to select device.
==========================<EXTENDED-BOOTWARE MENU>==========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Skip Authentication for Console Login |
|<9> Storage Device Operation |
|<0> Reboot |
=====================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format File System
Enter your choice(0-9): 3
4) 进入BOOT菜单后，键入“3”后回车,进入以太网子菜单。
==========================<Enter Ethernet SubMenu>==========================
|Note:the operating device is flash |
|<1> Download Image Program To SDRAM And Run |
|<2> Update Main Image File |
|<3> Update Backup Image File |
|<4> Download Files(*.*) |
|<5> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|<Ensure The Parameter Be Modified Before Downloading!> |
=============================================================
Enter your choice(0-5): 5
5) 键入“5”后回车，选择TFTP方式参数设置
==========================<ETHERNET PARAMETER SET>==========================
|Note: '.' = Clear field. |
| '-' = Go to previous field. |
| Ctrl+D = Quit. |
================================================================
Protocol (FTP or TFTP) :tftp tftp
Load File Name :MSR26-CMW710-R0106P08.IPE
: MSR26-CMW710-R0106P11.IPE
Target File Name :main.ipe
:boot-tftp.ipe
Server IP Address :192.168.10.1 192.168.1.2
Local IP Address :192.168.10.2 192.168.1.1
Subnet Mask :255.255.255.0 255.255.255.0
Gateway IP Address :0.0.0.0
6）输入升级的文件名（含后缀），输入服务器地址，本地地址和网关。
==========================<Enter Ethernet SubMenu>==========================
|Note:the operating device is flash |
|<1> Download Image Program To SDRAM And Run |
|<2> Update Main Image File |
|<3> Update Backup Image File |
|<4> Download Files(*.*) |
|<5> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|<Ensure The Parameter Be Modified Before Downloading!> |
======================================================================
Enter your choice(0-5): 2
7
Loading..................................................................... ............................................................................ .....................................................Done.
60637184 bytes downloaded!
Image file msr26-cmw710-boot-r0106p11.bin is self-decompressing...
Saving file flash:/msr26-cmw710-boot-r0106p11.bin .......................
Done.
Image file msr26-cmw710-system-r0106p11.bin is self-decompressing...
Saving file flash:/msr26-cmw710-system-r0106p11.bin ........................
............................................................................
..........................................Done.
Image file msr26-cmw710-security-r0106p11.bin is self-decompressing...
Saving file flash:/msr26-cmw710-security-r0106p11.bin ..Done.
Image file msr26-cmw710-voice-r0106p11.bin is self-decompressing...
Saving file flash:/msr26-cmw710-voice-r0106p11.bin .....Done.
Image file msr26-cmw710-data-r0106p11.bin is self-decompressing...
Saving file flash:/msr26-cmw710-data-r0106p11.bin .......Done.
==========================<Enter Ethernet SubMenu>==========================
|Note:the operating device is flash |
|<1> Download Image Program To SDRAM And Run |
|<2> Update Main Image File |
|<3> Update Backup Image File |
|<4> Download Files(*.*) |
|<5> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|<Ensure The Parameter Be Modified Before Downloading!> |
=============================================================
Enter your choice(0-5): 0
8
==========================<EXTENDED-BOOTWARE MENU>==========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Skip Authentication for Console Login |
|<9> Storage Device Operation |
|<0> Reboot |
======================================================================Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format File System
Enter your choice(0-9): 1
9
- 2021-06-12回答
- 评论(0)
- 举报
-
(0)
亲~登录后才可以操作哦!
确定你的邮箱还未认证，请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
- 1. 您举报的内容是什么？（请在邮件中列出您举报的内容和链接地址）
- 2. 您是谁？（身份证明材料，可以是身份证或护照等证件）
- 3. 是哪家企业？（营业执照，单位登记证明等证件）
- 4. 您与该企业的关系是？（您是企业法人或被授权人，需提供企业委托授权书）
抄袭了我的内容
×
原文链接或出处
诽谤我
×
- 1. 您举报的内容以及侵犯了您什么权益？（请在邮件中列出您举报的内容、链接地址，并给出简短的说明）
- 2. 您是谁？（身份证明材料，可以是身份证或护照等证件）
对根叔社区有害的内容
×
不规范转载
×
举报说明
暂无评论