10508引擎

您好，V5平台：slave switchover

V7平台reboot slot 0

1.1.85  system switchover

system switchover命令用来手工触发主用主控板和备用主控板的主备倒换。

【命令】

system switchover

【视图】

系统视图

【缺省用户角色】

network-admin

【使用指导】

仅独立运行模式下支持本命令。

仅缺省MDC支持本命令。

手工触发主备倒换时，原主用主控板会自动重启，所以，在执行本命令前，建议先保存当前配置。

【举例】

# 当前配置跟启动配置文件比较无变化时，手工触发主用主控板和备用主控板的主备倒换。

<Sysname> system-view

[Sysname] system switchover

Switching to the standby MPU. Continue? [Y/N]:y

Start to check configuration with next startup configuration file, please wait.........DONE!

This command will perform a switchover. Continue? [Y/N]:y

Now rebooting, please wait...

# 当前配置跟启动配置文件比较有变化时，手工触发主用主控板和备用主控板的主备倒换。

<Sysname> system-view

[Sysname] system switchover

Switching to the standby MPU. Continue? [Y/N]:y

Start to check configuration with next startup configuration file, please wait.........DONE!

Current configuration may be lost after the reboot, save current configuration?

[Y/N]:y

Please input the file name(*.cfg)[flash:/mqc.cfg]

(To leave the existing filename unchanged, press the enter key):

flash:/mqc.cfg exists, overwrite? [Y/N]:y

Validating file. Please wait...

Saved the current configuration to mainboard device successfully.

This command will perform a switchover. Continue? [Y/N]:y

Now rebooting, please wait...

重启主用主控，备用就顶上了