h3c wa2610i-gn怎么刷胖AP，麻烦详细一点，我是新手

1.先准备好刷机线



2.给AP配置一个地址（瘦AP一般没有配地址）。同时给电脑配置一个和AP同网段的地址。确保电脑能够ping通AP地址（保证电脑和AP处于同一网段）


3.下载tftpd32软件.把刷机文件放入tftpd32文件夹内


4.打开电脑上自带附件`通讯`超级终端(不会设置请百度)


以下是启动信息
******************************************************************************
* Copyright (c) 2004-2015 Hangzhou H3C Tech. Co., Ltd. All rights reserved.  *
* Without the owner's prior written consent,                                 *
* no decompiling or reverse-engineering shall be allowed.                    *
******************************************************************************

User interface con0 is available.



Please press ENTER.
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU
Booting Normal Extend BootWare....
The Extend BootWare is self-decompressing.........................Done!

****************************************************************************
*                                                                          *
*                 H3C WA2610E-GNP BootWare, Version 2.03                   *
*                                                                          *
****************************************************************************
Copyright (c) 2004-2013 Hangzhou H3C Technologies Co., Ltd.

Compiled Date       : Mar  5 2013
CPU Type            : AR9350   型号
CPU L1 Cache        : 32KB     还有L1缓存
CPU Clock Speed     : 560MHz    频率
Memory Type         : SDRAM
Memory Size         : 128MB     内存
BootWare Size       : 512KB
Flash Size          : 32MB     F闪存 
CPLD Version        : 002
PCB Version         : Ver.F


BootWare Validating...
Press Ctrl+B to enter extended boot menu...     启动时按Ctrl+B
BootWare password: Not required. Please press Enter to continue.

Password recovery capability is enabled.
Note: The current operating device is flash
Enter < Storage Device Operation > to select device.

===========================<EXTEND-BOOTWARE MENU>===========================
|<1> Boot System                                                           |
|<2> Enter Serial SubMenu                                                  |
|<3> Enter Ethernet SubMenu                                                |
|<4> File Control                                                          |
|<5> Restore to Factory Default Configuration                              |
|<6> Skip Current System Configuration                                     |
|<7> BootWare Operation Menu                                               |
|<8> Clear Super Password                                                  |
|<9> Storage Device Operation                                              |
|<0> Reboot                                                                |
============================================================================
Ctrl+C: Display Copyright
Ctrl+F: Format File System         按Ctrl+F删除原flash中文件
Enter your choice(0-9): 
Warning:All files on flash will be lost! Are you sure to format? [Y/N]Y.....          按Y 
............................................................................
............................................................................
............................................................................
..........................
Format success.

===========================<EXTEND-BOOTWARE MENU>===========================
|<1> Boot System                                                           |
|<2> Enter Serial SubMenu                                                  |
|<3> Enter Ethernet SubMenu                                                |
|<4> File Control                                                          |
|<5> Restore to Factory Default Configuration                              |
|<6> Skip Current System Configuration                                     |
|<7> BootWare Operation Menu                                               |
|<8> Clear Super Password                                                  |
|<9> Storage Device Operation                                              |
|<0> Reboot                                                                |
============================================================================
Ctrl+C: Display Copyright
Ctrl+F: Format File System
Enter your choice(0-9): 3         按3

==========================<Enter Ethernet SubMenu>==========================
|Note:the operating device is flash                                        |
|<1> Download Application Program To SDRAM And Run                         |
|<2> Update Main Application File                                          |
|<3> Update Backup Application File                                        |
|<4> Update Secure Application File                                        |
|<5> Modify Ethernet Parameter                                             |
|<0> Exit To Main Menu                                                     |
|<Ensure The Parameter Be Modified Before Downloading!>                    |
============================================================================
Enter your choice(0-5): 5      按5  

==========================<ETHERNET PARAMETER SET>==========================
|Note:       '.' = Clear field.                                            |
|            '-' = Go to previous field.                                   |
|          Ctrl+D = Quit.                                                  |
============================================================================
Protocol (FTP or TFTP) :TFTP       检查以下IP和文件名是否正确,如果不正确请
Load File Name         :wa2600test.bin .    更改.使用命令'.'或'-' 更改后回车
Load File Name         : wa2600a_fat.bin     
Target File Name       :wa2600test.bin .     文件名必须是wa2600a_fat.bin
Target File Name       : wa2600a_fat.bin
Server IP Address      :192.168.0.5     电脑IP地址
Local IP Address       :192.168.0.4      AP地址
Gateway IP Address     :0.0.0.0 


==========================<Enter Ethernet SubMenu>==========================
|Note:the operating device is flash                                        |
|<1> Download Application Program To SDRAM And Run                         |
|<2> Update Main Application File                                          |
|<3> Update Backup Application File                                        |
|<4> Update Secure Application File                                        |
|<5> Modify Ethernet Parameter                                             |
|<0> Exit To Main Menu                                                     |
|<Ensure The Parameter Be Modified Before Downloading!>                    |
============================================================================
Enter your choice(0-5): 2      按2  更新主应用程序文件
Loading.....................................................................
............................................................................
...................................Done!
9091072 bytes downloaded!
Updating File flash:/wa2600a_fat.bin........................................
............................................................................
........................Done!

==========================<Enter Ethernet SubMenu>==========================
|Note:the operating device is flash                                        |
|<1> Download Application Program To SDRAM And Run                         |
|<2> Update Main Application File                                          |
|<3> Update Backup Application File                                        |
|<4> Update Secure Application File                                        |
|<5> Modify Ethernet Parameter                                             |
|<0> Exit To Main Menu                                                     |
|<Ensure The Parameter Be Modified Before Downloading!>                    |
============================================================================
Enter your choice(0-5): 0     按0  退出主菜单

===========================<EXTEND-BOOTWARE MENU>===========================
|<1> Boot System                                                           |
|<2> Enter Serial SubMenu                                                  |
|<3> Enter Ethernet SubMenu                                                |
|<4> File Control                                                          |
|<5> Restore to Factory Default Configuration                              |
|<6> Skip Current System Configuration                                     |
|<7> BootWare Operation Menu                                               |
|<8> Clear Super Password                                                  |
|<9> Storage Device Operation                                              |
|<0> Reboot                                                                |
============================================================================
Ctrl+C: Display Copyright
Ctrl+F: Format File System
Enter your choice(0-9): 4      按4  文件控制

===============================<File CONTROL>===============================
|Note:the operating device is flash                                        |
|<1> Display All File(s)                                                   |
|<2> Set Application File type                                             |
|<3> Delete File                                                           |
|<0> Exit To Main Menu                                                     |
============================================================================
Enter your choice(0-3): 1     按1  检查有没有wa2600a_fat.bin文件

Display all file(s) in flash:
'M' = MAIN      'B' = BACKUP      'S' = SECURE      'N/A' = NOT ASSIGNED
============================================================================
|NO. Size(B)   Time                 Type   Name                            |
|1   9091072   Aug/08/2008 20:00:00 M      wa2600a_fat.bin                 |
============================================================================

===============================<File CONTROL>===============================
|Note:the operating device is flash                                        |
|<1> Display All File(s)                                                   |
|<2> Set Application File type                                             |
|<3> Delete File                                                           |
|<0> Exit To Main Menu                                                     |
============================================================================
Enter your choice(0-3): 0     按0

===========================<EXTEND-BOOTWARE MENU>===========================
|<1> Boot System                                                           |
|<2> Enter Serial SubMenu                                                  |
|<3> Enter Ethernet SubMenu                                                |
|<4> File Control                                                          |
|<5> Restore to Factory Default Configuration                              |
|<6> Skip Current System Configuration                                     |
|<7> BootWare Operation Menu                                               |
|<8> Clear Super Password                                                  |
|<9> Storage Device Operation                                              |
|<0> Reboot                                                                |
============================================================================
Ctrl+C: Display Copyright
Ctrl+F: Format File System
Enter your choice(0-9): 0    按0  重启
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU
Booting Normal Extend BootWare....
The Extend BootWare is self-decompressing.........................Done!

****************************************************************************
*                                                                          *
*                 H3C WA2610E-GNP BootWare, Version 2.03                   *
*                                                                          *
****************************************************************************
Copyright (c) 2004-2013 Hangzhou H3C Technologies Co., Ltd.

Compiled Date       : Mar  5 2013
CPU Type            : AR9350
CPU L1 Cache        : 32KB
CPU Clock Speed     : 560MHz
Memory Type         : SDRAM
Memory Size         : 128MB
BootWare Size       : 512KB
Flash Size          : 32MB
CPLD Version        : 002
PCB Version         : Ver.F

         以下正在安装不要动它,抽枝寂莫等会...
BootWare Validating...      
Press Ctrl+B to enter extended boot menu...
Starting to get the main application file--flash:/wa2600a_fat.bin!..........
............................................................................
....................................................
The main application file is self-decompressing.............................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
...........................................................................
Done!
Extend BootWare Version is not equal,updating? [Y/N]
Updating Extend BootWare............Done!
Basic BootWare Version is not equal,updating? [Y/N]
Updating Basic BootWare..............Done!
BootWare updated,System is rebooting now.
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU
Booting Normal Extend BootWare....
The Extend BootWare is self-decompressing.........................Done!

****************************************************************************
*                                                                          *
*                 H3C WA2610E-GNP BootWare, Version 3.03                   *
*                                                                          *
****************************************************************************
Copyright (c) 2004-2014 Hangzhou H3C Technologies Co., Ltd.

Compiled Date       : Sep  1 2014
CPU Type            : AR9350
CPU L1 Cache        : 32KB
CPU Clock Speed     : 560MHz
Memory Type         : SDRAM
Memory Size         : 128MB
Memory Speed        : 480MHz
BootWare Size       : 512KB
Flash Size          : 32MB
CPLD Version        : 002
PCB Version         : Ver.F


Check net params crc error, use the default value
BootWare Validating...
Normal Extend BootWare Version is newer than Backup Extend BootWare!
Begin to Update the Backup Extend BootWare...............Done!
Press Ctrl+B to enter extended boot menu...
Starting to get the main application file--flash:/wa2600a_fat.bin!..........
............................................................................
....................................................
The main application file is self-decompressing.............................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
...........................................................................
Done!
System application is starting...
Startup configuration file does not exist.
User interface con0 is available.


                启动成功了,可以进入WEB管理
              用户名:admin  密码:h3capadmin
Press ENTER to get started.
<WA2610E-GNP>
#Nov 16 13:35:09:730 2011 WA2610E-GNP SHELL/4/LOGIN: 
Trap 1.3.6.1.4.1.2011.10.2.2.1.1.3.0.1<h3cLogIn>: login from Console
%Nov 16 13:35:09:730 2011 WA2610E-GNP SHELL/5/SHELL_LOGIN: Console logged in from con0.
<WA2610E-GNP>sys 
System View: return to User View with Ctrl+Z.
[WA2610E-GNP] 
[WA2610E-GNP]sys
             ^
% Ambiguous command found at '^' position.
[WA2610E-GNP]  
[WA2610E-GNP]
#Nov 16 13:37:02:403 2011 WA2610E-GNP SHELL/4/LOGIN: 
Trap 1.3.6.1.4.1.2011.10.2.2.1.1.3.0.1<h3cLogIn>:admin login from Web