v7 版本路由器pppoe获取ipv6,查看ipv6网关的命令是什么，有知道的大神分享一下，感谢

dis ip int dia0,dialer0是指你的拨号接口号，不一定是0

[MSR3600-GigabitEthernet0/0] dis ipv6 int dia0
Dialer0 current state: UP
Line protocol current state: UP
IPv6 is enabled, link-local address is FE80::50DA:47:7ACC:4407
Global unicast address(es):
240E:368:xxx:xx:xx:xxx:7ACC:4407, subnet is 240E:368:xx:xx::/64 [AUTOCFG]
[valid lifetime 259138s/preferred lifetime 172738s]
Joined group address(es):
FF02::1
FF02::2
FF02::1:FFCC:4407
MTU is 1480 bytes
ND DAD is enabled, number of DAD attempts: 1
ND reachable time is 30000 milliseconds
ND retransmit interval is 1000 milliseconds
Hosts use stateless autoconfig for addresses
IPv6 Packet statistics:
InReceives: 371712431
InTooShorts: 0
InTruncatedPkts: 0
InHopLimitExceeds: 242
InBadHeaders: 0
InBadOptions: 0
ReasmReqds: 3
ReasmOKs: 1
InFragDrops: 0
InFragTimeouts: 1
OutFragFails: 0
InUnknownProtos: 0
InDelivers: 342558
OutRequests: 351137
OutForwDatagrams: 695886563
InNoRoutes: 0
InTooBigErrors: 45789
OutFragOKs: 0
OutFragCreates: 0
InMcastPkts: 1772
InMcastNotMembers: 0
OutMcastPkts: 174
InAddrErrors: 0
InDiscards: 0
OutDiscards: 0