• 全部
  • 经验案例
  • 典型配置
  • 技术公告
  • FAQ
  • 漏洞说明
  • 全部
  • 是
  • 否
  • 全部
  • 是
  • 否
  • 大数据引擎
  • 知了引擎
产品线
搜索
取消
案例类型
发布者
是否解决
是否官方
时间
搜索引擎
匹配模式
高级搜索
问

S5560X_30C_EI堆叠告警

2022-12-01提问
  • 0关注
  • 0收藏，629浏览
zhiliao_Fm3XDW
zhiliao_Fm3XDW 零段
粉丝：0人 关注：0人

问题描述：

请问下面的这些日志，设备出了什么问题，如有出了故障是什么原因？

H3C DEV/5/FAN_RECOVERED: Fan 2 recovered. 

 %Oct 23 18:04:08:112 2022 H3C STM/3/STM_LINK_DOWN: IRF port 2 went down. 

 %Oct 23 18:04:08:173 2022 H3C HA/5/HA_STANDBY_TO_MASTER: Standby board in slot 2 changed to master. 

 %Oct 23 18:04:08:769 2022 H3C DEV/2/BOARD_STATE_FAULT: Board state changed to Fault on slot 1, type is MAIN_BOARD_TYPE_S5560X_30C_EI. 

 %Oct 23 18:04:09:193 2022 H3C LAGG/6/LAGG_INACTIVE_PHYSTATE: Member port GE1/0/15 of aggregation group BAGG1 changed to the inactive state, because the physical state of the port is down. 

 %Oct 23 18:04:09:194 2022 H3C LAGG/6/LAGG_INACTIVE_PHYSTATE: Member port GE1/0/16 of aggregation group BAGG1 changed to the inactive state, because the physical state of the port is down. 

 %Oct 23 18:04:09:259 2022 H3C LAGG/6/LAGG_INACTIVE_PHYSTATE: Member port GE1/0/17 of aggregation group BAGG2 changed to the inactive state, because the physical state of the port is down. 

 %Oct 23 18:04:09:334 2022 H3C LAGG/6/LAGG_INACTIVE_PHYSTATE: Member port GE1/0/18 of aggregation group BAGG3 changed to the inactive state, because the physical state of the port is down. 

 %Oct 23 18:04:09:414 2022 H3C LAGG/6/LAGG_INACTIVE_PHYSTATE: Member port GE1/0/19 of aggregation group BAGG4 changed to the inactive state, because the physical state of the port is down. 

 %Oct 23 18:04:09:492 2022 H3C LAGG/6/LAGG_INACTIVE_PHYSTATE: Member port GE1/0/20 of aggregation group BAGG5 changed to the inactive state, because the physical state of the port is down. 

 %Oct 23 18:04:10:508 2022 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface Vlan-interface10 changed to down. 

 %Oct 23 18:04:10:547 2022 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface Vlan-interface10 changed to down. 

 %Oct 23 18:05:10:416 2022 H3C BFD/4/BFD_MAD_INTERFACE_CHANGE_STATE: BFD MAD function enabled on Vlan-interface10 changed to the faulty state. 

 %Oct 23 18:05:28:784 2022 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface Ten-GigabitEthernet2/0/28 changed to up. 

 %Oct 23 18:05:28:786 2022 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface Ten-GigabitEthernet2/0/28 changed to up. 

 %Oct 23 18:05:29:267 2022 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface Ten-GigabitEthernet2/0/27 changed to up. 

 %Oct 23 18:05:29:269 2022 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface Ten-GigabitEthernet2/0/27 changed to up. 

 %Oct 23 18:05:33:356 2022 H3C STM/6/STM_LINK_UP: IRF port 2 came up. 

 %Oct 23 18:05:56:816 2022 H3C DEV/5/BOARD_STATE_NORMAL: Board state changed to Normal on slot 1, type is MAIN_BOARD_TYPE_S5560X_30C_EI. 

 %Oct 23 18:05:57:735 2022 H3C OPTMOD/4/MODULE_IN: -Slot=1; Ten-GigabitEthernet1/0/27: The transceiver is STACK_SFP_PLUS. 

 %Oct 23 18:05:57:759 2022 H3C OPTMOD/4/MODULE_IN: -Slot=1; Ten-GigabitEthernet1/0/28: The transceiver is STACK_SFP_PLUS. 

 %Oct 23 18:06:01:633 2022 H3C OPTMOD/4/MODULE_IN: -Slot=1; GigabitEthernet1/0/17: The transceiver is 1000_BASE_LX_SFP. 

 %Oct 23 18:06:01:892 2022 H3C OPTMOD/4/MODULE_IN: -Slot=1; GigabitEthernet1/0/18: The transceiver is 1000_BASE_LX_SFP. 

 %Oct 23 18:06:02:153 2022 H3C OPTMOD/4/MODULE_IN: -Slot=1; GigabitEthernet1/0/19: The transceiver is 1000_BASE_LX_SFP. 

 %Oct 23 18:06:02:410 2022 H3C OPTMOD/4/MODULE_IN: -Slot=1; GigabitEthernet1/0/20: The transceiver is 1000_BASE_LX_SFP. 

 %Oct 23 18:06:10:551 2022 H3C LLDP/5/LLDP_NEIGHBOR_AGE_OUT: Nearest bridge agent neighbor aged out on port GigabitEthernet2/0/14 (IfIndex 77), neighbor's chassis ID is 542b-de3f-3490, port ID is GigabitEthernet1/0/14. 

 %Oct 23 18:06:44:840 2022 H3C LLDP/6/LLDP_CREATE_NEIGHBOR: Nearest bridge agent neighbor created on port Ten-GigabitEthernet2/0/28 (IfIndex 91), neighbor's chassis ID is 542b-de3f-3490, port ID is Ten-GigabitEthernet1/0/27. 

 %Oct 23 18:06:44:863 2022 H3C LLDP/6/LLDP_CREATE_NEIGHBOR: Nearest bridge agent neighbor created on port Ten-GigabitEthernet2/0/27 (IfIndex 90), neighbor's chassis ID is 542b-de3f-3490, port ID is Ten-GigabitEthernet1/0/28. 

 %Oct 23 18:06:44:872 2022 H3C HA/5/HA_BATCHBACKUP_STARTED: Batch backup of standby board in slot 1 started. 

 %Oct 23 18:06:44:874 2022 H3C LLDP/6/LLDP_CREATE_NEIGHBOR: -Slot=1; Nearest bridge agent neighbor created on port Ten-GigabitEthernet1/0/27 (IfIndex 27), neighbor's chassis ID is 542b-de3f-3490, port ID is Ten-GigabitEthernet2/0/28. 

 %Oct 23 18:06:44:878 2022 H3C LLDP/6/LLDP_CREATE_NEIGHBOR: -Slot=1; Nearest bridge agent neighbor created on port Ten-GigabitEthernet1/0/28 (IfIndex 28), neighbor's chassis ID is 542b-de3f-3490, port ID is Ten-GigabitEthernet2/0/27. 

 %Oct 23 18:06:44:896 2022 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface Ten-GigabitEthernet1/0/27 changed to up. 

 %Oct 23 18:06:44:897 2022 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface Ten-GigabitEthernet1/0/27 changed to up. 

 %Oct 23 18:06:44:898 2022 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface Ten-GigabitEthernet1/0/28 changed to up. 

 %Oct 23 18:06:44:899 2022 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface Ten-GigabitEthernet1/0/28 changed to up. 

 %Oct 23 18:06:45:067 2022 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface GigabitEthernet1/0/20 changed to up. 

 %Oct 23 18:06:45:088 2022 H3C BFD/5/BFD_CHANGE_FSM: Sess[192.168.100.1/192.168.104.254, LD/RD:155/131, Interface:GE1/0/18, SessType:Ctrl, LinkType:INET], Ver:1, Sta: DOWN->UP, Diag: 0 (No Diagnostic) 

 %Oct 23 18:06:45:115 2022 H3C BFD/5/BFD_CHANGE_FSM: Sess[192.168.100.1/192.168.106.254, LD/RD:156/132, Interface:GE1/0/20, SessType:Ctrl, LinkType:INET], Ver:1, Sta: DOWN->UP, Diag: 0 (No Diagnostic) 

 %Oct 23 18:06:45:131 2022 H3C BFD/5/BFD_CHANGE_FSM: Sess[192.168.100.1/192.168.105.254, LD/RD:157/133, Interface:GE1/0/19, SessType:Ctrl, LinkType:INET], Ver:1, Sta: DOWN->UP, Diag: 0 (No Diagnostic) 

 %Oct 23 18:06:45:135 2022 H3C LAGG/6/LAGG_ACTIVE: Member port GE1/0/18 of aggregation group BAGG3 changed to the active state. %Oct 23 18:06:45:162 2022 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface GigabitEthernet1/0/19 changed to up. 

 %Oct 23 18:06:45:162 2022 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface GigabitEthernet1/0/18 changed to up. 

 %Oct 23 18:06:45:188 2022 H3C LLDP/6/LLDP_CREATE_NEIGHBOR: -Slot=1; Nearest bridge agent neighbor created on port GigabitEthernet1/0/20 (IfIndex 20), neighbor's chassis ID is 6893-2069-d29b, port ID is GigabitEthernet1/0/17. 

 %Oct 23 18:06:45:218 2022 H3C LAGG/6/LAGG_ACTIVE: Member port GE1/0/19 of aggregation group BAGG4 changed to the active state. 

 %Oct 23 18:06:45:234 2022 H3C LAGG/6/LAGG_ACTIVE: Member port GE1/0/20 of aggregation group BAGG5 changed to the active state. 

 %Oct 23 18:06:45:412 2022 H3C LLDP/6/LLDP_CREATE_NEIGHBOR: -Slot=1; Nearest bridge agent neighbor created on port GigabitEthernet1/0/19 (IfIndex 19), neighbor's chassis ID is 6893-2069-c75b, port ID is GigabitEthernet1/0/17. 

 %Oct 23 18:06:45:492 2022 H3C BFD/5/BFD_CHANGE_FSM: Sess[192.168.100.1/192.168.103.254, LD/RD:158/135, Interface:GE1/0/17, SessType:Ctrl, LinkType:INET], Ver:1, Sta: DOWN->UP, Diag: 0 (No Diagnostic) 

 %Oct 23 18:06:45:511 2022 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface GigabitEthernet1/0/17 changed to up. 

 %Oct 23 18:06:45:511 2022 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface GigabitEthernet1/0/18 changed to up. 

 %Oct 23 18:06:45:529 2022 H3C LAGG/6/LAGG_ACTIVE: Member port GE1/0/17 of aggregation group BAGG2 changed to the active state. 

 %Oct 23 18:06:45:534 2022 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface GigabitEthernet1/0/19 changed to up. 

 %Oct 23 18:06:45:535 2022 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface GigabitEthernet1/0/20 changed to up. 

 %Oct 23 18:06:45:594 2022 H3C LLDP/6/LLDP_CREATE_NEIGHBOR: -Slot=1; Nearest bridge agent neighbor created on port GigabitEthernet1/0/18 (IfIndex 18), neighbor's chassis ID is 9429-2f48-e7cb, port ID is Ten-GigabitEthernet1/0/28. 

 %Oct 23 18:06:45:671 2022 H3C LLDP/6/LLDP_CREATE_NEIGHBOR: -Slot=1; Nearest bridge agent neighbor created on port GigabitEthernet1/0/17 (IfIndex 17), neighbor's chassis ID is 9429-2f48-9fcb, port ID is Ten-GigabitEthernet1/0/28. 

 %Oct 23 18:06:45:726 2022 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface GigabitEthernet1/0/17 changed to up. 

 %Oct 23 18:06:45:875 2022 H3C HA/5/HA_BATCHBACKUP_FINISHED: Batch backup of standby board in slot 1 has finished. 

 %Oct 23 18:06:47:136 2022 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface GigabitEthernet1/0/3 changed to up. 

 %Oct 23 18:06:47:138 2022 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface GigabitEthernet1/0/3 changed to up. 

 %Oct 23 18:06:47:211 2022 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface GigabitEthernet1/0/1 changed to up. 

 %Oct 23 18:06:47:212 2022 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface GigabitEthernet1/0/1 changed to up. 

 %Oct 23 18:06:47:307 2022 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface GigabitEthernet2/0/14 changed to up. 

 %Oct 23 18:06:47:309 2022 H3C LAGG/6/LAGG_ACTIVE: Member port GE1/0/15 of aggregation group BAGG1 changed to the active state. %Oct 23 18:06:47:323 2022 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface GigabitEthernet2/0/14 changed to up. 

 %Oct 23 18:06:47:347 2022 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface Vlan-interface10 changed to up. 

 %Oct 23 18:06:47:349 2022 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface Vlan-interface10 changed to up. 

 %Oct 23 18:06:47:351 2022 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface GigabitEthernet1/0/15 changed to up. 

 %Oct 23 18:06:47:351 2022 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface GigabitEthernet1/0/14 changed to up. 

 %Oct 23 18:06:47:354 2022 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface GigabitEthernet1/0/14 changed to up. 

 %Oct 23 18:06:47:535 2022 H3C LLDP/6/LLDP_CREATE_NEIGHBOR: Nearest bridge agent neighbor created on port GigabitEthernet2/0/14 (IfIndex 77), neighbor's chassis ID is 542b-de3f-3490, port ID is GigabitEthernet1/0/14. 

 %Oct 23 18:06:47:539 2022 H3C LAGG/6/LAGG_ACTIVE: Member port GE1/0/16 of aggregation group BAGG1 changed to the active state. %Oct 23 18:06:47:596 2022 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface GigabitEthernet1/0/15 changed to up. 

 %Oct 23 18:06:47:598 2022 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface GigabitEthernet1/0/11 changed to up. 

 %Oct 23 18:06:47:599 2022 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface GigabitEthernet1/0/11 changed to up. 

 %Oct 23 18:06:47:600 2022 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface GigabitEthernet1/0/16 changed to up. 

 %Oct 23 18:06:47:675 2022 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface GigabitEthernet1/0/16 changed to up. 

 %Oct 23 18:06:48:559 2022 H3C LLDP/6/LLDP_CREATE_NEIGHBOR: -Slot=1; Nearest bridge agent neighbor created on port GigabitEthernet1/0/14 (IfIndex 14), neighbor's chassis ID is 542b-de3f-3490, port ID is GigabitEthernet2/0/14. 

 %Oct 23 18:07:10:394 2022 H3C BFD/5/BFD_MAD_INTERFACE_CHANGE_STATE: BFD MAD function enabled on Vlan-interface10 changed to the normal state. of the port is down. 

 %Oct 23 18:04:09:414 2022 H3C LAGG/6/LAGG_INACTIVE_PHYSTATE: Member port GE1/0/19 of aggregation group BAGG4 changed to the inactive state, because the physical state of the port is down. 

 %Oct 23 18:04:09:492 2022 H3C LAGG/6/LAGG_INACTIVE_PHYSTATE: Member port GE1/0/20 of aggregation group BAGG5 changed to the inactive state, because the physical state of the port is down. 

 %Oct 23 18:04:10:508 2022 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface Vlan-interface10 changed to down. 

 %Oct 23 18:04:10:547 2022 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface Vlan-interface10 changed to down. 

 %Oct 23 18:05:10:416 2022 H3C BFD/4/BFD_MAD_INTERFACE_CHANGE_STATE: BFD MAD function enabled on Vlan-interface10 changed to the faulty state. 

 %Oct 23 18:05:28:784 2022 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface Ten-GigabitEthernet2/0/28 changed to up. 

 %Oct 23 18:05:28:786 2022 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface Ten-GigabitEthernet2/0/28 changed to up. 

 %Oct 23 18:05:29:267 2022 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface Ten-GigabitEthernet2/0/27 changed to up. 

 %Oct 23 18:05:29:269 2022 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface Ten-GigabitEthernet2/0/27 changed to up. 

 %Oct 23 18:05:33:356 2022 H3C STM/6/STM_LINK_UP: IRF port 2 came up. 

 %Oct 23 18:05:56:816 2022 H3C DEV/5/BOARD_STATE_NORMAL: Board state changed to Normal on slot 1, type is MAIN_BOARD_TYPE_S5560X_30C_EI. 

 %Oct 23 18:05:57:735 2022 H3C OPTMOD/4/MODULE_IN: -Slot=1; Ten-GigabitEthernet1/0/27: The transceiver is STACK_SFP_PLUS. 

 %Oct 23 18:05:57:759 2022 H3C OPTMOD/4/MODULE_IN: -Slot=1; Ten-GigabitEthernet1/0/28: The transceiver is STACK_SFP_PLUS. 

 %Oct 23 18:06:01:633 2022 H3C OPTMOD/4/MODULE_IN: -Slot=1; GigabitEthernet1/0/17: The transceiver is 1000_BASE_LX_SFP. 

 %Oct 23 18:06:01:892 2022 H3C OPTMOD/4/MODULE_IN: -Slot=1; GigabitEthernet1/0/18: The transceiver is 1000_BASE_LX_SFP. 

 %Oct 23 18:06:02:153 2022 H3C OPTMOD/4/MODULE_IN: -Slot=1; GigabitEthernet1/0/19: The transceiver is 1000_BASE_LX_SFP. 

 %Oct 23 18:06:02:410 2022 H3C OPTMOD/4/MODULE_IN: -Slot=1; GigabitEthernet1/0/20: The transceiver is 1000_BASE_LX_SFP. 

 %Oct 23 18:06:10:551 2022 H3C LLDP/5/LLDP_NEIGHBOR_AGE_OUT: Nearest bridge agent neighbor aged out on port GigabitEthernet2/0/14 (IfIndex 77), neighbor's chassis ID is 542b-de3f-3490, port ID is GigabitEthernet1/0/14. 

 %Oct 23 18:06:44:840 2022 H3C LLDP/6/LLDP_CREATE_NEIGHBOR: Nearest bridge agent neighbor created on port Ten-GigabitEthernet2/0/28 (IfIndex 91), neighbor's chassis ID is 542b-de3f-3490, port ID is Ten-GigabitEthernet1/0/27. 

 %Oct 23 18:06:44:863 2022 H3C LLDP/6/LLDP_CREATE_NEIGHBOR: Nearest bridge agent neighbor created on port Ten-GigabitEthernet2/0/27 (IfIndex 90), neighbor's chassis ID is 542b-de3f-3490, port ID is Ten-GigabitEthernet1/0/28. 

 %Oct 23 18:06:44:872 2022 H3C HA/5/HA_BATCHBACKUP_STARTED: Batch backup of standby board in slot 1 started. 

 %Oct 23 18:06:44:874 2022 H3C LLDP/6/LLDP_CREATE_NEIGHBOR: -Slot=1; Nearest bridge agent neighbor created on port Ten-GigabitEthernet1/0/27 (IfIndex 27), neighbor's chassis ID is 542b-de3f-3490, port ID is Ten-GigabitEthernet2/0/28. 

 %Oct 23 18:06:44:878 2022 H3C LLDP/6/LLDP_CREATE_NEIGHBOR: -Slot=1; Nearest bridge agent neighbor created on port Ten-GigabitEthernet1/0/28 (IfIndex 28), neighbor's chassis ID is 542b-de3f-3490, port ID is Ten-GigabitEthernet2/0/27. 

 %Oct 23 18:06:44:896 2022 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface Ten-GigabitEthernet1/0/27 changed to up. 

 %Oct 23 18:06:44:897 2022 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface Ten-GigabitEthernet1/0/27 changed to up. 

 %Oct 23 18:06:44:898 2022 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface Ten-GigabitEthernet1/0/28 changed to up. 

 %Oct 23 18:06:44:899 2022 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface Ten-GigabitEthernet1/0/28 changed to up. 

 %Oct 23 18:06:45:067 2022 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface GigabitEthernet1/0/20 changed to up. 

 %Oct 23 18:06:45:088 2022 H3C BFD/5/BFD_CHANGE_FSM: Sess[192.168.100.1/192.168.104.254, LD/RD:155/131, Interface:GE1/0/18, SessType:Ctrl, LinkType:INET], Ver:1, Sta: DOWN->UP, Diag: 0 (No Diagnostic) 

 %Oct 23 18:06:45:115 2022 H3C BFD/5/BFD_CHANGE_FSM: Sess[192.168.100.1/192.168.106.254, LD/RD:156/132, Interface:GE1/0/20, SessType:Ctrl, LinkType:INET], Ver:1, Sta: DOWN->UP, Diag: 0 (No Diagnostic) 

 %Oct 23 18:06:45:131 2022 H3C BFD/5/BFD_CHANGE_FSM: Sess[192.168.100.1/192.168.105.254, LD/RD:157/133, Interface:GE1/0/19, SessType:Ctrl, LinkType:INET], Ver:1, Sta: DOWN->UP, Diag: 0 (No Diagnostic) 

 %Oct 23 18:06:45:135 2022 H3C LAGG/6/LAGG_ACTIVE: Member port GE1/0/18 of aggregation group BAGG3 changed to the active state. %Oct 23 18:06:45:162 2022 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface GigabitEthernet1/0/19 changed to up. 

 %Oct 23 18:06:45:162 2022 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface GigabitEthernet1/0/18 changed to up. 

 %Oct 23 18:06:45:188 2022 H3C LLDP/6/LLDP_CREATE_NEIGHBOR: -Slot=1; Nearest bridge agent neighbor created on port GigabitEthernet1/0/20 (IfIndex 20), neighbor's chassis ID is 6893-2069-d29b, port ID is GigabitEthernet1/0/17. 

 %Oct 23 18:06:45:218 2022 H3C LAGG/6/LAGG_ACTIVE: Member port GE1/0/19 of aggregation group BAGG4 changed to the active state. %Oct 23 18:06:45:234 2022 H3C LAGG/6/LAGG_ACTIVE: Member port GE1/0/20 of aggregation group BAGG5 changed to the active state. %Oct 23 18:06:45:412 2022 H3C LLDP/6/LLDP_CREATE_NEIGHBOR: -Slot=1; Nearest bridge agent neighbor created on port GigabitEthernet1/0/19 (IfIndex 19), neighbor's chassis ID is 6893-2069-c75b, port ID is GigabitEthernet1/0/17. 

 %Oct 23 18:06:45:492 2022 H3C BFD/5/BFD_CHANGE_FSM: Sess[192.168.100.1/192.168.103.254, LD/RD:158/135, Interface:GE1/0/17, SessType:Ctrl, LinkType:INET], Ver:1, Sta: DOWN->UP, Diag: 0 (No Diagnostic) 

 %Oct 23 18:06:45:511 2022 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface GigabitEthernet1/0/17 changed to up. 

 %Oct 23 18:06:45:511 2022 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface GigabitEthernet1/0/18 changed to up. 

 %Oct 23 18:06:45:529 2022 H3C LAGG/6/LAGG_ACTIVE: Member port GE1/0/17 of aggregation group BAGG2 changed to the active state. %Oct 23 18:06:45:534 2022 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface GigabitEthernet1/0/19 changed to up. 

 %Oct 23 18:06:45:535 2022 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface GigabitEthernet1/0/20 changed to up. 

 %Oct 23 18:06:45:594 2022 H3C LLDP/6/LLDP_CREATE_NEIGHBOR: -Slot=1; Nearest bridge agent neighbor created on port GigabitEthernet1/0/18 (IfIndex 18), neighbor's chassis ID is 9429-2f48-e7cb, port ID is Ten-GigabitEthernet1/0/28. 

 %Oct 23 18:06:45:671 2022 H3C LLDP/6/LLDP_CREATE_NEIGHBOR: -Slot=1; Nearest bridge agent neighbor created on port GigabitEthernet1/0/17 (IfIndex 17), neighbor's chassis ID is 9429-2f48-9fcb, port ID is Ten-GigabitEthernet1/0/28. 

 %Oct 23 18:06:45:726 2022 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface GigabitEthernet1/0/17 changed to up. 

 %Oct 23 18:06:45:875 2022 H3C HA/5/HA_BATCHBACKUP_FINISHED: Batch backup of standby board in slot 1 has finished. %Oct 23 18:06:47:136 2022 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface GigabitEthernet1/0/3 changed to up. 

 %Oct 23 18:06:47:138 2022 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface GigabitEthernet1/0/3 changed to up. 

 %Oct 23 18:06:47:211 2022 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface GigabitEthernet1/0/1 changed to up. 

 %Oct 23 18:06:47:212 2022 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface GigabitEthernet1/0/1 changed to up. 

 %Oct 23 18:06:47:307 2022 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface GigabitEthernet2/0/14 changed to up. 

 %Oct 23 18:06:47:309 2022 H3C LAGG/6/LAGG_ACTIVE: Member port GE1/0/15 of aggregation group BAGG1 changed to the active state. %Oct 23 18:06:47:323 2022 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface GigabitEthernet2/0/14 changed to up. 

 %Oct 23 18:06:47:347 2022 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface Vlan-interface10 changed to up. 

 %Oct 23 18:06:47:349 2022 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface Vlan-interface10 changed to up. 

 %Oct 23 18:06:47:351 2022 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface GigabitEthernet1/0/15 changed to up. 

 %Oct 23 18:06:47:351 2022 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface GigabitEthernet1/0/14 changed to up. 

 %Oct 23 18:06:47:354 2022 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface GigabitEthernet1/0/14 changed to up. 

 %Oct 23 18:06:47:535 2022 H3C LLDP/6/LLDP_CREATE_NEIGHBOR: Nearest bridge agent neighbor created on port GigabitEthernet2/0/14 (IfIndex 77), neighbor's chassis ID is 542b-de3f-3490, port ID is GigabitEthernet1/0/14. 

 %Oct 23 18:06:47:539 2022 H3C LAGG/6/LAGG_ACTIVE: Member port GE1/0/16 of aggregation group BAGG1 changed to the active state. %Oct 23 18:06:47:596 2022 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface GigabitEthernet1/0/15 changed to up. 

 %Oct 23 18:06:47:598 2022 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface GigabitEthernet1/0/11 changed to up. 

 %Oct 23 18:06:47:599 2022 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface GigabitEthernet1/0/11 changed to up. 

 %Oct 23 18:06:47:600 2022 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface GigabitEthernet1/0/16 changed to up. 

 %Oct 23 18:06:47:675 2022 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface GigabitEthernet1/0/16 changed to up. 

 %Oct 23 18:06:48:559 2022 H3C LLDP/6/LLDP_CREATE_NEIGHBOR: -Slot=1; Nearest bridge agent neighbor created on port GigabitEthernet1/0/14 (IfIndex 14), neighbor's chassis ID is 542b-de3f-3490, port ID is GigabitEthernet2/0/14. 

 %Oct 23 18:07:10:394 2022 H3C BFD/5/BFD_MAD_INTERFACE_CHANGE_STATE: BFD MAD function enabled on Vlan-interface10 changed to the normal state.tion group BAGG4 changed to the inactive state, because the physical state of the port is down. 

 %Oct 23 18:04:09:492 2022 H3C LAGG/6/LAGG_INACTIVE_PHYSTATE: Member port GE1/0/20 of aggregation group BAGG5 changed to the inactive state, because the physical state of the port is down. 

 %Oct 23 18:04:10:508 2022 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface Vlan-interface10 changed to down. 

 %Oct 23 18:04:10:547 2022 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface Vlan-interface10 changed to down. 

 %Oct 23 18:05:10:416 2022 H3C BFD/4/BFD_MAD_INTERFACE_CHANGE_STATE: BFD MAD function enabled on Vlan-interface10 changed to the faulty state. 

 %Oct 23 18:05:28:784 2022 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface Ten-GigabitEthernet2/0/28 changed to up. 

 %Oct 23 18:05:28:786 2022 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface Ten-GigabitEthernet2/0/28 changed to up. 

 %Oct 23 18:05:29:267 2022 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface Ten-GigabitEthernet2/0/27 changed to up. 

 %Oct 23 18:05:29:269 2022 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface Ten-GigabitEthernet2/0/27 changed to up. 

 %Oct 23 18:05:33:356 2022 H3C STM/6/STM_LINK_UP: IRF port 2 came up. 

 %Oct 23 18:05:56:816 2022 H3C DEV/5/BOARD_STATE_NORMAL: Board state changed to Normal on slot 1, type is MAIN_BOARD_TYPE_S5560X_30C_EI. 

 %Oct 23 18:05:57:735 2022 H3C OPTMOD/4/MODULE_IN: -Slot=1; Ten-GigabitEthernet1/0/27: The transceiver is STACK_SFP_PLUS. 

 %Oct 23 18:05:57:759 2022 H3C OPTMOD/4/MODULE_IN: -Slot=1; Ten-GigabitEthernet1/0/28: The transceiver is STACK_SFP_PLUS. 

 %Oct 23 18:06:01:633 2022 H3C OPTMOD/4/MODULE_IN: -Slot=1; GigabitEthernet1/0/17: The transceiver is 1000_BASE_LX_SFP. 

 %Oct 23 18:06:01:892 2022 H3C OPTMOD/4/MODULE_IN: -Slot=1; GigabitEthernet1/0/18: The transceiver is 1000_BASE_LX_SFP. 

 %Oct 23 18:06:02:153 2022 H3C OPTMOD/4/MODULE_IN: -Slot=1; GigabitEthernet1/0/19: The transceiver is 1000_BASE_LX_SFP. 

 %Oct 23 18:06:02:410 2022 H3C OPTMOD/4/MODULE_IN: -Slot=1; GigabitEthernet1/0/20: The transceiver is 1000_BASE_LX_SFP. 

 %Oct 23 18:06:10:551 2022 H3C LLDP/5/LLDP_NEIGHBOR_AGE_OUT: Nearest bridge agent neighbor aged out on port GigabitEthernet2/0/14 (IfIndex 77), neighbor's chassis ID is 542b-de3f-3490, port ID is GigabitEthernet1/0/14. 

 %Oct 23 18:06:44:840 2022 H3C LLDP/6/LLDP_CREATE_NEIGHBOR: Nearest bridge agent neighbor created on port Ten-GigabitEthernet2/0/28 (IfIndex 91), neighbor's chassis ID is 542b-de3f-3490, port ID is Ten-GigabitEthernet1/0/27. 

 %Oct 23 18:06:44:863 2022 H3C LLDP/6/LLDP_CREATE_NEIGHBOR: Nearest bridge agent neighbor created on port Ten-GigabitEthernet2/0/27 (IfIndex 90), neighbor's chassis ID is 542b-de3f-3490, port ID is Ten-GigabitEthernet1/0/28. 

 %Oct 23 18:06:44:872 2022 H3C HA/5/HA_BATCHBACKUP_STARTED: Batch backup of standby board in slot 1 started. 

 %Oct 23 18:06:44:874 2022 H3C LLDP/6/LLDP_CREATE_NEIGHBOR: -Slot=1; Nearest bridge agent neighbor created on port Ten-GigabitEthernet1/0/27 (IfIndex 27), neighbor's chassis ID is 542b-de3f-3490, port ID is Ten-GigabitEthernet2/0/28. 

 %Oct 23 18:06:44:878 2022 H3C LLDP/6/LLDP_CREATE_NEIGHBOR: -Slot=1; Nearest bridge agent neighbor created on port Ten-GigabitEthernet1/0/28 (IfIndex 28), neighbor's chassis ID is 542b-de3f-3490, port ID is Ten-GigabitEthernet2/0/27. 

 %Oct 23 18:06:44:896 2022 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface Ten-GigabitEthernet1/0/27 changed to up. 

 %Oct 23 18:06:44:897 2022 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface Ten-GigabitEthernet1/0/27 changed to up. 

 %Oct 23 18:06:44:898 2022 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface Ten-GigabitEthernet1/0/28 changed to up. 

 %Oct 23 18:06:44:899 2022 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface Ten-GigabitEthernet1/0/28 changed to up. 

 %Oct 23 18:06:45:067 2022 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface GigabitEthernet1/0/20 changed to up. 

 %Oct 23 18:06:45:088 2022 H3C BFD/5/BFD_CHANGE_FSM: Sess[192.168.100.1/192.168.104.254, LD/RD:155/131, Interface:GE1/0/18, SessType:Ctrl, LinkType:INET], Ver:1, Sta: DOWN->UP, Diag: 0 (No Diagnostic) 

 %Oct 23 18:06:45:115 2022 H3C BFD/5/BFD_CHANGE_FSM: Sess[192.168.100.1/192.168.106.254, LD/RD:156/132, Interface:GE1/0/20, SessType:Ctrl, LinkType:INET], Ver:1, Sta: DOWN->UP, Diag: 0 (No Diagnostic) 

 %Oct 23 18:06:45:131 2022 H3C BFD/5/BFD_CHANGE_FSM: Sess[192.168.100.1/192.168.105.254, LD/RD:157/133, Interface:GE1/0/19, SessType:Ctrl, LinkType:INET], Ver:1, Sta: DOWN->UP, Diag: 0 (No Diagnostic) 

 %Oct 23 18:06:45:135 2022 H3C LAGG/6/LAGG_ACTIVE: Member port GE1/0/18 of aggregation group BAGG3 changed to the active state. %Oct 23 18:06:45:162 2022 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface GigabitEthernet1/0/19 changed to up. 

 %Oct 23 18:06:45:162 2022 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface GigabitEthernet1/0/18 changed to up. 

 %Oct 23 18:06:45:188 2022 H3C LLDP/6/LLDP_CREATE_NEIGHBOR: -Slot=1; Nearest bridge agent neighbor created on port GigabitEthernet1/0/20 (IfIndex 20), neighbor's chassis ID is 6893-2069-d29b, port ID is GigabitEthernet1/0/17. 

 %Oct 23 18:06:45:218 2022 H3C LAGG/6/LAGG_ACTIVE: Member port GE1/0/19 of aggregation group BAGG4 changed to the active state. %Oct 23 18:06:45:234 2022 H3C LAGG/6/LAGG_ACTIVE: Member port GE1/0/20 of aggregation group BAGG5 changed to the active state. %Oct 23 18:06:45:412 2022 H3C LLDP/6/LLDP_CREATE_NEIGHBOR: -Slot=1; Nearest bridge agent neighbor created on port GigabitEthernet1/0/19 (IfIndex 19), neighbor's chassis ID is 6893-2069-c75b, port ID is GigabitEthernet1/0/17. 

 %Oct 23 18:06:45:492 2022 H3C BFD/5/BFD_CHANGE_FSM: Sess[192.168.100.1/192.168.103.254, LD/RD:158/135, Interface:GE1/0/17, SessType:Ctrl, LinkType:INET], Ver:1, Sta: DOWN->UP, Diag: 0 (No Diagnostic) 

 %Oct 23 18:06:45:511 2022 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface GigabitEthernet1/0/17 changed to up. 

 %Oct 23 18:06:45:511 2022 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface GigabitEthernet1/0/18 changed to up. 

 %Oct 23 18:06:45:529 2022 H3C LAGG/6/LAGG_ACTIVE: Member port GE1/0/17 of aggregation group BAGG2 changed to the active state. %Oct 23 18:06:45:534 2022 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface GigabitEthernet1/0/19 changed to up. 

 %Oct 23 18:06:45:535 2022 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface GigabitEthernet1/0/20 changed to uH3C DEV/5/FAN_RECOVERED: Fan 2 recovered. 

 %Oct 23 18:04:08:112 2022 H3C STM/3/STM_LINK_DOWN: IRF port 2 went down. 

 %Oct 23 18:04:08:173 2022 H3C HA/5/HA_STANDBY_TO_MASTER: Standby board in slot 2 changed to master. 

 %Oct 23 18:04:08:769 2022 H3C DEV/2/BOARD_STATE_FAULT: Board state changed to Fault on slot 1, type is MAIN_BOARD_TYPE_S5560X_30C_EI. 

 %Oct 23 18:04:09:193 2022 H3C LAGG/6/LAGG_INACTIVE_PHYSTATE: Member port GE1/0/15 of aggregation group BAGG1 changed to the inactive state, because the physical state of the port is down. 

 %Oct 23 18:04:09:194 2022 H3C LAGG/6/LAGG_INACTIVE_PHYSTATE: Member port GE1/0/16 of aggregation group BAGG1 changed to the inactive state, because the physical state of the port is down. 

 %Oct 23 18:04:09:259 2022 H3C LAGG/6/LAGG_INACTIVE_PHYSTATE: Member port GE1/0/17 of aggregation group BAGG2 changed to the inactive state, because the physical state of the port is down. 

 %Oct 23 18:04:09:334 2022 H3C LAGG/6/LAGG_INACTIVE_PHYSTATE: Member port GE1/0/18 of aggregation group BAGG3 changed to the inactive state, because the physical state of the port is down. 

 %Oct 23 18:04:09:414 2022 H3C LAGG/6/LAGG_INACTIVE_PHYSTATE: Member port GE1/0/19 of aggregation group BAGG4 changed to the inactive state, because the physical state of the port is down. 

 %Oct 23 18:04:09:492 2022 H3C LAGG/6/LAGG_INACTIVE_PHYSTATE: Member port GE1/0/20 of aggregation group BAGG5 changed to the inactive state, because the physical state of the port is down. 

 %Oct 23 18:04:10:508 2022 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface Vlan-interface10 changed to down. 

 %Oct 23 18:04:10:547 2022 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface Vlan-interface10 changed to down. 

 %Oct 23 18:05:10:416 2022 H3C BFD/4/BFD_MAD_INTERFACE_CHANGE_STATE: BFD MAD function enabled on Vlan-interface10 changed to the faulty state. 

 %Oct 23 18:05:28:784 2022 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface Ten-GigabitEthernet2/0/28 changed to up. 

 %Oct 23 18:05:28:786 2022 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface Ten-GigabitEthernet2/0/28 changed to up. 

 %Oct 23 18:05:29:267 2022 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface Ten-GigabitEthernet2/0/27 changed to up. 

 %Oct 23 18:05:29:269 2022 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface Ten-GigabitEthernet2/0/27 changed to up. 

 %Oct 23 18:05:33:356 2022 H3C STM/6/STM_LINK_UP: IRF port 2 came up. 

 %Oct 23 18:05:56:816 2022 H3C DEV/5/BOARD_STATE_NORMAL: Board state changed to Normal on slot 1, type is MAIN_BOARD_TYPE_S5560X_30C_EI. 

 %Oct 23 18:05:57:735 2022 H3C OPTMOD/4/MODULE_IN: -Slot=1; Ten-GigabitEthernet1/0/27: The transceiver is STACK_SFP_PLUS. 

 %Oct 23 18:05:57:759 2022 H3C OPTMOD/4/MODULE_IN: -Slot=1; Ten-GigabitEthernet1/0/28: The transceiver is STACK_SFP_PLUS. 

 %Oct 23 18:06:01:633 2022 H3C OPTMOD/4/MODULE_IN: -Slot=1; GigabitEthernet1/0/17: The transceiver is 1000_BASE_LX_SFP. 

 %Oct 23 18:06:01:892 2022 H3C OPTMOD/4/MODULE_IN: -Slot=1; GigabitEthernet1/0/18: The transceiver is 1000_BASE_LX_SFP. 

 %Oct 23 18:06:02:153 2022 H3C OPTMOD/4/MODULE_IN: -Slot=1; GigabitEthernet1/0/19: The transceiver is 1000_BASE_LX_SFP. 

 %Oct 23 18:06:02:410 2022 H3C OPTMOD/4/MODULE_IN: -Slot=1; GigabitEthernet1/0/20: The transceiver is 1000_BASE_LX_SFP. 

 %Oct 23 18:06:10:551 2022 H3C LLDP/5/LLDP_NEIGHBOR_AGE_OUT: Nearest bridge agent neighbor aged out on port GigabitEthernet2/0/14 (IfIndex 77), neighbor's chassis ID is 542b-de3f-3490, port ID is GigabitEthernet1/0/14. 

 %Oct 23 18:06:44:840 2022 H3C LLDP/6/LLDP_CREATE_NEIGHBOR: Nearest bridge agent neighbor created on port Ten-GigabitEthernet2/0/28 (IfIndex 91), neighbor's chassis ID is 542b-de3f-3490, port ID is Ten-GigabitEthernet1/0/27. 

 %Oct 23 18:06:44:863 2022 H3C LLDP/6/LLDP_CREATE_NEIGHBOR: Nearest bridge agent neighbor created on port Ten-GigabitEthernet2/0/27 (IfIndex 90), neighbor's chassis ID is 542b-de3f-3490, port ID is Ten-GigabitEthernet1/0/28. 

 %Oct 23 18:06:44:872 2022 H3C HA/5/HA_BATCHBACKUP_STARTED: Batch backup of standby board in slot 1 started. 

 %Oct 23 18:06:44:874 2022 H3C LLDP/6/LLDP_CREATE_NEIGHBOR: -Slot=1; Nearest bridge agent neighbor created on port Ten-GigabitEthernet1/0/27 (IfIndex 27), neighbor's chassis ID is 542b-de3f-3490, port ID is Ten-GigabitEthernet2/0/28. 

 %Oct 23 18:06:44:878 2022 H3C LLDP/6/LLDP_CREATE_NEIGHBOR: -Slot=1; Nearest bridge agent neighbor created on port Ten-GigabitEthernet1/0/28 (IfIndex 28), neighbor's chassis ID is 542b-de3f-3490, port ID is Ten-GigabitEthernet2/0/27. 

 %Oct 23 18:06:44:896 2022 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface Ten-GigabitEthernet1/0/27 changed to up. 

 %Oct 23 18:06:44:897 2022 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface Ten-GigabitEthernet1/0/27 changed to up. 

 %Oct 23 18:06:44:898 2022 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface Ten-GigabitEthernet1/0/28 changed to up. 

 %Oct 23 18:06:44:899 2022 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface Ten-GigabitEthernet1/0/28 changed to up. 

 %Oct 23 18:06:45:067 2022 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface GigabitEthernet1/0/20 changed to up. 

 %Oct 23 18:06:45:088 2022 H3C BFD/5/BFD_CHANGE_FSM: Sess[192.168.100.1/192.168.104.254, LD/RD:155/131, Interface:GE1/0/18, SessType:Ctrl, LinkType:INET], Ver:1, Sta: DOWN->UP, Diag: 0 (No Diagnostic) 

 %Oct 23 18:06:45:115 2022 H3C BFD/5/BFD_CHANGE_FSM: Sess[192.168.100.1/192.168.106.254, LD/RD:156/132, Interface:GE1/0/20, SessType:Ctrl, LinkType:INET], Ver:1, Sta: DOWN->UP, Diag: 0 (No Diagnostic) 

 %Oct 23 18:06:45:131 2022 H3C BFD/5/BFD_CHANGE_FSM: Sess[192.168.100.1/192.168.105.254, LD/RD:157/133, Interface:GE1/0/19, SessType:Ctrl, LinkType:INET], Ver:1, Sta: DOWN->UP, Diag: 0 (No Diagnostic) 

 %Oct 23 18:06:45:135 2022 H3C LAGG/6/LAGG_ACTIVE: Member port GE1/0/18 of aggregation group BAGG3 changed to the active state. %Oct 23 18:06:45:162 2022 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface GigabitEthernet1/0/19 changed to up. 

 %Oct 23 18:06:45:162 2022 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface GigabitEthernet1/0/18 changed to up. 

 %Oct 23 18:06:45:188 2022 H3C LLDP/6/LLDP_CREATE_NEIGHBOR: -Slot=1; Nearest bridge agent neighbor created on port GigabitEthernet1/0/20 (IfIndex 20), neighbor's chassis ID is 6893-2069-d29b, port ID is GigabitEthernet1/0/17. 

 %Oct 23 18:06:45:218 2022 H3C LAGG/6/LAGG_ACTIVE: Member port GE1/0/19 of aggregation group BAGG4 changed to the active state. %Oct 23 18:06:45:234 2022 H3C LAGG/6/LAGG_ACTIVE: Member port GE1/0/20 of aggregation group BAGG5 changed to the active state. %Oct 23 18:06:45:412 2022 H3C LLDP/6/LLDP_CREATE_NEIGHBOR: -Slot=1; Nearest bridge agent neighbor created on port GigabitEthernet1/0/19 (IfIndex 19), neighbor's chassis ID is 6893-2069-c75b, port ID is GigabitEthernet1/0/17. 

 %Oct 23 18:06:45:492 2022 H3C BFD/5/BFD_CHANGE_FSM: Sess[192.168.100.1/192.168.103.254, LD/RD:158/135, Interface:GE1/0/17, SessType:Ctrl, LinkType:INET], Ver:1, Sta: DOWN->UP, Diag: 0 (No Diagnostic) 

 %Oct 23 18:06:45:511 2022 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface GigabitEthernet1/0/17 changed to up. %Oct 23 18:06:45:511 2022 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface GigabitEthernet1/0/18 changed to up. 

 %Oct 23 18:06:45:529 2022 H3C LAGG/6/LAGG_ACTIVE: Member port GE1/0/17 of aggregation group BAGG2 changed to the active state. %Oct 23 18:06:45:534 2022 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface GigabitEthernet1/0/19 changed to up. 

 %Oct 23 18:06:45:535 2022 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface GigabitEthernet1/0/20 changed to up. 

 %Oct 23 18:06:45:594 2022 H3C LLDP/6/LLDP_CREATE_NEIGHBOR: -Slot=1; Nearest bridge agent neighbor created on port GigabitEthernet1/0/18 (IfIndex 18), neighbor's chassis ID is 9429-2f48-e7cb, port ID is Ten-GigabitEthernet1/0/28. 

 %Oct 23 18:06:45:671 2022 H3C LLDP/6/LLDP_CREATE_NEIGHBOR: -Slot=1; Nearest bridge agent neighbor created on port GigabitEthernet1/0/17 (IfIndex 17), neighbor's chassis ID is 9429-2f48-9fcb, port ID is Ten-GigabitEthernet1/0/28. 

 %Oct 23 18:06:45:726 2022 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface GigabitEthernet1/0/17 changed to up. 

 %Oct 23 18:06:45:875 2022 H3C HA/5/HA_BATCHBACKUP_FINISHED: Batch backup of standby board in slot 1 has finished. 

 %Oct 23 18:06:47:136 2022 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface GigabitEthernet1/0/3 changed to up. 

 %Oct 23 18:06:47:138 2022 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface GigabitEthernet1/0/3 changed to up. 

 %Oct 23 18:06:47:211 2022 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface GigabitEthernet1/0/1 changed to up. 

 %Oct 23 18:06:47:212 2022 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface GigabitEthernet1/0/1 changed to up. 

 %Oct 23 18:06:47:307 2022 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface GigabitEthernet2/0/14 changed to up. 

 %Oct 23 18:06:47:309 2022 H3C LAGG/6/LAGG_ACTIVE: Member port GE1/0/15 of aggregation group BAGG1 changed to the active state. %Oct 23 18:06:47:323 2022 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface GigabitEthernet2/0/14 changed to up. 

 %Oct 23 18:06:47:347 2022 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface Vlan-interface10 changed to up. 

 %Oct 23 18:06:47:349 2022 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface Vlan-interface10 changed to up. 

 %Oct 23 18:06:47:351 2022 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface GigabitEthernet1/0/15 changed to up. 

 %Oct 23 18:06:47:351 2022 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface GigabitEthernet1/0/14 changed to up. 

 %Oct 23 18:06:47:354 2022 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface GigabitEthernet1/0/14 changed to up. 

 %Oct 23 18:06:47:535 2022 H3C LLDP/6/LLDP_CREATE_NEIGHBOR: Nearest bridge agent neighbor created on port GigabitEthernet2/0/14 (IfIndex 77), neighbor's chassis ID is 542b-de3f-3490, port ID is GigabitEthernet1/0/14. 

 %Oct 23 18:06:47:539 2022 H3C LAGG/6/LAGG_ACTIVE: Member port GE1/0/16 of aggregation group BAGG1 changed to the active state. %Oct 23 18:06:47:596 2022 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface GigabitEthernet1/0/15 changed to up. 

 %Oct 23 18:06:47:598 2022 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface GigabitEthernet1/0/11 changed to up. 

 %Oct 23 18:06:47:599 2022 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface GigabitEthernet1/0/11 changed to up. 

 %Oct 23 18:06:47:600 2022 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface GigabitEthernet1/0/16 changed to up. 

 %Oct 23 18:06:47:675 2022 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface GigabitEthernet1/0/16 changed to up. 

 %Oct 23 18:06:48:559 2022 H3C LLDP/6/LLDP_CREATE_NEIGHBOR: -Slot=1; Nearest bridge agent neighbor created on port GigabitEthernet1/0/14 (IfIndex 14), neighbor's chassis ID is 542b-de3f-3490, port ID is GigabitEthernet2/0/14. 

 %Oct 23 18:07:10:394 2022 H3C BFD/5/BFD_MAD_INTERFACE_CHANGE_STATE: BFD MAD function enabled on Vlan-interface10 changed to the normal state.

组网及组网描述：

版本：版本 7.1.070， 版本 1118P07

1/0/27、1/0/28

2/0/27、2/0/28是用3米的堆叠线连接的


irf-port 1/1 

 port group interface Ten-GigabitEthernet1/0/27 

 port group interface Ten-GigabitEthernet1/0/28 

# 

irf-port 2/2 

 port group interface Ten-GigabitEthernet2/0/27 

 port group interface Ten-GigabitEthernet2/0/28

#

VLAN10 MAD BFD，1/0/14、2/0/14


BAGG2 1/0/17、2/0/17，光模块，有BFD检测

BAGG3 1/0/18、2/0/18，光模块，有BFD检测

BAGG3 1/0/19、2/0/19，光模块，有BFD检测

BAGG4 1/0/20、2/0/20，光模块，有BFD检测

2 个回答
按时间 按赞数
已采纳
zhiliao_sEUyB
zhiliao_sEUyB 九段
粉丝：115人 关注：8人

检查一下堆叠链路的 功率情况 

没有光模块，堆叠线缆是2根，2根都有问题？1根堆叠线缆正常irf可以正常工作吗？

zhiliao_Fm3XDW 发表时间：2022-12-02
回复zhiliao_Fm3XDW:

1跟也可以，但是链路出问题，堆叠就分裂了

zhiliao_sEUyB 发表时间：2022-12-02

我的意思是有2根，即使有1根有问题也可以正常工作吧。请问 %Oct 23 18:04:08:112 2022 H3C STM/3/STM_LINK_DOWN: IRF port 2 went down. 是模块2 down了？模块1是master? 如果堆叠线缆有问题是不是应该模块1是master，我看日志象是模块2是master，是不是模块1主板出问题了？

zhiliao_Fm3XDW 发表时间：2022-12-02
回复zhiliao_Fm3XDW:

是的。都down

zhiliao_sEUyB 发表时间：2022-12-02
回复zhiliao_Fm3XDW:

irf主设备down了，备设备接替主设备了，

zhiliao_sEUyB 发表时间：2022-12-02
慢节奏
慢节奏 五段
粉丝：1人 关注：3人

检查一下堆叠线缆模块是否正常

堆叠线缆是2根，2根都有问题？如1根正常irf可以正常工作吗？

zhiliao_Fm3XDW 发表时间：2022-12-02

编辑答案

你正在编辑答案

如果你要对问题或其他回答进行点评或询问，请使用评论功能。

✖

分享扩散:

➤

提出建议

✖

    +
网站相关
关于我们
服务条款
帮助中心
经验与权限
积分规则
联系我们
联系我们
建议反馈
常用链接
知了APP下载
标杆的神器下载
关注我们
H3C官网
新华三服务公众号
安仔远程运维服务
新华三商城
内容许可
除特别说明外，用户内容均可采用知识共享署名-相同方式共享3.0中国大陆许可协议进行许可

Copyright©2024新华三集团保留一切权利 当前呈现版本 NO.1

本图标版权归新华三集团所有，仅限本社区使用，切勿用做商业目的，违者必究

浙ICP备09064986号-1   浙公网安备 33010802004416号

✖

亲~登录后才可以操作哦!

确定
✖

亲~检测到您登陆的账号未在http://hclhub.h3c.com进行注册

注册后可访问此模块

跳转hclhub
✖

你的邮箱还未认证，请认证邮箱或绑定手机后进行当前操作

✖

举报

×

侵犯我的权益 >
对根叔社区有害的内容 >
辱骂、歧视、挑衅等（不友善）

侵犯我的权益

×

泄露了我的隐私 >
侵犯了我企业的权益 >
抄袭了我的内容 >
诽谤我 >
辱骂、歧视、挑衅等（不友善）
骚扰我

泄露了我的隐私

×

您好，当您发现根叔知了上有泄漏您隐私的内容时，您可以向根叔知了进行举报。 请您把以下内容通过邮件发送到pub.zhiliao@h3c.com 邮箱，我们会尽快处理。
  • 1. 您认为哪些内容泄露了您的隐私？（请在邮件中列出您举报的内容、链接地址，并给出简短的说明）
  • 2. 您是谁？（身份证明材料，可以是身份证或护照等证件）

侵犯了我企业的权益

×

您好，当您发现根叔知了上有关于您企业的造谣与诽谤、商业侵权等内容时，您可以向根叔知了进行举报。 请您把以下内容通过邮件发送到 pub.zhiliao@h3c.com 邮箱，我们会在审核后尽快给您答复。
  • 1. 您举报的内容是什么？（请在邮件中列出您举报的内容和链接地址）
  • 2. 您是谁？（身份证明材料，可以是身份证或护照等证件）
  • 3. 是哪家企业？（营业执照，单位登记证明等证件）
  • 4. 您与该企业的关系是？（您是企业法人或被授权人，需提供企业委托授权书）
我们认为知名企业应该坦然接受公众讨论，对于答案中不准确的部分，我们欢迎您以正式或非正式身份在根叔知了上进行澄清。

抄袭了我的内容

×

原文链接或出处

诽谤我

×

您好，当您发现根叔知了上有诽谤您的内容时，您可以向根叔知了进行举报。 请您把以下内容通过邮件发送到pub.zhiliao@h3c.com 邮箱，我们会尽快处理。
  • 1. 您举报的内容以及侵犯了您什么权益？（请在邮件中列出您举报的内容、链接地址，并给出简短的说明）
  • 2. 您是谁？（身份证明材料，可以是身份证或护照等证件）
我们认为知名企业应该坦然接受公众讨论，对于答案中不准确的部分，我们欢迎您以正式或非正式身份在根叔知了上进行澄清。

对根叔社区有害的内容

×

垃圾广告信息
色情、暴力、血腥等违反法律法规的内容
政治敏感
不规范转载 >
辱骂、歧视、挑衅等（不友善）
骚扰我
诱导投票

不规范转载

×

举报说明