ipsec vpn 起不来ikev2
- 0关注
- 0收藏，831浏览
问题描述：
Dec 24 19:01:45:636 2022 FW IKEV2/7/EVENT: [IPsec->IKE] Get an IPsec SA acquire request.
*Dec 24 19:01:45:637 2022 FW IKEV2/7/FSM: vrf = 0, src = 119.253.34.46, dst = 36.110.25.251/500
(Tunnel ID 833): (I) Current State: IDLE.
*Dec 24 19:01:45:637 2022 FW IKEV2/7/FSM: vrf = 0, src = 119.253.34.46, dst = 36.110.25.251/500
Choose profile 1.
*Dec 24 19:01:45:637 2022 FW IKEV2/7/FSM: vrf = 0, src = 119.253.34.46, dst = 36.110.25.251/500
Getting pre-shared key from profile keychain 1.
*Dec 24 19:01:45:637 2022 FW IKEV2/7/FSM: vrf = 0, src = 119.253.34.46, dst = 36.110.25.251/500
Getting pre-shared key by address 36.110.25.251.
*Dec 24 19:01:45:637 2022 FW IKEV2/7/FSM: vrf = 0, src = 119.253.34.46, dst = 36.110.25.251/500
Peer 1 matched.
*Dec 24 19:01:45:637 2022 FW IKEV2/7/FSM: vrf = 0, src = 119.253.34.46, dst = 36.110.25.251/500
Search policy with vrf 0, local address 119.253.34.46.
*Dec 24 19:01:45:637 2022 FW IKEV2/7/ERROR: vrf = 0, src = 119.253.34.46, dst = 36.110.25.251/500
Failed to find policy.
*Dec 24 19:01:45:637 2022 FW IKEV2/7/EVENT: vrf = 0, src = 119.253.34.46, dst = 36.110.25.251/500
[IKE->IPsec] Send delete DPD request.
*Dec 24 19:01:45:637 2022 FW IKEV2/7/FSM: vrf = 0, src = 119.253.34.46, dst = 36.110.25.251/500
(Tunnel ID 833): IKE SA deleted.
组网及组网描述：
ikve2起不来 之前起来过突然断了
- 2022-12-24提问
- 举报
-
(0)
- 2022-12-24回答
- 评论(3)
- 举报
-
(0)
-----------------------------
Sequence number: 1
Mode: ISAKMP
-----------------------------
Traffic Flow Confidentiality: Disabled
Security data flow: 3000
Selector mode: standard
Local address: 119.253.34.46
Remote address: 36.110.25.251
Transform set: 1
IKE profile:
IKEv2 profile: 1
smart-link policy:
SA trigger mode: Traffic-based
SA duration(time based): 3600 seconds
SA duration(traffic based): 5242880 kilobytes
SA soft-duration buffer(time based): --
SA soft-duration buffer(traffic based): --
SA idle time: --
- 2022-12-24回答
- 评论(0)
- 举报
-
(0)
您好，请知：
IPSEC VPN故障排查：
1、检查公网地址的连通性
2、检查ipsec acl是否配置正确（两端ACL以互为镜像的方式配置）
3、检查ike keychain/ike profile 协商参数配置是否正确（工作模式、keychain、identity、本端/对端隧道地址或隧道名称、NAT穿越功能v7自适应）
4、检查ipsec proposal（v5平台） /ipsec transform-set（v7平台）参数两端是否一致（封装模式、安全协议、验证算法、加密算法）
5、检查设备是否创建ipsec策略，并加载协商参数（acl、ike profile 、ipsec transform-set、对端隧道IP）
6、检查ipsec策略是否应用在正确的接口上
IPSEC排查命令：
1、disp ipsec policy
2、disp acl
3、dis cu conf ike-profile
4、dis cu conf ike-keychain
5、display ike proposal
6、display ipsec transform-set
7、disp ike sa (verbose)
8、disp ipsec sa
9、reset ipsec sa
10、reset ike sa
- 2022-12-24回答
- 评论(0)
- 举报
-
(0)
编辑答案
亲~登录后才可以操作哦!
确定你的邮箱还未认证，请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
- 1. 您举报的内容是什么？（请在邮件中列出您举报的内容和链接地址）
- 2. 您是谁？（身份证明材料，可以是身份证或护照等证件）
- 3. 是哪家企业？（营业执照，单位登记证明等证件）
- 4. 您与该企业的关系是？（您是企业法人或被授权人，需提供企业委托授权书）
抄袭了我的内容
×
原文链接或出处
诽谤我
×
- 1. 您举报的内容以及侵犯了您什么权益？（请在邮件中列出您举报的内容、链接地址，并给出简短的说明）
- 2. 您是谁？（身份证明材料，可以是身份证或护照等证件）
对根叔社区有害的内容
×
不规范转载
×
举报说明
----------------------------- Sequence number: 1 Mode: ISAKMP ----------------------------- Traffic Flow Confidentiality: Disabled Security data flow: 3000 Selector mode: standard Local address: 119.253.34.46 Remote address: 36.110.25.251 Transform set: 1 IKE profile: IKEv2 profile: 1 smart-link policy: SA trigger mode: Traffic-based SA duration(time based): 3600 seconds SA duration(traffic based): 5242880 kilobytes SA soft-duration buffer(time based): -- SA soft-duration buffer(traffic based): -- SA idle time: --
能给个解决思路嘛，真的不会了
参考下常见配置举例，看看有没有思路