irf改m-lag，IPP聚合接口起不来，m-lag系统也起不来

irf改m-lag，IPP聚合接口起不来，m-lag系统也起不来，只做m-lag实验是正常的，先做irf再改m-lag就不正常，是否有需要修改什么配置？

聚合口和m-lag显示down的原因好像都和cpdus有关

S6850_1:

#

interface Bridge-Aggregation1

 port link-type trunk

 port trunk permit vlan all

 link-aggregation mode dynamic

 port m-lag peer-link 1

#

interface Route-Aggregation1

 ip address 12.12.12.1 255.255.255.0

 link-aggregation mode dynamic

#

 interface FortyGigE1/0/53

 port link-mode bridge

 port link-type trunk

 port trunk permit vlan all

 port link-aggregation group 1

#

interface FortyGigE1/0/54

 port link-mode bridge

 port link-type trunk

 port trunk permit vlan all

 port link-aggregation group 1

#

 m-lag mad exclude interface GigabitEthernet1/0/1

 m-lag mad exclude interface Route-Aggregation1

 m-lag mad exclude interface Vlan-interface3

 m-lag mad exclude interface Vlan-interface4

 m-lag restore-delay 300

 m-lag system-mac 0001-0001-0001

 m-lag system-number 1

 m-lag system-priority 123

 m-lag standalone enable

 m-lag keepalive ip destination 12.12.12.2 source 12.12.12.1

#

 S6850_2:

#

interface Bridge-Aggregation1

 port link-type trunk

 port trunk permit vlan all

 link-aggregation mode dynamic

 port m-lag peer-link 1

#

 interface Route-Aggregation1

 ip address 12.12.12.2 255.255.255.0

 link-aggregation mode dynamic

#

interface FortyGigE2/0/53

 port link-mode bridge

 port link-type trunk

 port trunk permit vlan all

 port link-aggregation group 1

#

interface FortyGigE2/0/54

 port link-mode bridge

 port link-type trunk

 port trunk permit vlan all

 port link-aggregation group 1

#

 m-lag mad exclude interface GigabitEthernet2/0/1

 m-lag mad exclude interface Route-Aggregation1

 m-lag mad exclude interface Vlan-interface3

 m-lag mad exclude interface Vlan-interface4

 m-lag restore-delay 300

 m-lag role priority 100

 m-lag system-mac 0001-0001-0001

 m-lag system-number 2

 m-lag system-priority 123

 m-lag standalone enable

 m-lag keepalive ip destination 12.12.12.1 source 12.12.12.2

#