S7003X IRF堆叠告警

如下日志告警，交换机堆叠断开，端口显示down

Physical state on the interface Ten-GigabitEthernet1/0/0/27 changed to down.

然后紧接着板卡出现告警

Board state changed to Fault on chassis 2 slot 0, type is LSCM2CGP24TSSC8. 

Board was removed from chassis 2 slot 0, type is unknown

请问下这样是堆叠线断开会导致交换机的板卡出现告警么，还是板卡的故障导致的堆叠断开

%Feb 10 04:46:33:406 2023 S7003X-3F STM/3/STM_PHY_DOWN: Physical interface Ten1/0/0/27 of IRF port 2 went down.

 %Feb 10 04:46:33:414 2023 S7003X-3F IFNET/3/PHY_UPDOWN: Physical state on the interface Ten-GigabitEthernet1/0/0/27 changed to down. 

%Feb 10 04:46:33:416 2023 S7003X-3F IFNET/5/LINK_UPDOWN: Line protocol state on the interface Ten-GigabitEthernet1/0/0/27 changed to down.

 %Feb 10 04:46:33:458 2023 S7003X-3F STM/3/STM_PHY_DOWN: Physical interface Ten1/0/0/28 of IRF port 2 went down. 

%Feb 10 04:46:33:461 2023 S7003X-3F STM/3/STM_LINK_DOWN: IRF port 2 went down. 

%Feb 10 04:46:33:593 2023 S7003X-3F STM/3/STM_PHY_DOWN: Physical interface Ten1/0/0/28 of IRF port 2 went down.

 %Feb 10 04:46:33:540 2023 S7003X-3F DEV/2/BOARD_STATE_FAULT: Board state changed to Fault on chassis 2 slot 0, type is LSCM2CGP24TSSC8. 

%Feb 10 04:46:33:595 2023 S7003X-3F LAGG/6/LAGG_INACTIVE_NODEREMOVE: Member port GE2/0/0/24 of aggregation group BAGG24 changed to the inactive state, because the card that hosts the port was absent. 

%Feb 10 04:46:33:626 2023 S7003X-3F LAGG/6/LAGG_INACTIVE_NODEREMOVE: Member port XGE2/0/0/26 of aggregation group BAGG26 changed to the inactive state, because the card that hosts the port was absent. 

%Feb 10 04:46:33:669 2023 S7003X-3F IFNET/3/PHY_UPDOWN: Physical state on the interface Ten-GigabitEthernet1/0/0/28 changed to down.

 %Feb 10 04:46:33:687 2023 S7003X-3F IFNET/5/LINK_UPDOWN: Line protocol state on the interface Ten-GigabitEthernet1/0/0/28 changed to down.

 %Feb 10 04:46:33:707 2023 S7003X-3F DEV/3/BOARD_REMOVED: Board was removed from chassis 2 slot 0, type is unknown.