WA5300无线AP升级FAT模式问题

C.1 通过BootWare将FIT模式切换为OASIS模式

1. 升级前的准备

在进行软件升级之前，用户需要准备以太网线缆和配置电缆，按照B.4.1升级前的准备描述进行连接和设置。

图18 AP的工作模式切换示意图（FIT切OASIS）

2. 进入BootWare主菜单

AP设备上电和重新启动的过程中，在配置终端的屏幕上首先将显示：

System is starting...

Press Ctrl+D to access BASIC-BOOTWARE MENU

Booting Normal Extended BootWare

The Extended BootWare is self-decompressing.................................

...Done.

****************************************************************************

* *

* H3C WAP722S-W2 BootWare, Version 7.27 *

* *

****************************************************************************

Copyright (c) 2004-2020 New H3C Technologies Co., Ltd.

Compiled Date : Oct 16 2020

CPU Type : ARM

CPU L1 Cache : 32KB

CPU L2 Cache : 256KB

CPU Clock Speed : 710MHz

Memory Type : DDR3 SDRAM

Memory Size : 256MB

Memory Speed : 667MHz

Flash Size : 32MB

PCB Version : Ver.A

BootWare Validating...

Press Ctrl+B to access EXTENDED-BOOTWARE MENU...

当出现“Press Ctrl+B to access EXTENDED-BOOTWARE MENU...”时，键入<Ctrl+B>，系统进入BootWare主菜单：

Password recovery capability is enabled.

Note: The current operating device is flash

Enter < Storage Device Operation > to select device.

==========================<EXTENDED-BOOTWARE MENU>==========================

|<1> Boot System |

|<2> Enter Serial SubMenu |

|<3> Enter Ethernet SubMenu |

|<4> File Control |

|<5> Restore to Factory Default Configuration |

|<6> Skip Current System Configuration |

|<7> BootWare Operation Menu |

|<8> Skip Authentication for Console Login |

|<9> Storage Device Operation |

|<0> Reboot |

============================================================================

Ctrl+Z: Access EXTENDED ASSISTANT MENU

Ctrl+F: Format File System

Ctrl+C: Display Copyright

Ctrl+Y: Change AP Mode

Enter your choice(0-9):

3. 切换AP模式

在BootWare主菜单下键入< Ctrl+Y>，可以进入AP模式切换菜单，系统显示如下：

Please select the new mode

Current mode is Fit

============================================================================

|NO. Mode |

|1 Fat Mode |

|2 Fit Mode |

|3 Anchor-AC (Virtual AC mode) |

|4 Anchor-Fit |

|5 Oasis Mode

|0 Exit |

============================================================================

Enter your choice(0-2):

在AP模式切换菜单下键入<5>，切换AP的工作模式为OASIS模式。

Enter your choice(0-2):5

Changed to oasis mode successfully!

切换成功后，需要加载OASIS AP版本启动，请通过BootWare下载版本，步骤请参考B.4.2通过BootWare方式手动升级。