OLT接口模式请教

您好，参考

uni口如果只有单一的vlan，就只配uni 1

1.1.9  配置数据/上网业务。

1. 配置规划

表1-2 数据/上网业务配置表格

2. 配置步骤

# 创建动态二层聚合接口1，并加入4个成员端口。

[OLT] interface Bridge-Aggregation 1

[OLT-Bridge-Aggregation1] link-aggregation mode dynamic

[OLT-Bridge-Aggregation1] quit

[OLT] interface Ten-GigabitEthernet 1/1/0/19

[OLT-Ten-GigabitEthernet1/1/0/19] port link-aggregation group 1

[OLT-Ten-GigabitEthernet1/1/0/19] quit

[OLT] interface Ten-GigabitEthernet 1/1/0/20

[OLT-Ten-GigabitEthernet1/1/0/20] port link-aggregation group 1

[OLT-Ten-GigabitEthernet1/1/0/20] quit

[OLT] interface Ten-GigabitEthernet 2/1/0/19

[OLT-Ten-GigabitEthernet2/1/0/19] port link-aggregation group 1

[OLT-Ten-GigabitEthernet2/1/0/19] quit

[OLT] interface Ten-GigabitEthernet 2/1/0/20

[OLT-Ten-GigabitEthernet2/1/0/20] port link-aggregation group 1

[OLT-Ten-GigabitEthernet2/1/0/20] quit

# 创建业务VLAN 101。

[OLT] vlan 101

# 配置上行口Bridge-Aggregation 1为 Trunk口，并且允许VLAN101通过。

[OLT] interface Bridge-Aggregation 1

[OLT-Bridge-Aggregation1] port link-type trunk

[OLT-Bridge-Aggregation1] undo port trunk permit vlan 1

[OLT-Bridge-Aggregation1] port trunk permit vlan 101

[OLT-Bridge-Aggregation1] quit

# 配置OLT1/1/0/1为 Hybrid口，并且允许VLAN101的报文携带VLAN Tag通过。

[OLT] interface olt 1/1/0/1

[OLT-Olt1/1/0/1] port link-type hybrid

[OLT-Olt1/1/0/1] port hybrid vlan 101 tagged

[OLT-Olt1/1/0/1] quit

# 将ONU接入Olt 1/1/0/1，全局已开启自动绑定ONU功能，ONU接口Onu 1/1/0/1:1将被自动创建， 配置接口Onu 1/1/0/1:1为Trunk口并允许所有VLAN通过。

[OLT] interface onu1/1/0/1:1

[OLT-Onu1/1/0/1:1] port link-type trunk

[OLT-Onu1/1/0/1:1] port trunk permit vlan all

[OLT-Onu1/1/0/1:1] quit

# 配置ONU的UNI端口1的VLAN操作模式为VLAN Trunk模式，为PC上送的Untagged报文打上PVID 101的VLAN Tag。

[OLT] interface onu1/1/0/1:1

[OLT-Onu1/1/0/1:1] uni 1 vlan-mode trunk pvid 101

[OLT-Onu1/1/0/1:1] quit