VRRP切换问题

问题：

主核心关机，因为链路聚合有一根线存活vrrp未切换。但是丢包很多。

备核心关机，因为链路聚合有一根线存活vrrp未切换。但是丢包很多。

这个哪里配置问题引起的呢？

两台路由器上下都做了vrrp

两台核心做了 堆叠

主路由器：

nat address-group 1 

 address 192.168.0.100 192.168.0.100 

acl advanced 3000

 rule 0 permit ip 

track 1 interface GigabitEthernet0/0

track 2 interface Route-Aggregation1 

interface GigabitEthernet0/0        外网

 port link-mode route

 ip address 192.168.0.101 255.255.255.0

 vrrp vrid 1 virtual-ip 192.168.0.100 

 vrrp vrid 1 priority 120 

 vrrp vrid 1 preempt-mode delay 100

 vrrp vrid 1 track 1 priority reduced 30

 vrrp vrid 1 track 2 priority reduced 30

 nat outbound 3000 address-group 1 

interface Route-Aggregation1

 ip address 10.10.10.3 255.255.255.248

 link-aggregation mode dynamic

 vrrp vrid 2 virtual-ip 10.10.10.2

 vrrp vrid 2 priority 120

 vrrp vrid 2 preempt-mode delay 100

 vrrp vrid 2 track 1 priority reduced 30

 vrrp vrid 2 track 2 priority reduced 30 

备路由器：

nat address-group 1

 address 192.168.0.100 192.168.0.100

acl advanced 3000

 rule 0 permit ip 

interface GigabitEthernet0/0

 port link-mode route

 ip address 192.168.0.102 255.255.255.0

 vrrp vrid 1 virtual-ip 192.168.0.100

 vrrp vrid 1 priority 110

 nat outbound 3000 address-group 1 

interface Route-Aggregation1

 ip address 10.10.10.4 255.255.255.248

 link-aggregation mode dynamic

 vrrp vrid 2 virtual-ip 10.10.10.2

 vrrp vrid 2 priority 110 

核心：

interface Bridge-Aggregation1

 port access vlan 5

 link-aggregation mode dynamic

 interface Bridge-Aggregation2

 port access vlan 5

 link-aggregation mode dynamic

interface Vlan-interface5       和出口路由器互联地址

 ip address 10.10.10.1 255.255.255.248

interface Vlan-interface10      业务地址

 ip address 172.16.10.1 255.255.255.0