查看网线质量具体是指什么意思?
可以通过display interface GigabitEthernet 查看接口
<H3C>display interface GigabitEthernet
GigabitEthernet1/0/1
Current state: UP
Line protocol state: UP
IP packet frame type: Ethernet II, hardware address: 782c-2926-cba2
Bandwidth: 1000000 kbps
Loopback is not set
Media type is twisted pair
Port hardware type is 1000_BASE_T
1000Mbps-speed mode, full-duplex mode
Link speed type is autonegotiation, link duplex type is force link
Flow-control is not enabled
Maximum frame length: 10240
Allow jumbo frames to pass
Broadcast max-ratio: 100%
Multicast max-ratio: 100%
Unicast max-ratio: 100%
PVID: 10
MDI type: Automdix
Port link-type: Access
Tagged VLANs: None
Untagged VLANs: 10
Port priority: 0
Last link flapping: 6 weeks 2 days 2 hours 18 minutes
Last clearing of counters: Never
Peak input rate: 11465480 bytes/sec, at 2013-02-12 20:44:15
Peak output rate: 566399 bytes/sec, at 2013-02-12 20:44:15
Last 300 second input: 8 packets/sec 5420 bytes/sec 0%
Last 300 second output: 11 packets/sec 6132 bytes/sec 0%
Input (total): 104889801 packets, 148698675089 bytes
104625989 unicasts, 197059 broadcasts, 66753 multicasts, 0 pauses
Input (normal): 104889801 packets, - bytes
104625989 unicasts, 197059 broadcasts, 66753 multicasts, 0 pauses
Input: 0 input errors, 0 runts, 0 giants, 0 throttles
0 CRC, 0 frame, - overruns, 0 aborts
- ignored, - parity errors
Output (total): 55592646 packets, 11495262195 bytes
50684529 unicasts, 2875838 broadcasts, 2032279 multicasts, 0 pauses
Output (normal): 55592646 packets, - bytes
50684529 unicasts, 2875838 broadcasts, 2032279 multicasts, 0 pauses
Output: 0 output errors, - underruns, - buffer failures
0 aborts, 0 deferred, 0 collisions, 0 late collisions
0 lost carrier, - no carrier
(0)
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
抄袭了我的内容
×
原文链接或出处
诽谤我
×
对根叔社区有害的内容
×
不规范转载
×
举报说明
没有