交换机堆叠怎么配置

1.断开堆叠线

2.修改备机接口编号

3.shutdown互联接口

4.配置IRF

5.打开互联接口

6.连接堆叠线缆

配置Device A

# 根据图1-15选定IRF物理端口并关闭这些端口。

<Sysname> system-view

[Sysname] interface range ten-gigabitethernet 1/0/49 to ten-gigabitethernet 1/0/50

[Sysname-if-range] shutdown

[Sysname-if-range] quit

# 配置IRF端口1/1，并将它与物理端口Ten-GigabitEthernet1/0/49和Ten-GigabitEthernet1/0/50绑定。

[Sysname] irf-port 1/1

[Sysname-irf-port1/1] port group interface ten-gigabitethernet 1/0/49

[Sysname-irf-port1/1] port group interface ten-gigabitethernet 1/0/50

#

[Sysname] interface range ten-gigabitethernet 1/0/49 to ten-gigabitethernet 1/0/50

[Sysname-if-range] undo shutdown

[Sysname] save

# 激活IRF端口下的配置。

[Sysname] irf-port-configuration active

#

配置Device B

1、修改salve设备的ID
[Sysname]   irf member 1 renember 2 

[Sysname] save

#选定IRF物理端口并关闭这些端口。

<Sysname> system-view

[Sysname] interface range ten-gigabitethernet 2/0/49 to ten-gigabitethernet 2/0/50

[Sysname-if-range] shutdown

[Sysname-if-range] quit

# 配置IRF端口2/2，并将它与物理端口Ten-GigabitEthernet2/0/49和Ten-GigabitEthernet2/0/50绑定。

[Sysname] irf-port 2/2

[Sysname-irf-port1/1] port group interface ten-gigabitethernet 2/0/49

[Sysname-irf-port1/1] port group interface ten-gigabitethernet 2/0/50

#

[Sysname] interface range ten-gigabitethernet 2/0/49 to ten-gigabitethernet 2/0/50

[Sysname-if-range] undo shutdown

[Sysname] save

# 激活IRF端口下的配置。

[Sysname] irf-port-configuration active

#