• 全部
  • 经验案例
  • 典型配置
  • 技术公告
  • FAQ
  • 漏洞说明
  • 全部
  • 全部
  • 大数据引擎
  • 知了引擎
产品线
搜索
取消
案例类型
发布者
是否解决
是否官方
时间
搜索引擎
匹配模式
高级搜索

MSR3640对接华为AR6700,E1口非成帧模式,PPP,协议口一直down和up

6小时前提问
  • 0关注
  • 0收藏,56浏览
粉丝:0人 关注:0人

问题描述:

MSR3640对接华为AR6700,E1口非成帧模式,PPP,协议口一直down和up,是否哪个参数不对

3 个回答
zhl188 六段
粉丝:2人 关注:3人

你dis你的接口,然后华为的dis他的接口看看,如果他是成帧,你这边也成帧,总之两边一致就行。如果你不会看,贴出两边配置来。dis int ser 1/0/1

华为 [huawei-Router]display interface Serial1/0/0:0 Serial1/0/0:0 current state : UP (ifindex: 38) Line protocol current state : UP Last line protocol up time : 2025-11-17 17:41:30 Description: Route Port,The Maximum Transmit Unit is 1500, Hold timer is 10(sec) Derived from E1 1/0/0, Unframed mode, baudrate is 2048000 bps Internet Address is 10.62.28.2/30 Link layer protocol is PPP LCP opened, IPCP opened PPP negotiated peer ip address is 10.62.28.1 Current system time: 2025-11-17 17:42:16 Last 300 seconds input rate 4 bytes/sec, 0 packets/sec Last 300 seconds output rate 11 bytes/sec, 0 packets/sec Input : 41625 bytes, 1430 packets Output: 110720 bytes, 2516 packets Input: Total Error: 0, No Buffers: 0 runts: 0, Giants: 0 CRC: 0, Alignments: 0 Aborts: 0 Output: Total Error: 0, No Buffers: 0 Last 300 seconds input utility rate: 0.01% Last 300 seconds output utility rate: 0.01%

zhiliao_BOOhr4 发表时间:5小时前 更多>>

[H3C-Serial5/3]display current-configuration # version 7.1.049, Release 0106 # sysname H3C # password-recovery enable # vlan 1 # controller Cellular0/0 # controller Cellular0/1 # interface Aux0 # interface Serial5/0 fe1 unframed # interface Serial5/1 # interface Serial5/2 # interface Serial5/3 fe1 unframed ip address 10.62.28.1 255.255.255.252 # 华为配置 controller E1 1/0/0 using e1 # controller E1 1/0/1 using e1 # controller E1 1/0/2 using e1 # controller E1 1/0/3 using e1 # interface MEth0/0/0 # interface Serial1/0/0:0 link-protocol ppp ip address 10.62.28.2 255.255.255.252 #

zhiliao_BOOhr4 发表时间:6小时前

有时协议口起来了,但也是ping 丢包状态

zhiliao_BOOhr4 发表时间:6小时前

[H3C]display interface Serial 5/3 Serial5/3 Current state: UP Line protocol state: UP Description: Serial5/3 Interface Bandwidth: 2048kbps Maximum Transmit Unit: 1500 Hold timer: 10 seconds Physical layer is E1-F, baudrate is 2048000 bps fe1 unframed Internet Address is 10.62.28.1/30 Primary Link layer protocol: PPP LCP: opened, IPCP: opened Output queue - Urgent queuing: Size/Length/Discards 0/100/0 Output queue - Protocol queuing: Size/Length/Discards 0/500/0 Output queue - FIFO queuing: Size/Length/Discards 0/75/0 Last clearing of counters: Never Last 300 seconds input rate: 7.15 bytes/sec, 57 bits/sec, 0.17 packets/sec Last 300 seconds output rate: 2.45 bytes/sec, 19 bits/sec, 0.19 packets/sec Input: 12164 packets, 278426 bytes 0 broadcasts, 0 multicasts 10271 errors, 0 runts, 6 giants 8357 CRC, 0 align errors, 0 overruns 0 aborts, 0 no buffers, 1908 frame errors Output: 3058 packets, 77753 bytes 0 errors, 0 underruns, 0 collisions 0 deferred

zhiliao_BOOhr4 发表时间:6小时前

华为 [huawei-Router]display interface Serial1/0/0:0 Serial1/0/0:0 current state : UP (ifindex: 38) Line protocol current state : UP Last line protocol up time : 2025-11-17 17:41:30 Description: Route Port,The Maximum Transmit Unit is 1500, Hold timer is 10(sec) Derived from E1 1/0/0, Unframed mode, baudrate is 2048000 bps Internet Address is 10.62.28.2/30 Link layer protocol is PPP LCP opened, IPCP opened PPP negotiated peer ip address is 10.62.28.1 Current system time: 2025-11-17 17:42:16 Last 300 seconds input rate 4 bytes/sec, 0 packets/sec Last 300 seconds output rate 11 bytes/sec, 0 packets/sec Input : 41625 bytes, 1430 packets Output: 110720 bytes, 2516 packets Input: Total Error: 0, No Buffers: 0 runts: 0, Giants: 0 CRC: 0, Alignments: 0 Aborts: 0 Output: Total Error: 0, No Buffers: 0 Last 300 seconds input utility rate: 0.01% Last 300 seconds output utility rate: 0.01%

zhiliao_BOOhr4 发表时间:5小时前
zhiliao_BOOhr4 知了小白
粉丝:0人 关注:0人

[H3C-Serial5/3]display current-configuration
#
version 7.1.049, Release 0106
#
sysname H3C
#
password-recovery enable
#
vlan 1
#
controller Cellular0/0
#
controller Cellular0/1
#
interface Aux0
#
interface Serial5/0
fe1 unframed
#
interface Serial5/1
#
interface Serial5/2
#
interface Serial5/3
fe1 unframed
ip address 10.62.28.1 255.255.255.252
#


华为配置
controller E1 1/0/0
using e1
#
controller E1 1/0/1
using e1
#
controller E1 1/0/2
using e1
#
controller E1 1/0/3
using e1
#
interface MEth0/0/0
#
interface Serial1/0/0:0
link-protocol ppp
ip address 10.62.28.2 255.255.255.252
#

有时协议口起来了,但也是ping 丢包状态

军刺 三段
粉丝:3人 关注:0人

故障现象根因解决方案
物理层反复 Up/Down时钟模式冲突(两端主时钟)一端设为 master(internal),一端设为 slave(external)
物理层 Down,LOS 告警线缆类型不匹配(75Ω vs 120Ω)更换对应阻抗的 E1 线缆
PPP 协议层反复 Up/Down认证方式不匹配两端均关闭认证,或统一配置 PAP/CHAP 参数
LCP 协商超时回声检测导致协商失败两端均执行 undo ppp lcp echo

编辑答案

你正在编辑答案

如果你要对问题或其他回答进行点评或询问,请使用评论功能。

分享扩散:

提出建议

    +

亲~登录后才可以操作哦!

确定

亲~检测到您登陆的账号未在http://hclhub.h3c.com进行注册

注册后可访问此模块

跳转hclhub

你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作

举报

×

侵犯我的权益 >
对根叔社区有害的内容 >
辱骂、歧视、挑衅等(不友善)

侵犯我的权益

×

泄露了我的隐私 >
侵犯了我企业的权益 >
抄袭了我的内容 >
诽谤我 >
辱骂、歧视、挑衅等(不友善)
骚扰我

泄露了我的隐私

×

您好,当您发现根叔知了上有泄漏您隐私的内容时,您可以向根叔知了进行举报。 请您把以下内容通过邮件发送到pub.zhiliao@h3c.com 邮箱,我们会尽快处理。
  • 1. 您认为哪些内容泄露了您的隐私?(请在邮件中列出您举报的内容、链接地址,并给出简短的说明)
  • 2. 您是谁?(身份证明材料,可以是身份证或护照等证件)

侵犯了我企业的权益

×

您好,当您发现根叔知了上有关于您企业的造谣与诽谤、商业侵权等内容时,您可以向根叔知了进行举报。 请您把以下内容通过邮件发送到 pub.zhiliao@h3c.com 邮箱,我们会在审核后尽快给您答复。
  • 1. 您举报的内容是什么?(请在邮件中列出您举报的内容和链接地址)
  • 2. 您是谁?(身份证明材料,可以是身份证或护照等证件)
  • 3. 是哪家企业?(营业执照,单位登记证明等证件)
  • 4. 您与该企业的关系是?(您是企业法人或被授权人,需提供企业委托授权书)
我们认为知名企业应该坦然接受公众讨论,对于答案中不准确的部分,我们欢迎您以正式或非正式身份在根叔知了上进行澄清。

抄袭了我的内容

×

原文链接或出处

诽谤我

×

您好,当您发现根叔知了上有诽谤您的内容时,您可以向根叔知了进行举报。 请您把以下内容通过邮件发送到pub.zhiliao@h3c.com 邮箱,我们会尽快处理。
  • 1. 您举报的内容以及侵犯了您什么权益?(请在邮件中列出您举报的内容、链接地址,并给出简短的说明)
  • 2. 您是谁?(身份证明材料,可以是身份证或护照等证件)
我们认为知名企业应该坦然接受公众讨论,对于答案中不准确的部分,我们欢迎您以正式或非正式身份在根叔知了上进行澄清。

对根叔社区有害的内容

×

垃圾广告信息
色情、暴力、血腥等违反法律法规的内容
政治敏感
不规范转载 >
辱骂、歧视、挑衅等(不友善)
骚扰我
诱导投票

不规范转载

×

举报说明