MSG 360 -10升级过程断电导致flansh损坏了

找款tftp软件，用软件来上传版本，

1，重启设备，当出现Press Ctrl+B to access EXTENDED-BOOTWARE MENU...”时，键入<Ctrl+B>，系统进入BootWare主菜单：  

|<1> Boot System                                                           |

|<2> Enter Serial SubMenu                                                  |

|<3> Enter Ethernet SubMenu                                                |

|<4> File Control                                                          |

|<5> Restore to Factory Default Configuration                              |

|<6> Skip Current System Configuration                                     |

|<7> BootWare Operation Menu                                               |

|<8> Skip Authentication for Console Login                                 |

|<9> Storage Device Operation                                              |

|<0> Reboot            

选择3，|<3> Enter Ethernet SubMenu  

2. 进入以太网口子菜单

在BootWare主菜单下键入<3>，可以进入以太网口子菜单，系统显示如下：

==========================<Enter Ethernet SubMenu>==========================   

|Note:the operating device is flash                                        |   

|<1> Download Image Program To SDRAM And Run                               |   

|<2> Update Main Image File                                                |   

|<3> Update Backup Image File                                              |   

|<4> Download Files(*.*)                                                   |   

|<5> Modify Ethernet Parameter                                             |   

|<0> Exit To Main Menu                                                     |   

|<Ensure The Parameter Be Modified Before Downloading!>                    |   

============================================================================   

Enter your choice(0-5):

3. 修改以太网口参数

在以太网口子菜单下键入<5>，可以修改以太口参数，系统显示如下：

==========================<ETHERNET PARAMETER SET>==========================   

|Note:       '.' = Clear field.                                            |   

|            '-' = Go to previous field.                                   |   

|         Ctrl+D = Quit.                                                   |   

============================================================================   

Protocol (FTP or TFTP) :tftp                                                   

Load File Name           :xxx.ipe                                            

                         :                                                     

Target File Name         :xxx.ipe                                           

                         :                                                     

Server IP Address        :192.168.100.12                                       

Local IP Address         :192.168.100.142                                      

Subnet Mask              :0.0.0.0                                               

Gateway IP Address       :0.0.0.0

4. 进行版本下载

以升级主启动文件为例，键入<2>升级主启动文件：

Loading.....................................................................

..........................................................................

下载完后，返回主界面，重启设备