无线AP一直闪灯

是AC的配置？

是的，除非做本地转发了，否则看AP配置没啥东西

<wuxiankongzhiqi>dis cu # version 5.20, Release 3308P18 # sysname wuxiankongzhiqi # domain default enable system # telnet server enable # port-security enable # oap management-ip 192.168.0.101 slot 0 # wlan auto-ap enable # password-recovery enable # vlan 1 # domain system access-limit disable state active idle-cut disable self-service-url disable # user-group system group-attribute allow-guest # local-user admin password cipher $c$3$nmBMe/uKDpkC4Xtv6LT2J3/1dyLYc5D+ authorization-attribute level 3 service-type telnet local-user admin123 password cipher $c$3$5MkQPApb8aiEWkYdIh0nhEkxYtctq8k5Y7Cc authorization-attribute level 3 service-type telnet # wlan rrm dot11a mandatory-rate 6 12 24 dot11a supported-rate 9 18 36 48 54 dot11b mandatory-rate 1 2 dot11b supported-rate 5.5 11 dot11g mandatory-rate 1 2 5.5 11 dot11g supported-rate 6 9 12 18 24 36 48 54 # wlan service-template 11 crypto ssid cfst-wifi bind WLAN-ESS 1 authentication-method shared-key cipher-suite wep40 wep default-key 1 wep40 pass-phrase cipher $c$3$UoAfqHHOkHyHJ4OkB2HcgGGYAp63i/3S service-template enable # interface Bridge-Aggregation1 # interface NULL0 # interface Vlan-interface1 ip address 192.168.0.100 255.255.255.0 # interface GigabitEthernet1/0/1 port link-aggregation group 1 # interface GigabitEthernet1/0/2 port link-aggregation group 1 # interface WLAN-ESS1 # interface WLAN-ESS11 # wlan ap autoap_0009 model WA2610i-GN id 3 serial-id 219801A0CLC13A000289 radio 1 channel 6 service-template 11 radio enable # wlan ap autoap_0010 model WA2610i-GN id 4 serial-id 219801A0CLC13A000296 radio 1 channel 1 service-template 11 radio enable # wlan ap autoap_0011 model WA2610i-GN id 5 serial-id 219801A0CLC13A000305 radio 1 channel 11 service-template 11 radio enable # wlan ap autoap_0012 model WA2610i-GN id 6 serial-id 219801A0CLC13A000306 radio 1 channel 1 service-template 11 radio enable # wlan ap aytoap_0015 model WA2620i-AGN id 7 serial-id 219801A0CNC138018605 radio 1 service-template 11 radio enable radio 2 service-template 11 radio enable # dhcp server forbidden-ip 192.168.0.1 dhcp server forbidden-ip 192.168.0.100 dhcp server forbidden-ip 192.168.0.101 dhcp server forbidden-ip 192.168.0.254 # load xml-configuration # user-interface con 0 user-interface vty 0 4 authentication-mode scheme user privilege level 3 # return <wuxiankongzhiqi>

我发出来，麻烦您帮忙看一下，谢谢

dis wlan all，AP是什么状态

[wuxiankongzhiqi]dis wlan ap all Total Number of APs configured : 5 Total Number of configured APs connected : 0 Total Number of auto APs connected : 0 AP Profiles State : I = Idle, J = Join, JA = JoinAck, IL = ImageLoad C = Config, R = Run, KU = KeyUpdate, KC = KeyCfm -------------------------------------------------------------------------------- AP Name State Model Serial-ID -------------------------------------------------------------------------------- autoap_0009 I WA2610i-GN 219801A0CLC13A000289 autoap_0010 I WA2610i-GN 219801A0CLC13A000296 autoap_0011 I WA2610i-GN 219801A0CLC13A000305 autoap_0012 I WA2610i-GN 219801A0CLC13A000306 aytoap_0015 I WA2620i-AGN 219801A0CNC138018605 ------------------------------------------------------------------------------- [wuxiankongzhiqi]

能否帮忙看下