S5016P 恢复出厂设置问题

V5平台交换机下console口配置密码，忘记设置密码之后需要进入设备botroom菜单选择跳过配置文件启动设备。

需求1：需要之前的配置文件，客户重新进入交换机后下载配置文件。

配置过程：

******************************************************************************

* Copyright (c) 2004-2015 Hangzhou H3C Tech. Co., Ltd. All rights reserved.  *

* Without the owner&＃39;s prior written consent,                                 *

* no decompiling or reverse-engineering shall be allowed.                    *

******************************************************************************

User interface aux0 is available.

Please press ENTER.

Login authentication

Password:

 %Username or password is invalid.

Password:

忘记console口用户名和密码时，重启设备进入botroom菜单。

System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU
Booting Normal Extend BootWare
The Extend BootWare is self-decompressing.......................Done!

****************************************************************************
*                                                                          *
*                H3C S3110-26TP-SI BootWare, Version 1.10                  *
*                                                                          *
****************************************************************************
Copyright (c) 2004-2014 Hangzhou H3C Technologies Co., Ltd.

Compiled Date       : Jun  5 2014 11:34:07
CPU Type            : MIPS4kec
CPU L1 Cache        : 16KB
CPU Clock Speed     : 500MHz
Memory Type         : DDR3 SDRAM
Memory Size         : 128MB
Memory Speed        : 300MHz
BootWare Size       : 3MB
Flash Size          : 32MB

BootWare Validating...
Press Ctrl+B to enter extended boot menu...按Ctrl+B进入botroom菜单

BotWare password: Not required. Please press Enter to continue.

Password recovery capability is enabled.

Note: The current operating device is flash

Enter < Storage Device Operation > to select device.

===========================<EXTEND-BOOTWARE MENU>===========================

|<1> Boot System                                                           |

|<2> Enter Serial SubMenu                                                  |

|<3> Enter Ethernet SubMenu                                                |

|<4> File Control                                                          |

|<5> Restore to Factory Default Configuration                              |

|<6> Skip Current System Configuration                                     |

|<7> BootWare Operation Menu                                               |

|<8> Clear Super Password                                                  |

|<9> Storage Device Operation                                              |

|<0> Reboot                                                                |

============================================================================

Ctrl+Z: Access EXTEND-ASSISTANT MENU

Ctrl+F: Format File System

Enter your choice(0-9): 6   选择6 跳过配置文件

Flag Set Success.

===========================<EXTEND-BOOTWARE MENU>===========================

|<1> Boot System                                                           |

|<2> Enter Serial SubMenu                                                  |

|<3> Enter Ethernet SubMenu                                                |

|<4> File Control                                                          |

|<5> Restore to Factory Default Configuration                              |

|<6> Skip Current System Configuration                                     |

|<7> BootWare Operation Menu                                               |

|<8> Clear Super Password                                                  |

|<9> Storage Device Operation                                              |

|<0> Reboot                                                                |

============================================================================

Ctrl+Z: Access EXTEND-ASSISTANT MENU

Ctrl+F: Format File System

Enter your choice(0-9): 0  选择0重启设备

System is starting...

Press Ctrl+D to access BASIC-BOOTWARE MENU

Booting Normal Extend BootWare

The Extend BootWare is self-decompressing.......................Done!

****************************************************************************

*                                                                          *

*                H3C S3110-26TP-SI BootWare, Version 1.10                  *

*                                                                          *

****************************************************************************

Copyright (c) 2004-2014 Hangzhou H3C Technologies Co., Ltd.

Compiled Date       : Jun  5 2014 11:34:07

CPU Type            : MIPS4kec

CPU L1 Cache        : 16KB

CPU Clock Speed     : 500MHz

Memory Type         : DDR3 SDRAM

Memory Size         : 128MB

Memory Speed        : 300MHz

BootWare Size       : 3MB

Flash Size          : 32MB

BootWare Validating...

Press Ctrl+B to enter extended boot menu...

Starting to get the main application

file--flash:/S3110_26TP_SI-CMW520-R1104.bin!................................

...............................................................

The main application file is self-decompressing.............................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

...........................................................Done!

System application is starting...

Configuration file is skipped.

User interface aux0 is available.

Press ENTER to get started.

<H3C>

#Apr 26 12:02:07:166 2000 H3C SHELL/4/LOGIN:

 Trap 1.3.6.1.4.1.25506.2.2.1.1.3.0.1<hh3cLogIn>: login from Console

%Apr 26 12:02:07:306 2000 H3C SHELL/5/SHELL_LOGIN: Console logged in from aux0.

<H3C>

<H3C>dir  ----查看设备配置文件

Directory of flash:/

   0     -rw-  12511232  Aug 08 2008 20:00:00   s3110_26tp_si-cmw520-r1104.bin

   1     drw-         -  Apr 26 2000 12:00:20   logfile

   2     -rw-      1666  Apr 26 2000 12:05:39   startup.cfg

   3     -rw-      1556  Apr 26 2000 12:05:33   _startup_bak.cfg

   4     -rw-       151  Apr 26 2000 12:05:30   system.xml

29106 KB total (16876 KB free) 

给交换机和电脑配置成同网段IP地址（举例：交换机配置成192.168.100.1，电脑配置成192.168.100.2），在电脑上通过3CD软件搭建tftp服务器。

<H3C>sys

System View: return to User View with Ctrl+Z.

[H3C]interface Vlan-interface 1

[H3C-Vlan-interface1]ip address 192.168.100.1 24

[H3C-Vlan-interface1]quit

[H3C]ping 192.168.100.2

  PING 192.168.100.2: 56  data bytes, press CTRL_C to break

    Reply from 192.168.100.2: bytes=56 Sequence=1 ttl=128 time=7 ms

    Reply from 192.168.100.2: bytes=56 Sequence=2 ttl=128 time=2 ms

    Reply from 192.168.100.2: bytes=56 Sequence=3 ttl=128 time=2 ms

    Reply from 192.168.100.2: bytes=56 Sequence=4 ttl=128 time=2 ms

    Reply from 192.168.100.2: bytes=56 Sequence=5 ttl=128 time=2 ms

  --- 192.168.100.2 ping statistics ---

    5 packet(s) transmitted

    5 packet(s) received

    0.00% packet loss

    round-trip min/avg/max = 2/3/7 ms

[H3C]

<H3C>tftp 192.168.100.2 put startup.cfg
 
  File will be transferred in binary mode
  Sending file to remote TFTP server. Please wait... |
  TFTP:     1666 bytes sent in 0 second(s).
  File uploaded successfully.

<H3C> 

下载成功：

可以到本地相关路径查看到相关文件。

需求2：直接恢复出厂设置，不需要之前的配置文件

操作步骤：跳过启动文件后直接保存当前配置即可。