2620i-agn能否升级到v7？
- 0关注
- 1收藏，1030浏览
问题描述：
2620i-agn能否升级到v7？我使用的是wx2540h无线控制器，控制器版本是v7，我在配置里发现控制器是支持这个ap的，现在到哪儿能弄到ap升级包，官网找不到了。
- 2020-08-27提问
- 举报
-
(0)
最佳答案
您好，请知：
以下是WA2620i-agn的下载连接，官网只有V5的，应该还不支持升级到V7。
下载连接如下：
用户名：yx800
密码：01230123
注意查看软件版本说明书。
- 2020-08-27回答
- 评论(0)
- 举报
-
(0)
首先直接接入网络，看下AP是否可以自动升级到V7.如果没办法自动升级，可以按照以下方法，手动升级到V7，然后再上线。
***************************************************************************
* *
* H3C WA4320i-ACN BootWare, Version 1.15 *
* *
****************************************************************************
Copyright (c) 2004-2017 New H3C Technologies Co., Ltd.
Compiled Date : Mar 27 2017
CPU Type : ATHEROS AR9550
CPU L1 Cache : 32KB
CPU Clock Speed : 720MHz
Memory Type : SDRAM
Memory Size : 256MB
Memory Speed : 560MHz
BootWare Size : 512KB
Flash Size : 32MB
CPLD Version : 002
PCB Version : Ver.C
BootWare Validating...
Press Ctrl+B to enter extended boot menu...
BootWare password: Not required. Please press Enter to continue.
Password recovery capability is enabled.
Note: The current operating device is flash
Enter < Storage Device Operation > to select device.
===========================<EXTEND-BOOTWARE MENU>===========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Clear Super Password |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+C: Display Copyright
Ctrl+Y: Change AP Mode
Ctrl+F: Format File System
Enter your choice(0-9): 3
==========================<Enter Ethernet SubMenu>==========================
|Note:the operating device is flash |
|<1> Download Application Program To SDRAM And Run |
|<2> Update Main Application File |
|<3> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|<Ensure The Parameter Be Modified Before Downloading!> |
============================================================================
Enter your choice(0-3): 3
==========================<ETHERNET PARAMETER SET>==========================
|Note: &＃39;.&＃39; = Clear field. |
| &＃39;-&＃39; = Go to previous field. |
| Ctrl+D = Quit. |
============================================================================
Protocol (FTP or TFTP) :ftp tftp
Load File Name :wa4300_fat.bin
:wa4300.ipe
Target File Name :wa4300_fat.bin
:wa4300.ipe
Server IP Address :192.168.1.1 100.0.0.2
Local IP Address :192.168.1.50 100.0.0.1
Gateway IP Address :0.0.0.0
==========================<Enter Ethernet SubMenu>==========================
|Note:the operating device is flash |
|<1> Download Application Program To SDRAM And Run |
|<2> Update Main Application File |
|<3> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|<Ensure The Parameter Be Modified Before Downloading!> |
============================================================================
Enter your choice(0-3): 2
Loading.....................................................................
............................................................................
............................................................................
............................................................................
.............................Done!
16546816 bytes downloaded!
Something wrong with the file.
通过搜集过来的两台AP输出信息来看，成功升级AP的bootware版本为“Version 7.07”，这个是V7的bootware版本。升级失败的bootware版本为“Version 1.15”，这个是V5的bootware版本。所以导致这个问题的原因就是：V5的bootware无法识别V7的ipe版本文件。
首先将V5 AP的bootware升级至V7的bootware，然后格式化flash后再将AP版本升级至V7。
操作之前，先准备好wa4300_update.bin（用来升级bootware）和wa4300.ipe（V7软件版本）。AP的版本在V7的控制器上查看和下载，查看的命令：<ACV7>dir cfa0:/apimge/
具体操作过程如下：（以WA4320i-ACN为例）
第一步：进入V5 AP的bootware，并且按Ctrl+F格式化
Copyright (c) 2004-2017 New H3C Technologies Co., Ltd.
Compiled Date : Mar 27 2017
CPU Type : ATHEROS AR9550
CPU L1 Cache : 32KB
CPU Clock Speed : 720MHz
Memory Type : SDRAM
Memory Size : 256MB
Memory Speed : 560MHz
BootWare Size : 512KB
Flash Size : 32MB
CPLD Version : 002
PCB Version : Ver.C
BootWare Validating...
Press Ctrl+B to enter extended boot menu...
BootWare password: Not required. Please press Enter to continue.
Password recovery capability is enabled.
Note: The current operating device is flash
Enter < Storage Device Operation > to select device.
===========================<EXTEND-BOOTWARE MENU>===========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Clear Super Password |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+C: Display Copyright
Ctrl+Y: Change AP Mode
Ctrl+F: Format File System
Enter your choice(0-9):
Warning:All files on flash will be lost! Are you sure to format? [Y/N]Y.....
............................................................................
..................
Format success.
第二步：进入V5 AP的bootware下，通过网口传入wa4300_update.bin文件，提示
更新bootware版本的时候选择Y
==========================<Enter Ethernet SubMenu>==========================
|Note:the operating device is flash |
|<1> Download Application Program To SDRAM And Run |
|<2> Update Main Application File |
|<3> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|<Ensure The Parameter Be Modified Before Downloading!> |
============================================================================
Enter your choice(0-3): 3
==========================<ETHERNET PARAMETER SET>==========================
|Note: &＃39;.&＃39; = Clear field. |
| &＃39;-&＃39; = Go to previous field. |
| Ctrl+D = Quit. |
============================================================================
Protocol (FTP or TFTP) :tftp tftp
Load File Name :wa4300.ipe.ipe
:wa4300_update.bin
Target File Name :wa4300.ipe.ipe
:wa4300_update.bin
Server IP Address :100.0.0.2 100.0.0.2
Local IP Address :100.0.0.1 100.0.0.1
Gateway IP Address :0.0.0.0
==========================<Enter Ethernet SubMenu>==========================
|Note:the operating device is flash |
|<1> Download Application Program To SDRAM And Run |
|<2> Update Main Application File |
|<3> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|<Ensure The Parameter Be Modified Before Downloading!> |
============================================================================
Enter your choice(0-3): 1
Loading.....................................................................
............................................................................
............................................................................
............................................................................
.......................Done!
16260096 bytes downloaded!
Extend BootWare Version is not equal,updating? [Y/N]
Updating Extend BootWare...........Done!
BootWare updated,System is rebooting now.
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU
Booting Normal Extend BootWare
The Extend BootWare is self-decompressing...................................
........Done!
The system have been updated to ComwareV7.
第三步：再次Crtl+F格式化AP flash
格式化步骤如上，不在赘述。
第四步：导入V7 AP版本（wa4300.ipe）
==========================<EXTENDED-BOOTWARE MENU>==========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Skip Authentication for Console Login |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format File System
Ctrl+C: Display Copyright
Enter your choice(0-9): 3
==========================<Enter Ethernet SubMenu>==========================
|Note:the operating device is flash |
|<1> Download Image Program To SDRAM And Run |
|<2> Update Main Image File |
|<3> Update Backup Image File |
|<4> Download Files(*.*) |
|<5> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|<Ensure The Parameter Be Modified Before Downloading!> |
============================================================================
Enter your choice(0-5): 5
==========================<ETHERNET PARAMETER SET>==========================
|Note: &＃39;.&＃39; = Clear field. |
| &＃39;-&＃39; = Go to previous field. |
| Ctrl+D = Quit. |
============================================================================
Protocol (FTP or TFTP) :tftp tftp
Load File Name :WA4300_FAT.bin
:wa4300.ipe
Target File Name :WA4300_FAT.bin
:wa4300.ipe
Server IP Address :10.0.0.2 100.0.0.2
Local IP Address :10.0.0.1 100.0.0.1
Subnet Mask :255.255.255.0
Gateway IP Address :0.0.0.0
==========================<Enter Ethernet SubMenu>==========================
|Note:the operating device is flash |
|<1> Download Image Program To SDRAM And Run |
|<2> Update Main Image File |
|<3> Update Backup Image File |
|<4> Download Files(*.*) |
|<5> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|<Ensure The Parameter Be Modified Before Downloading!> |
============================================================================
Enter your choice(0-5): 2
Loading.....................................................................
............................................................................
............................................................................
............................................................................
.............................Done.
16546816 bytes downloaded!
Image file wa4300-boot.bin is self-decompressing...
Saving file flash:/wa4300-boot.bin ........................................
Done.
Image file wa4300-system.bin is self-decompressing...
Saving file flash:/wa4300-system.bin .......................................
............................................................................
............................................................................
...........................Done.
第五步：重启，升级完成
<H3C>display version
H3C Comware Software, Version 7.1.064, Release 2215P01
Copyright (c) 2004-2017 New H3C Technologies Co., Ltd. All rights reserved.
H3C WA4320i-ACN uptime is 0 weeks, 0 days, 0 hours, 1 minute
V5 AP手工导入版本升级至V7时，由于V5的bootware无法正确识别V7的ipe版本文件，只能够识别.bin文件。所以需要先导入wa4300_update.bin将AP的bootware升级至V7，然后再导入ipe文件。
- 2020-08-27回答
- 评论(0)
- 举报
-
(0)
暂无评论
编辑答案
亲~登录后才可以操作哦!
确定你的邮箱还未认证，请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
- 1. 您举报的内容是什么？（请在邮件中列出您举报的内容和链接地址）
- 2. 您是谁？（身份证明材料，可以是身份证或护照等证件）
- 3. 是哪家企业？（营业执照，单位登记证明等证件）
- 4. 您与该企业的关系是？（您是企业法人或被授权人，需提供企业委托授权书）
抄袭了我的内容
×
原文链接或出处
诽谤我
×
- 1. 您举报的内容以及侵犯了您什么权益？（请在邮件中列出您举报的内容、链接地址，并给出简短的说明）
- 2. 您是谁？（身份证明材料，可以是身份证或护照等证件）
对根叔社区有害的内容
×
不规范转载
×
举报说明
暂无评论