s5130-28s-ei con口密码忘记

1. BootWare主菜单

交换机上电和重新启动的过程中，在配置终端的屏幕上首先将显示：

RAM test successful.

Press Ctrl+T to start five-step full RAM test...

Press Ctrl+Y to start nine-step full RAM test...

System is starting...

Press Ctrl+D to access BASIC-BOOTWARE MENU...

Booting Normal Extended BootWare

The Extended BootWare is self-decompressing.........Done.

****************************************************************************

*                                                                          *

*                         BootWare, Version 1.03                           *

*                                                                          *

****************************************************************************

Compiled Date       : Jul 19 2014

CPU Type            : XLP208 Rev A2

CPU Clock Speed     : 1000MHz

Memory Type         : DDR3 SDRAM

Memory Size         : 8192MB

Memory Speed        : 667MHz

BootWare Size       : 1536KB

Flash Size          : 4MB

BootWare Validating...

Press Ctrl+B to access EXTENDED-BOOTWARE MENU...

当出现“Press Ctrl+B to enter extended boot menu...”时，键入<Ctrl+B>，系统进入BootWare主菜单：

Password recovery capability is enabled.

Note: The current operating device is flash

Enter < Storage Device Operation > to select device.

==========================<EXTENDED-BOOTWARE MENU>==========================

|<1> Boot System                                                           |

|<2> Enter Serial SubMenu                                                  |

|<3> Enter Ethernet SubMenu                                                |

|<4> File Control                                                          |

|<5> Restore to Factory Default Configuration                              |

|<6> Skip Current System Configuration                                     |

|<7> BootWare Operation Menu                                               |

|<8> Skip Authentication for Console Login                                 |

|<9> Storage Device Operation                                              |

|<0> Reboot                                                                |

============================================================================

Ctrl+Z: Access EXTENDED ASSISTANT MENU

Ctrl+F: Format File System

Enter your choice(0-9):

该菜单含义如下：

表8 BootWare菜单项解释

重启跳过console密码：

1、借助配置线用超级终端连接设备。参考网址：https://zhiliao.h3c.com/theme/details/46988

2、重启设备，当看到命令行中显示的字符有“CTRL+B”时，按住CRTL+B，并再按一下回车键，会进入BootROM。  注：如果怕错过按CRTL+B，可重启后一直重复按CTRL+B

3、进入BootROM会显示如下，选择9，跳过Console认识

4、选择1，回车   启动系统，进入系统后是无console密码的

<H3C>sys

[H3C]user-interface console 0       #进入console视图下

[H3C-ui-console0]set authentication password simple 123456     #设置密码为123456

[H3C-ui-console0] sa f      #保存当前配置

这样你也不用重置，原始的配置都是在的，只是你的console密码就是123456