WA4320-ACN-E如何刷成胖AP

3.AP上电后，在crt中按ctrl+B进入到bootrom菜单

===========================<EXTEND-BOOTWARE MENU>===========================

|<1> Boot System                                                           |

|<2> Enter Serial SubMenu                                                  |

|<3> Enter Ethernet SubMenu                                                |

|<4> File Control                                                          |

|<5> Restore to Factory Default Configuration                              |

|<6> Skip Current System Configuration                                     |

|<7> BootWare Operation Menu                                               |

|<8> Clear Super Password                                                  |

|<9> Storage Device Operation                                              |

|<0> Reboot                                                                |

============================================================================

Ctrl+C: Display Copyright

Ctrl+Y: Change AP Mode

Ctrl+F: Format File System

Enter your choice(0-9): 3

==========================<Enter Ethernet SubMenu>==========================

|Note:the operating device is flash                                        |

|<1> Download Application Program To SDRAM And Run                         |

|<2> Update Main Application File                                          |

|<3> Modify Ethernet Parameter                                             |

|<0> Exit To Main Menu                                                     |

|<Ensure The Parameter Be Modified Before Downloading!>                    |

============================================================================

Enter your choice(0-3): 3       //修改以太网参数,有可能选5，请根据实际情况选择

==========================<ETHERNET PARAMETER SET>==========================

|Note:       '.' = Clear field.                                            |

|            '-' = Go to previous field.                                   |

|          Ctrl+D = Quit.                                                  |

============================================================================

Protocol (FTP or TFTP) :tftp tftp    //不管看到什么输入tftp

Load File Name         :wa4300s_fat.bin

                      : wa4300_fat.bin    //输入更改过后的文件名字

Target File Name       :wa4300s_fat.bin

                      : wa4300_fat.bin

Server IP Address      :192.168.0.1 192.168.0.1     //PC的ip地址，这个ip只是举例

Local IP Address       :192.168.0.50 192.168.0.50   //指定AP的ip和PC同一网段

Gateway IP Address     :0.0.0.0

==========================<Enter Ethernet SubMenu>==========================

|Note:the operating device is flash                                        |

|<1> Download Application Program To SDRAM And Run                         |

|<2> Update Main Application File                                          |

|<3> Modify Ethernet Parameter                                             |

|<0> Exit To Main Menu                                                     |

|<Ensure The Parameter Be Modified Before Downloading!>                    |

============================================================================

Enter your choice(0-3): 1

Loading.....................................................................

............................................................................

............................................................................

..Done!

11293696 bytes downloaded!

Updating File flash:/wa4300s_fat.bin........................................

............................................................................

...........................................................Done!      //上传完成

上传完成后设备会再次重启

===========================<EXTEND-BOOTWARE MENU>===========================

|<1> Boot System                                                           |

|<2> Enter Serial SubMenu                                                  |

|<3> Enter Ethernet SubMenu                                                |

|<4> File Control                                                          |

|<5> Restore to Factory Default Configuration                              |

|<6> Skip Current System Configuration                                     |

|<7> BootWare Operation Menu                                               |

|<8> Clear Super Password                                                  |

|<9> Storage Device Operation                                              |

|<0> Reboot                                                                |

============================================================================

Ctrl+C: Display Copyright

Ctrl+Y: Change AP Mode

Ctrl+F: Format File System

为防止AP空间不够，选择Ctrl+F再格式化一次。格式化之后：

===========================<EXTEND-BOOTWARE MENU>===========================

|<1> Boot System                                                           |

|<2> Enter Serial SubMenu                                                  |

|<3> Enter Ethernet SubMenu                                                |

|<4> File Control                                                          |

|<5> Restore to Factory Default Configuration                              |

|<6> Skip Current System Configuration                                     |

|<7> BootWare Operation Menu                                               |

|<8> Clear Super Password                                                  |

|<9> Storage Device Operation                                              |

|<0> Reboot                                                                |

============================================================================

Ctrl+C: Display Copyright

Ctrl+Y: Change AP Mode

Ctrl+F: Format File System

Enter your choice(0-9): 3

==========================<Enter Ethernet SubMenu>==========================

|Note:the operating device is flash                                        |

|<1> Download Application Program To SDRAM And Run                         |

|<2> Update Main Application File                                          |

|<3> Modify Ethernet Parameter                                             |

|<0> Exit To Main Menu                                                     |

|<Ensure The Parameter Be Modified Before Downloading!>                    |

============================================================================

Enter your choice(0-3): 3       //修改以太网参数,有可能选5，请根据实际情况选择

==========================<ETHERNET PARAMETER SET>==========================

|Note:       '.' = Clear field.                                            |

|            '-' = Go to previous field.                                   |

|          Ctrl+D = Quit.                                                  |

============================================================================

Protocol (FTP or TFTP) :tftp tftp    //不管看到什么输入tftp

Load File Name         :wa4300s_fat.bin

                      : wa4300_fat.bin    //输入更改过后的文件名字

Target File Name       :wa4300s_fat.bin

                      : wa4300_fat.bin

Server IP Address      :192.168.0.1 192.168.0.1     //PC的ip地址，这个ip只是举例

Local IP Address       :192.168.0.50 192.168.0.50   //指定AP的ip和PC同一网段

Gateway IP Address     :0.0.0.0

==========================<Enter Ethernet SubMenu>==========================

|Note:the operating device is flash                                        |

|<1> Download Application Program To SDRAM And Run                         |

|<2> Update Main Application File                                          |

|<3> Modify Ethernet Parameter                                             |

|<0> Exit To Main Menu                                                     |

|<Ensure The Parameter Be Modified Before Downloading!>                    |

============================================================================

Enter your choice(0-3): 2

Loading.....................................................................

............................................................................

............................................................................

..Done!

11293696 bytes downloaded!

Updating File flash:/wa4300s_fat.bin........................................

............................................................................

...........................................................Done!      //上传完成

==========================<Enter Ethernet SubMenu>==========================

|Note:the operating device is flash                                        |

|<1> Download Application Program To SDRAM And Run                         |

|<2> Update Main Application File                                          |

|<3> Modify Ethernet Parameter                                             |

|<0> Exit To Main Menu                                                     |

|<Ensure The Parameter Be Modified Before Downloading!>                    |

============================================================================

Enter your choice(0-3): 0      //回到主菜单

===========================<EXTEND-BOOTWARE MENU>===========================

|<1> Boot System                                                           |

|<2> Enter Serial SubMenu                                                  |

|<3> Enter Ethernet SubMenu                                                |

|<4> File Control                                                          |

|<5> Restore to Factory Default Configuration                              |

|<6> Skip Current System Configuration                                     |

|<7> BootWare Operation Menu                                               |

|<8> Clear Super Password                                                  |

|<9> Storage Device Operation                                              |

|<0> Reboot                                                                |

============================================================================

Ctrl+C: Display Copyright

Ctrl+Y: Change AP Mode

Ctrl+F: Format File System

Enter your choice(0-9): 4       //输入4查看文件

===============================<File CONTROL>===============================

|Note:the operating device is flash                                        |

|<1> Display All File(s)                                                   |

|<2> Set Application File type                                             |

|<3> Delete File                                                           |

|<0> Exit To Main Menu                                                     |

============================================================================

Enter your choice(0-3): 1       //输入1查看所有文件

Display all file(s) in flash:

 'M' = MAIN      'B' = BACKUP      'S' = SECURE      'N/A' = NOT ASSIGNED

============================================================================

|NO. Size(B)   Time                 Type   Name                            |

|1   388       Jan/01/2009 00:09:07 N/A    private-data.txt                |

|2   1418      Jan/01/2009 00:09:10 N/A    startup.cfg                     |

|3   294       Jan/01/2009 00:09:08 N/A    system.xml                      |

|4   11293696  Aug/08/2008 20:00:00 M      wa4300s_fat.bin  //ap的版本           

============================================================================

===============================<File CONTROL>===============================

|Note:the operating device is flash                                        |

|<1> Display All File(s)                                                   |

|<2> Set Application File type                                             |

|<3> Delete File                                                           |

|<0> Exit To Main Menu                                                     |

============================================================================

Enter your choice(0-3): 0    //按0返回主菜单

===========================<EXTEND-BOOTWARE MENU>===========================

|<1> Boot System                                                           |

|<2> Enter Serial SubMenu                                                  |

|<3> Enter Ethernet SubMenu                                                |

|<4> File Control                                                          |

|<5> Restore to Factory Default Configuration                              |

|<6> Skip Current System Configuration                                     |

|<7> BootWare Operation Menu                                               |

|<8> Clear Super Password                                                  |

|<9> Storage Device Operation                                              |

|<0> Reboot                                                                |

============================================================================

Ctrl+C: Display Copyright

Ctrl+Y: Change AP Mode

Ctrl+F: Format File System

Enter your choice(0-9): 1       //输入1引导系统文件

System is starting...

Press Ctrl+D to access BASIC-BOOTWARE MENU

Booting Normal Extend BootWare

The Extend BootWare is self-decompressing.............................Done!

<WAP712C>dir         //查看所有文件，切为胖版本完成

Directory of flash:/

   0     -rw-      1418  Jan 01 2009 00:09:10   startup.cfg

   1     -rw-       294  Jan 01 2009 00:09:08   system.xml

   2     -rw-  11293696  Aug 08 2008 20:00:00   wa4300_fat.bin

15057 KB total (4021 KB free)