问

MIB库

2022-01-01提问

0关注
1收藏，1361浏览

zhiliao_pSTYi

zhiliao_pSTYi 零段

粉丝：0人关注：0人

问题描述：

设置列表

有序列表
无序列表

想问一下，

1: sysDescr.0 H3C Comware Platform Software, Software Version 7.1.059, Release 0305P04 H3C MSR56-60 Copyright (c) 2004-2015 Hangzhou H3C Tech. Co., Ltd. All rights reserved.
2: sysObjectID.0 enterprises.25506.1.771
3: sysUpTime.0 114 days, 7:47:48.79
4: sysContact.0 temp
5: sysName.0 TS_DX_MSR5660
6: sysLocation.0 Hangzhou, China
7: sysServices.0 78

这个设备的nqa的MIB库在哪儿寻找，MIB-BROWSER软件有下载的地方吗

组网及组网描述：

最佳答案

笃行之

笃行之八段

粉丝：20人关注：3人

mib库都是通用的，

MIB-新华三集团-H3C

MIB-BROWSER收费的只能百度了

可以百度net-snmp小软件读取测试

HH3C-NQA-MIB

This MIB should be supported by device which implements disman ping function. This MIB cannot mix using with CLI.

Scalar objects

Object (OID)	Access	PDS	Comments
hh3cNqaMIBVersion (1.3.6.1.4.1.25506.8.3.1.1)	read-only	No	As per MIB
hh3cNqaAgentEnable (1.3.6.1.4.1.25506.8.3.1.5)	read-write	Current	Default value is enable(1).
hh3cNqaServerEnable (1.3.6.1.4.1.25506.8.3.1.8)	read-write	Current	As per MIB
hh3cNqaStatsMaxGroupNumber (1.3.6.1.4.1.25506.8.3.1.9)	read-only	Current	As per MIB

hh3cNqaCtlTable

OID: 1.3.6.1.4.1.25506.8.3.1.2

· The parameter which is not supported by the corresponding pingCtlType cannot be configured.

· Once the configuration is modified, the result, histories, and statistics of the corresponding entry will be cleared.

· The results, histories and statistics must be the factual reflection of the test results of current configurations.

· Users will be puzzled when they get the results which caused by the previous configurations.

· If the parameter which is not supported by the corresponding pingCtlType is read, the result is invalid.

· The following table shows the relationship between pingCtlType and parameters.

Value of pingCtlType

Support parameters

pingIcmpEcho

hh3cNqaCtlTTL

hh3cNqaCtlHistoryKeptTime

hh3cNqaCtlHistoryEnable

hh3cNqaCtlVPNInstance

pingUdpEcho

hh3cNqaUdpEcho

hh3cNqaCtlTargetPort

hh3cNqaCtlSourcePort

hh3cNqaCtlTTL

hh3cNqaCtlHistoryKeptTime

hh3cNqaCtlHistoryEnable

hh3cNqaCtlVPNInstance

pingSnmpQuery

hh3cNqaCtlSourcePort

hh3cNqaCtlTTL

hh3cNqaCtlHistoryKeptTime

hh3cNqaCtlHistoryEnable

hh3cNqaCtlVPNInstance

pingTcpConnectionAttempt

hh3cNqaTcpconnect

hh3cNqaCtlTargetPort

hh3cNqaCtlTTL

hh3cNqaCtlHistoryKeptTime

hh3cNqaCtlHistoryEnable

hh3cNqaCtlVPNInstance

hh3cNqajitter ( for UDP-jitter test )

hh3cNqaCtlCodecType is defined as notDefined(1)

hh3cNqaCtlTargetPort

hh3cNqaCtlSourcePort

hh3cNqaCtlTTL

hh3cNqaCtlJitterAdminInterval

hh3cNqaCtlJitterAdminNumPackets

hh3cNqaCtlCodecType

hh3cNqaCtlVPNInstance

hh3cNqajitter ( for voice test )

hh3cNqaCtlCodecType is defined as g711Alaw(2)、g711Ulaw(3) or g729A(4)

hh3cNqaCtlTargetPort

hh3cNqaCtlSourcePort

hh3cNqaCtlTTL

hh3cNqaCtlJitterAdminInterval

hh3cNqaCtlJitterAdminNumPackets

hh3cNqaCtlICPIFAdvFactor

hh3cNqaCtlCodecType

hh3cNqaCtlVPNInstance

hh3cNqajitter ( for ICMP-jitter test )

hh3cNqaCtlCodecType is defined as icmpTimestamp(5)

hh3cNqaCtlTTL

hh3cNqaCtlJitterAdminInterval

hh3cNqaCtlJitterAdminNumPackets

hh3cNqaCtlCodecType

hh3cNqaCtlVPNInstance

hh3cNqaHttp

hh3cNqaCtlTTL

hh3cNqaCtlHistoryKeptTime

hh3cNqaCtlHistoryEnable

hh3cNqaCtlHttpOperationType

hh3cNqaCtlHttpOperationString

hh3cNqaCtlVPNInstance

hh3cNqadlsw

hh3cNqaCtlTTL

hh3cNqaCtlHistoryKeptTime

hh3cNqaCtlHistoryEnable

hh3cNqaCtlVPNInstance

hh3cNqadhcp

hh3cNqaCtlHistoryKeptTime

hh3cNqaCtlHistoryEnable

hh3cNqaCtlVPNInstance

hh3cNqaftp

hh3cNqaCtlTTL

hh3cNqaCtlHistoryKeptTime

hh3cNqaCtlHistoryEnable

hh3cNqaCtlFtpOperationType

hh3cNqaCtlFtpUsername

hh3cNqaCtlFtpPassword

hh3cNqaCtlFtpOperationString

hh3cNqaCtlVPNInstance

Object (OID)	Access	PDS	Comments
hh3cNqaCtlTargetPort (1.3.6.1.4.1.25506.8.3.1.2.1.1)	read-create	Current	Range from 0 to 65535 If the value of pingCtlType is “pingUdpEcho” or “pingTcpConnectionAttempt”, the value of this object must be 7. If the value of pingCtlType is "hh3cNqaUdpEcho" or "hh3cNqaTcpconnect", the value of this object cannot be 7.
hh3cNqaCtlSourcePort (1.3.6.1.4.1.25506.8.3.1.2.1.2)	read-create	Current	Range from 0 to 65535
hh3cNqaCtlTTL (1.3.6.1.4.1.25506.8.3.1.2.1.3)	read-create	Current	Range from 1 to 255
hh3cNqaCtlJitterAdminInterval (1.3.6.1.4.1.25506.8.3.1.2.1.4)	read-create	Current	Range from 10 to 60000
hh3cNqaCtlJitterAdminNumPackets (1.3.6.1.4.1.25506.8.3.1.2.1.5)	read-create	Current	For ICMP-jitter and UDP-jitter tests, the value range is 10 to 1000,and the default value is 10. For the voice test, the value range is 10 to 60000, and the default value is 1000. The object is available only forICMP-jitter, voice and UDP-jitter tests.
hh3cNqaCtlHttpOperationType (1.3.6.1.4.1.25506.8.3.1.2.1.6)	read-create	Current	As per MIB
hh3cNqaCtlHttpOperationString (1.3.6.1.4.1.25506.8.3.1.2.1.7)	read-create	Current	When config the raw type of hh3cNqaCtlHttpOperationType, the length of url is from 0 to 1023. The following details are for the get and post type of hh3cNqaCtlHttpOperationType. This object include two parts, the first part is resource and the second is http version. The resource is a part of URL. The common format of URL is http://host/resource. The length of resource is from 0 to 246 . The resource is case-sensitive. The version supports “HTTP/1.0” and “HTTP/1.1”(case- insensitive). The default value of this object is v1.0. The value of this object must have one space and only one space. The space is the separator of resource and version. If the value of this object is zero-length string, the resource and version are set to default value.
hh3cNqaCtlFtpOperationType (1.3.6.1.4.1.25506.8.3.1.2.1.8)	read-create	Current	As per MIB
hh3cNqaCtlFtpUsername (1.3.6.1.4.1.25506.8.3.1.2.1.9)	read-create	Current	As per MIB
hh3cNqaCtlFtpPassword (1.3.6.1.4.1.25506.8.3.1.2.1.10)	read-create	Current	As per MIB
hh3cNqaCtlFtpOperationString (1.3.6.1.4.1.25506.8.3.1.2.1.11)	read-create	Current	For put operation of hh3cNqaCtlFtpOperationType, the length of this object is from 1 to 200; For get operation of hh3cNqaCtlFtpOperationType, the length of this object is from 1 to 247.
hh3cNqaCtlVPNInstance (1.3.6.1.4.1.25506.8.3.1.2.1.12)	read-create	Current	The length of this object is from 0 to 31. If the product does not support VPN feature, this object cannot be set.
hh3cNqaCtlHistoryKeptTime (1.3.6.1.4.1.25506.8.3.1.2.1.13)	read-create	Current	As per MIB
hh3cNqaCtlHistoryEnable (1.3.6.1.4.1.25506.8.3.1.2.1.14)	read-create	Current	As per MIB
hh3cNqaCtlICPIFAdvFactor (1.3.6.1.4.1.25506.8.3.1.2.1.15)	read-create	Current	Range from 0 to 20
hh3cNqaCtlCodecType (1.3.6.1.4.1.25506.8.3.1.2.1.16)	read-create	Current	If the corresponding pingCtlType is not hh3cNqajitter, this object is invalid. For the UDP-jitter test, the corresponding pingCtlType is hh3cNqajitter and this object is set to notDefined. For the voice test, the corresponding pingCtlType is hh3cNqajitter and this object is set to g711Alaw, g711Ulaw or g729A. For the ICMP-jitter test, the corresponding pingCtlType is hh3cNqajitter and this object is set to icmpTimestamp. If the object value is changed to represent a new test type, the system performs the following operations: · Deletes the entry of the old test type. Creates the entry of the new test type with default settings. The currently supported values are notDefined, g711Alaw, g711Ulaw, g729A and icmpTimestamp.

hh3cNqaResultsTable

OID: 1.3.6.1.4.1.25506.8.3.1.3

Object (OID)	Access	PDS	Comments
hh3cNqaResultsRttNumDisconnects (1.3.6.1.4.1.25506.8.3.1.3.1.1)	read-only	No	As per MIB
hh3cNqaResultsRttTimeouts (1.3.6.1.4.1.25506.8.3.1.3.1.2)	read-only	No	As per MIB
hh3cNqaResultsRttBusies (1.3.6.1.4.1.25506.8.3.1.3.1.3)	read-only	No	Not supported
hh3cNqaResultsRttNoConnections (1.3.6.1.4.1.25506.8.3.1.3.1.4)	read-only	No	As per MIB
hh3cNqaResultsRttDrops (1.3.6.1.4.1.25506.8.3.1.3.1.5)	read-only	No	As per MIB
hh3cNqaResultsRttSequenceErrors (1.3.6.1.4.1.25506.8.3.1.3.1.6)	read-only	No	As per MIB
hh3cNqaResultsRttStatsErrors (1.3.6.1.4.1.25506.8.3.1.3.1.7)	read-only	No	As per MIB
hh3cNqaResultsMaxDelaySD (1.3.6.1.4.1.25506.8.3.1.3.1.8)	read-only	No	As per MIB
hh3cNqaResultsMaxDelayDS (1.3.6.1.4.1.25506.8.3.1.3.1.9)	read-only	No	As per MIB
hh3cNqaResultsLostPacketRatio (1.3.6.1.4.1.25506.8.3.1.3.1.10)	read-only	No	The value of this object reflects the drop rate of all kinds of tests included in DISMAN-PING-MIB MIB and HH3C-NQA-MIB MIB.
hh3cNqaResultsPacketLateArrival (1.3.6.1.4.1.25506.8.3.1.3.1.11)	read-only	No	As per MIB
hh3cNqaResultsRttSum (1.3.6.1.4.1.25506.8.3.1.3.1.12)	read-only	No	As per MIB
hh3cNqaResultsNumOfDelaySD (1.3.6.1.4.1.25506.8.3.1.3.1.13)	read-only	No	As per MIB
hh3cNqaResultsMinDelaySD (1.3.6.1.4.1.25506.8.3.1.3.1.14)	read-only	No	As per MIB
hh3cNqaResultsSumDelaySD (1.3.6.1.4.1.25506.8.3.1.3.1.15)	read-only	No	As per MIB
hh3cNqaResultsSum2DelaySD (1.3.6.1.4.1.25506.8.3.1.3.1.16)	read-only	No	As per MIB
hh3cNqaResultsNumOfDelayDS (1.3.6.1.4.1.25506.8.3.1.3.1.17)	read-only	No	As per MIB
hh3cNqaResultsMinDelayDS (1.3.6.1.4.1.25506.8.3.1.3.1.18)	read-only	No	As per MIB
hh3cNqaResultsSumDelayDS (1.3.6.1.4.1.25506.8.3.1.3.1.19)	read-only	No	As per MIB
hh3cNqaResultsSum2DelayDS (1.3.6.1.4.1.25506.8.3.1.3.1.20)	read-only	No	As per MIB

hh3cNqaJitterStatsTable

OID: 1.3.6.1.4.1.25506.8.3.1.4

Object (OID)	Access	PDS	Comments
hh3cNqaJitterStatsNumOfRTT (1.3.6.1.4.1.25506.8.3.1.4.1.1)	read-only	No	As per MIB
hh3cNqaJitterStatsMinOfPositivesSD (1.3.6.1.4.1.25506.8.3.1.4.1.2)	read-only	No	As per MIB
hh3cNqaJitterStatsMaxOfPositivesSD (1.3.6.1.4.1.25506.8.3.1.4.1.3)	read-only	No	As per MIB
hh3cNqaJitterStatsNumOfPositivesSD (1.3.6.1.4.1.25506.8.3.1.4.1.4)	read-only	No	As per MIB
hh3cNqaJitterStatsSumOfPositivesSD (1.3.6.1.4.1.25506.8.3.1.4.1.5)	read-only	No	As per MIB
hh3cNqaJitterStatsSum2PositivesSD (1.3.6.1.4.1.25506.8.3.1.4.1.6)	read-only	No	As per MIB
hh3cNqaJitterStatsMinOfNegativesSD (1.3.6.1.4.1.25506.8.3.1.4.1.7)	read-only	No	As per MIB
hh3cNqaJitterStatsMaxOfNegativesSD (1.3.6.1.4.1.25506.8.3.1.4.1.8)	read-only	No	As per MIB
hh3cNqaJitterStatsNumOfNegativesSD (1.3.6.1.4.1.25506.8.3.1.4.1.9)	read-only	No	As per MIB
hh3cNqaJitterStatsSumOfNegativesSD (1.3.6.1.4.1.25506.8.3.1.4.1.10)	read-only	No	As per MIB
hh3cNqaJitterStatsSum2NegativesSD (1.3.6.1.4.1.25506.8.3.1.4.1.11)	read-only	No	As per MIB
hh3cNqaJitterStatsMinOfPositivesDS (1.3.6.1.4.1.25506.8.3.1.4.1.12)	read-only	No	As per MIB
hh3cNqaJitterStatsMaxOfPositivesDS (1.3.6.1.4.1.25506.8.3.1.4.1.13)	read-only	No	As per MIB
hh3cNqaJitterStatsNumOfPositivesDS (1.3.6.1.4.1.25506.8.3.1.4.1.14)	read-only	No	As per MIB
hh3cNqaJitterStatsSumOfPositivesDS (1.3.6.1.4.1.25506.8.3.1.4.1.15)	read-only	No	As per MIB
hh3cNqaJitterStatsSum2PositivesDS (1.3.6.1.4.1.25506.8.3.1.4.1.16)	read-only	No	As per MIB
hh3cNqaJitterStatsMinOfNegativesDS (1.3.6.1.4.1.25506.8.3.1.4.1.17)	read-only	No	As per MIB
hh3cNqaJitterStatsMaxOfNegativesDS (1.3.6.1.4.1.25506.8.3.1.4.1.18)	read-only	No	As per MIB
hh3cNqaJitterStatsNumOfNegativesDS (1.3.6.1.4.1.25506.8.3.1.4.1.19)	read-only	No	As per MIB
hh3cNqaJitterStatsSumOfNegativesDS (1.3.6.1.4.1.25506.8.3.1.4.1.20)	read-only	No	As per MIB
hh3cNqaJitterStatsSum2NegativesDS (1.3.6.1.4.1.25506.8.3.1.4.1.21)	read-only	No	As per MIB
hh3cNqaJitterStatsPacketLossSD (1.3.6.1.4.1.25506.8.3.1.4.1.22)	read-only	No	As per MIB
hh3cNqaJitterStatsPacketLossDS (1.3.6.1.4.1.25506.8.3.1.4.1.23)	read-only	No	As per MIB
hh3cNqaJitterStatsAvePositivesSD (1.3.6.1.4.1.25506.8.3.1.4.1.24)	read-only	No	If the difference between intervals from source to destination of two sequential packets within a group of packets is positive, statistical times should add 1, and statistical summation should add the difference. The value of this object is the result of following expression: (statistical summation)/ (statistical times).
hh3cNqaJitterStatsAveNegativesSD (1.3.6.1.4.1.25506.8.3.1.4.1.25)	read-only	No	If the difference between intervals from source to destination of two sequential packets within a group of packets is negative, statistical times should add 1, and statistical summation should add the absolute value of the difference. The value of this object is the result of following expression: (statistical summation)/ (statistical times).
hh3cNqaJitterStatsAvePositivesDS (1.3.6.1.4.1.25506.8.3.1.4.1.26)	read-only	No	If the difference between intervals from destination to source of two sequential packets within a group of packets is positive, statistical times should add 1, and statistical summation should add the difference. The value of this object is the result of following expression: (statistical summation)/ (statistical times).
hh3cNqaJitterStatsAveNegativesDS (1.3.6.1.4.1.25506.8.3.1.4.1.27)	read-only	No	If the difference between intervals from destination to source of two sequential packets within a group of packets is negative, statistical times should add 1, and statistical summation should add the absolute value of the difference. The value of this object is the result of following expression: (statistical summation)/( statistical times).
hh3cNqaJitterStatsPktLossUnknown (1.3.6.1.4.1.25506.8.3.1.4.1.28)	read-only	No	The number of packets which lost but not knowing result
hh3cNqaJitterStatsOperOfICPIF (1.3.6.1.4.1.25506.8.3.1.4.1.29)	read-only	No	Only voice test is supported.
hh3cNqaJitterStatsOperOfMOS (1.3.6.1.4.1.25506.8.3.1.4.1.30)	read-only	No	Only voice test is supported the value of this object is 100 times of the actual value.
hh3cNqaJitterStatsAveSD (1.3.6.1.4.1.25506.8.3.1.4.1.31)	read-only	No	As per MIB
hh3cNqaJitterStatsAveDS (1.3.6.1.4.1.25506.8.3.1.4.1.32)	read-only	No	As per MIB

hh3cNqaTcpServerTable

OID: 1.3.6.1.4.1.25506.8.3.1.6

Object (OID)	Access	PDS	Comments
hh3cNqaTcpServerIpAddress (1.3.6.1.4.1.25506.8.3.1.6.1.1)	not-accessible	Current	Only support ipv4 address.
hh3cNqaTcpServerPort (1.3.6.1.4.1.25506.8.3.1.6.1.2)	not-accessible	Current	Range from 1 to 65535
hh3cNqaTcpServerRowStatus (1.3.6.1.4.1.25506.8.3.1.6.1.3)	read-create	Current	Only support active(1), createAndgo(4) and destroy(6)

hh3cNqaUdpServerTable

OID: 1.3.6.1.4.1.25506.8.3.1.7

Object (OID)	Access	PDS	Comments
hh3cNqaUdpServerIpAddress (1.3.6.1.4.1.25506.8.3.1.7.1.1)	not-accessible	Current	Only support ipv4 address.
hh3cNqaUdpServerPort (1.3.6.1.4.1.25506.8.3.1.7.1.2)	not-accessible	Current	Range from 1 to 65535
hh3cNqaUdpServerRowStatus (1.3.6.1.4.1.25506.8.3.1.7.1.3)	read-create	Current	Only support active(1) ,createAndgo(4) and destroy(6)

hh3cNqaStatisticsCtlTable

OID: 1.3.6.1.4.1.25506.8.3.1.10

Object (OID)	Access	PDS	Comments
hh3cNqaCtlStatisticsInterval (1.3.6.1.4.1.25506.8.3.1.10.1.1)	read-create	Current	Range from 1 to 35791394(in minutes), default value is 60.
hh3cNqaCtlStatisticsGroupNumber (1.3.6.1.4.1.25506.8.3.1.10.1.2)	read-create	Current	Range from 0 to hh3cNqaStatsMaxGroupNumber, default value is 2. If the value of this object is 0, statistics will not be created.
hh3cNqaCtlStatisticsKeptTime (1.3.6.1.4.1.25506.8.3.1.10.1.3)	read-create	Current	Range from 1 to 1440(in minutes), default value is 120.
hh3cNqaCtlBeginTime (1.3.6.1.4.1.25506.8.3.1.10.1.4)	read-create	Current	Time format must be abided. The year is range from 2000 to 2035.
hh3cNqaCtlLifeTime (1.3.6.1.4.1.25506.8.3.1.10.1.5)	read-create	Current	Range from 1 to 2147483647 (in seconds), The value of 4294967295 means the test will never stop.

hh3cNqaStatisticsResultsTable

OID: 1.3.6.1.4.1.25506.8.3.1.11

Object (OID)	Access	PDS	Comments
hh3cNqaStatResIndex (1.3.6.1.4.1.25506.8.3.1.11.1.1)	not-accessible	No	As per MIB
hh3cNqaStatResIpTargetAddressType (1.3.6.1.4.1.25506.8.3.1.11.1.2)	read-only	No	As per MIB
hh3cNqaStatResIpTargetAddress (1.3.6.1.4.1.25506.8.3.1.11.1.3)	read-only	No	As per MIB
hh3cNqaStatResMinRtt (1.3.6.1.4.1.25506.8.3.1.11.1.4)	read-only	No	As per MIB
hh3cNqaStatResMaxRtt (1.3.6.1.4.1.25506.8.3.1.11.1.5)	read-only	No	As per MIB
hh3cNqaStatResAverageRtt (1.3.6.1.4.1.25506.8.3.1.11.1.6)	read-only	No	As per MIB
hh3cNqaStatResProbeResponses (1.3.6.1.4.1.25506.8.3.1.11.1.7)	read-only	No	As per MIB
hh3cNqaStatResSentProbes (1.3.6.1.4.1.25506.8.3.1.11.1.8)	read-only	No	As per MIB
hh3cNqaStatResRttSumOfSquares (1.3.6.1.4.1.25506.8.3.1.11.1.9)	read-only	No	As per MIB
hh3cNqaStatResStartTime (1.3.6.1.4.1.25506.8.3.1.11.1.10)	read-only	No	As per MIB
hh3cNqaStatResInterval (1.3.6.1.4.1.25506.8.3.1.11.1.11)	read-only	No	As per MIB
hh3cNqaStatResRttNumDisconnects (1.3.6.1.4.1.25506.8.3.1.11.1.12)	read-only	No	As per MIB
hh3cNqaStatResRttTimeouts (1.3.6.1.4.1.25506.8.3.1.11.1.13)	read-only	No	As per MIB
hh3cNqaStatResRttBusies (1.3.6.1.4.1.25506.8.3.1.11.1.14)	read-only	No	As per MIB
hh3cNqaStatResRttNoConnections (1.3.6.1.4.1.25506.8.3.1.11.1.15)	read-only	No	As per MIB
hh3cNqaStatResRttDrops (1.3.6.1.4.1.25506.8.3.1.11.1.16)	read-only	No	As per MIB
hh3cNqaStatResRttSequenceErrors (1.3.6.1.4.1.25506.8.3.1.11.1.17)	read-only	No	As per MIB
hh3cNqaStatResRttErrors (1.3.6.1.4.1.25506.8.3.1.11.1.18)	read-only	No	As per MIB
hh3cNqaStatResLostPacketRatio (1.3.6.1.4.1.25506.8.3.1.11.1.19)	read-only	No	As per MIB
hh3cNqaStatResPacketLateArrival (1.3.6.1.4.1.25506.8.3.1.11.1.20)	read-only	No	As per MIB
hh3cNqaStatResRttSum (1.3.6.1.4.1.25506.8.3.1.11.1.21)	read-only	No	As per MIB
hh3cNqaStatResNumOfDelaySD (1.3.6.1.4.1.25506.8.3.1.11.1.22)	read-only	No	As per MIB
hh3cNqaStatResMinDelaySD (1.3.6.1.4.1.25506.8.3.1.11.1.23)	read-only	No	As per MIB
hh3cNqaStatResMaxDelaySD (1.3.6.1.4.1.25506.8.3.1.11.1.24)	read-only	No	As per MIB
hh3cNqaStatResSumDelaySD (1.3.6.1.4.1.25506.8.3.1.11.1.25)	read-only	No	As per MIB
hh3cNqaStatResSum2DelaySD (1.3.6.1.4.1.25506.8.3.1.11.1.26)	read-only	No	As per MIB
hh3cNqaStatResNumOfDelayDS (1.3.6.1.4.1.25506.8.3.1.11.1.27)	read-only	No	As per MIB
hh3cNqaStatResMinDelayDS (1.3.6.1.4.1.25506.8.3.1.11.1.28)	read-only	No	As per MIB
hh3cNqaStatResMaxDelayDS (1.3.6.1.4.1.25506.8.3.1.11.1.29)	read-only	No	As per MIB
hh3cNqaStatResSumDelayDS (1.3.6.1.4.1.25506.8.3.1.11.1.30)	read-only	No	As per MIB
hh3cNqaStatResSum2DelayDS (1.3.6.1.4.1.25506.8.3.1.11.1.31)	read-only	No	As per MIB

hh3cNqaGroupStatsJitterTable

OID: 1.3.6.1.4.1.25506.8.3.1.12

Object (OID)	Access	PDS	Comments
hh3cNqaStatJitterIndex (1.3.6.1.4.1.25506.8.3.1.12.1.1)	not-accessible	No	As per MIB
hh3cNqaStatJitterMinOfPosSD (1.3.6.1.4.1.25506.8.3.1.12.1.2)	read-only	No	As per MIB
hh3cNqaStatJitterMaxOfPosSD (1.3.6.1.4.1.25506.8.3.1.12.1.3)	read-only	No	As per MIB
hh3cNqaStatJitterNumOfPosSD (1.3.6.1.4.1.25506.8.3.1.12.1.4)	read-only	No	As per MIB
hh3cNqaStatJitterSumOfPosSD (1.3.6.1.4.1.25506.8.3.1.12.1.5)	read-only	No	As per MIB
hh3cNqaStatJitterSumOfSquarePosSD (1.3.6.1.4.1.25506.8.3.1.12.1.6)	read-only	No	As per MIB
hh3cNqaStatJitterMinOfNegSD (1.3.6.1.4.1.25506.8.3.1.12.1.7)	read-only	No	As per MIB
hh3cNqaStatJitterMaxOfNegSD (1.3.6.1.4.1.25506.8.3.1.12.1.8)	read-only	No	As per MIB
hh3cNqaStatJitterNumOfNegSD (1.3.6.1.4.1.25506.8.3.1.12.1.9)	read-only	No	As per MIB
hh3cNqaStatJitterSumOfNegSD (1.3.6.1.4.1.25506.8.3.1.12.1.10)	read-only	No	As per MIB
hh3cNqaStatJitterSumOfSquareNegSD (1.3.6.1.4.1.25506.8.3.1.12.1.11)	read-only	No	As per MIB
hh3cNqaStatJitterMinOfPosDS (1.3.6.1.4.1.25506.8.3.1.12.1.12)	read-only	No	As per MIB
hh3cNqaStatJitterMaxOfPosDS (1.3.6.1.4.1.25506.8.3.1.12.1.13)	read-only	No	As per MIB
hh3cNqaStatJitterNumOfPosDS (1.3.6.1.4.1.25506.8.3.1.12.1.14)	read-only	No	As per MIB
hh3cNqaStatJitterSumOfPosDS (1.3.6.1.4.1.25506.8.3.1.12.1.15)	read-only	No	As per MIB
hh3cNqaStatJitterSumOfSquarePosDS (1.3.6.1.4.1.25506.8.3.1.12.1.16)	read-only	No	As per MIB
hh3cNqaStatJitterMinOfNegDS (1.3.6.1.4.1.25506.8.3.1.12.1.17)	read-only	No	As per MIB
hh3cNqaStatJitterMaxOfNegDS (1.3.6.1.4.1.25506.8.3.1.12.1.18)	read-only	No	As per MIB
hh3cNqaStatJitterNumOfNegDS (1.3.6.1.4.1.25506.8.3.1.12.1.19)	read-only	No	As per MIB
hh3cNqaStatJitterSumOfNegDS (1.3.6.1.4.1.25506.8.3.1.12.1.20)	read-only	No	As per MIB
hh3cNqaStatJitterSumOfSquareNegDS (1.3.6.1.4.1.25506.8.3.1.12.1.21)	read-only	No	As per MIB
hh3cNqaStatJitterPacketLossSD (1.3.6.1.4.1.25506.8.3.1.12.1.22)	read-only	No	As per MIB
hh3cNqaStatJitterPacketLossDS (1.3.6.1.4.1.25506.8.3.1.12.1.23)	read-only	No	As per MIB
hh3cNqaStatJitterAvePosSD (1.3.6.1.4.1.25506.8.3.1.12.1.24)	read-only	No	As per MIB
hh3cNqaStatJitterAveNegSD (1.3.6.1.4.1.25506.8.3.1.12.1.25)	read-only	No	As per MIB
hh3cNqaStatJitterAvePosDS (1.3.6.1.4.1.25506.8.3.1.12.1.26)	read-only	No	As per MIB
hh3cNqaStatJitterAveNegDS (1.3.6.1.4.1.25506.8.3.1.12.1.27)	read-only	No	As per MIB
hh3cNqaStatJitterPktLossUnknown (1.3.6.1.4.1.25506.8.3.1.12.1.28)	read-only	No	As per MIB
hh3cNqaStatJitterMaxOfICPIF (1.3.6.1.4.1.25506.8.3.1.12.1.29)	read-only	No	Only voice test is supported
hh3cNqaStatJitterMinOfICPIF (1.3.6.1.4.1.25506.8.3.1.12.1.30)	read-only	No	Only voice test is supported
hh3cNqaStatJitterMaxOfMOS (1.3.6.1.4.1.25506.8.3.1.12.1.31)	read-only	No	Only voice test is supported ,the value of this object is 100 times of the actual value
hh3cNqaStatJitterMinOfMOS (1.3.6.1.4.1.25506.8.3.1.12.1.32)	read-only	No	Only voice test is supported ,the value of this object is 100 times of the actual value
hh3cNqaStatJitterAveSD (1.3.6.1.4.1.25506.8.3.1.12.1.33)	read-only	No	As per MIB
hh3cNqaStatJitterAveDS (1.3.6.1.4.1.25506.8.3.1.12.1.34)	read-only	No	As per MIB

hh3cNqaReactionTable

OID: 1.3.6.1.4.1.25506.8.3.1.13

Object (OID)	Access	PDS	Comments
hh3cNqaReactOwnerIndex (1.3.6.1.4.1.25506.8.3.1.13.1.1)	accessible-for-notify	No	As per MIB
hh3cNqaReactTestName (1.3.6.1.4.1.25506.8.3.1.13.1.2)	accessible-for-notify	No	As per MIB
hh3cNqaReactItemIndex (1.3.6.1.4.1.25506.8.3.1.13.1.3)	accessible-for-notify	No	As per MIB
hh3cNqaReactCheckedElement (1.3.6.1.4.1.25506.8.3.1.13.1.4)	read-create	No	As per MIB
hh3cNqaReactThresholdUpperLimit (1.3.6.1.4.1.25506.8.3.1.13.1.5)	read-create	No	Ranges from 1 to 100 when the value of hh3cNqaReactCheckedElement is "icpif". Ranges from 1 to 500 when the value of hh3cNqaReactCheckedElement is "mos". Ranges from 0 to 3600000 (in milliseconds) when the value of hh3cNqaReactCheckedElement is "jittersd", "jitterds", "jitterOwdSD", "jitterOwdDS", "jitterrtt" or "probetime". The value of this object shouldn't be set in other cases.
hh3cNqaReactThresholdLowerLimit (1.3.6.1.4.1.25506.8.3.1.13.1.6)	read-create	No	Ranges from 1 to 100 when the value of hh3cNqaReactCheckedElement is "icpif". Ranges from 1 to 500 when the value of hh3cNqaReactCheckedElement is "mos". Ranges from 0 to 3600000 (in milliseconds) when the value of hh3cNqaReactCheckedElement is "jittersd", "jitterds", "jitterOwdSD", "jitterOwdDS", "jitterrtt" or "probetime". The value of this object shouldn't be set in other cases.
hh3cNqaReactThresholdType (1.3.6.1.4.1.25506.8.3.1.13.1.7)	read-create	No	The value of this object can be set to "average" or "accumulative" when the value of hh3cNqaReactCheckedElement is "jittersd" or "jitterds". The value of this object can be set to "accumulative" when the value of hh3cNqaReactCheckedElement is "jitterpacketloss". The value of this object can be set to "average", "consecutive" or "accumulative" when the value of hh3cNqaReactCheckedElement is "probetime". The value of this object can be set to "consecutive" or "accumulative" when the value of hh3cNqaReactCheckedElement is "probefailure". The value of this object can be set to "average" or "accumulative" when the value of hh3cNqaReactCheckedElement is "jitterrtt". The value of this object shouldn't be set in other cases.
hh3cNqaReactThresholdConsecNum (1.3.6.1.4.1.25506.8.3.1.13.1.8)	read-create	No	Ranges from 1 to 16 when the value of hh3cNqaReactCheckedElement is "probetime" or "probefailure". The value of this object shouldn't be set in other cases.
hh3cNqaReactThresholdAccumNum (1.3.6.1.4.1.25506.8.3.1.13.1.9)	read-create	No	The object value range is 1 to 14999 if the value of hh3cNqaReactCheckedElement is "jittersd" or "jitterds" and the test type is ICMP-jitter or UDP-jitter. The object value range is 1 to 59999 if the value of hh3cNqaReactCheckedElement is "jittersd" or "jitterds" and the test type is voice. The object value range is 1 to 15000 if the value of hh3cNqaReactCheckedElement is "jitterpacketloss" or "jitterrtt" and the test type is ICMP-jitter or UDP-jitter. The object value range is 1 to 60000 if the value of hh3cNqaReactCheckedElement is "jitterpacketloss" or "jitterrtt" and the test type is voice. Ranges from 1 to 15 when the value of hh3cNqaReactCheckedElement is "probetime" or "probefailure". The value of this object shouldn't be set in other cases.
hh3cNqaReactActionType (1.3.6.1.4.1.25506.8.3.1.13.1.10)	read-create	No	The value of this object can be set to "none" or "trapOnly" when the value of hh3cNqaReactCheckedElement is "icpif", "mos", "jittersd", "jitterds", "jitterpacketloss", "probetime" or "jitterrtt". The value of this object can be set to "none", "trapOnly" or "triggerOnly" when the value of hh3cNqaReactCheckedElement is "probefailure". The value of this object shouldn't be set in other cases.
hh3cNqaReactCurrentStatus (1.3.6.1.4.1.25506.8.3.1.13.1.11)	read-only	No	As per MIB
hh3cNqaReactRowStatus (1.3.6.1.4.1.25506.8.3.1.13.1.12)	read-create	No	As per MIB
hh3cNqaReactCheckedNum (1.3.6.1.4.1.25506.8.3.1.13.1.13)	read-only	No	As per MIB
hh3cNqaReactThresholdNum (1.3.6.1.4.1.25506.8.3.1.13.1.14)	read-only	No	As per MIB

hh3cNqaStatisticsReactionTable

OID: 1.3.6.1.4.1.25506.8.3.1.14

Object (OID)	Access	PDS	Comments
hh3cNqaStatReactOwnerIndex (1.3.6.1.4.1.25506.8.3.1.14.1.1)	not-accessible	No	As per MIB
hh3cNqaStatReactTestName (1.3.6.1.4.1.25506.8.3.1.14.1.2)	not-accessible	No	As per MIB
hh3cNqaStatReactIndex (1.3.6.1.4.1.25506.8.3.1.14.1.3)	not-accessible	No	As per MIB
hh3cNqaStatReactItemIndex (1.3.6.1.4.1.25506.8.3.1.14.1.4)	not-accessible	No	As per MIB
hh3cNqaStatReactCheckedNum (1.3.6.1.4.1.25506.8.3.1.14.1.5)	read-only	No	As per MIB
hh3cNqaStatReactThresholdNum (1.3.6.1.4.1.25506.8.3.1.14.1.6)	read-only	No	As per MIB

hh3cNqaTcpExtendServerTable

OID of this table is: 1.3.6.1.4.1.25506.8.3.1.15

Name	Access	PDS	Description
hh3cNqaTcpServerExtIpAddress (1.3.6.1.4.1.25506.8.3.1.15.1.1)	not-accessible	Current	As per MIB
hh3cNqaTcpServerExtPort (1.3.6.1.4.1.25506.8.3.1.15.1.2)	not-accessible	Current	Range from 1 to 65535
hh3cNqaTcpServerExtVPNType (1.3.6.1.4.1.25506.8.3.1.15.1.3)	not-accessible	Current	Only support public(1) and vpn(2).
hh3cNqaTcpServerExtVPNInstance (1.3.6.1.4.1.25506.8.3.1.15.1.4)	not-accessible	Current	The length of this object is from 0 to 31. For set operation: If the NQA server listens on the public network, the value of hh3cNqaTcpServerExtVPNType must be public(1) and the value of this object can be set to any non-printable character string. If the NQA server listens on the private network, the value of hh3cNqaTcpServerExtVPNType must be vpn(2) and the value of this object can be set to any non-printable character string. For get operation: If the NQA server listens on the public network, the value of the objecet can be public
hh3cNqaTcpServerExtDSField (1.3.6.1.4.1.25506.8.3.1.15.1.5)	read-create	Current	As per MIB
hh3cNqaTcpServerExtRowStatus (1.3.6.1.4.1.25506.8.3.1.15.1.6)	read-create	Current	Only support active(1), createAndgo(4) and destroy(6)

hh3cNqaUdpExtendServerTable

OID of this table is: 1.3.6.1.4.1.25506.8.3.1.16

Name	Access	PDS	Description
hh3cNqaUdpServerExtIpAddress (1.3.6.1.4.1.25506.8.3.1.16.1.1)	not-accessible	Current	As per MIB
hh3cNqaUdpServerExtPort (1.3.6.1.4.1.25506.8.3.1.16.1.2)	not-accessible	Current	Range from 1 to 65535
hh3cNqaUdpServerExtVPNType (1.3.6.1.4.1.25506.8.3.1.16.1.3)	not-accessible	Current	Only support public(1) and vpn(2).
hh3cNqaUdpServerExtVPNInstance (1.3.6.1.4.1.25506.8.3.1.16.1.4)	not-accessible	Current	The length of this object is from 0 to 31. For set operation: If the NQA server listens on the public network, the value of hh3cNqaUdpServerExtVPNType must be public(1) and the value of this object can be set to any non-printable character string. If the NQA server listens on the private network, the value of hh3cNqaUdpServerExtVPNType must be vpn(2) and the value of this object can be set to any non-printable character string. For get operation: If the NQA server listens on the public network, the value of the objecet must be public.
hh3cNqaUdpServerExtDSField (1.3.6.1.4.1.25506.8.3.1.16.1.5)	read-create	Current	As per MIB
hh3cNqaUdpServerExtRowStatus (1.3.6.1.4.1.25506.8.3.1.16.1.6)	read-create	Current	Only support active(1), createAndgo(4) and destroy(6)