✖
每日一题
☺您本月已连续签到天,打败了0%的知了达人!
今日已答题
签到规则:
1.每日可签到答题一次,每签到一次可获得5积分,连续签到10天额外奖励50积分,连续签到20天以上额外奖励100积分;连续签到30天以上额外奖励200积分;
2.签到答题正确,获得经验值5点;
3.签到成功后,当天日期会有提示。
How to resolve the “Loading File Failed” issue when Upgrading the COMWARE in Bootrom Menu
c02952
Which requirements does the CID function have for hardware
冷志宇
Which protocols are used in VoIP implementation
What's the voice coding packetization length of the mid-range router during VoIP implementation
What’s the relationship between a voice coding/decoding mode and its occupied bandwidth
What’s the maximum length of the telephone cable from the FXS interface of router to the phone set
What shall I do if I cannot disconnect a VoIP call
When using VoIP, the Quidway mid-range-and-low-end routers detect that the telephone can ring but both parties in a call cannot hear each other during the interworking between VRP1.74-0010 and VRP1.74-0105. Why
What voice interfaces are available on the mid-range router at present
Which precautions shall be taken for the interworking between 1.7 and 1.6
HNDE Modules of H3C Series Routers
赵刚
Why did I hear a ring back tone instead of the busy tone while calling from a local FXS the voice card on the opposite Router2, which was currently busy?
FIC-GBE Modules of H3C Series Routers
FIC-GEF Modules of H3C Series Routers
Why is the tty test-key command not found on the port sometimes
MIM-GEF Modules of H3C Series Routers
Why is a tilde displayed on the terminal after each command when the dumb terminal runs normally
G.SHDSL Modules of H3C Series Routers
Why does the configuration fail to be deleted on mid-range routers (V1.74-0105)
FIC-FXS/FXO Modules of H3C Series Routers
1
...
1556
1557
1558
1559
1560
1561
1916
亲~登录后才可以操作哦!
亲~检测到您登陆的账号未在http://hclhub.h3c.com进行注册
注册后可访问此模块
你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作